Michael Geiger
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Michael Geiger has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
Ute Zschieschang
Max Planck Institute for Solid State Research Heisenbergstr. 1 70569 Stuttgart Germany
5 shared publications- Hagen Klauk
Max Planck Institute for Solid State Research, Heisenbergstr. 1, 70569 Stuttgart, Germany
4 shared publications Jürgen Weis
Max Planck Institute for Solid State Research, Heisenbergstr. 1, Stuttgart 70569, Germany
4 shared publicationsFlorian Letzkus
Institute for Microelectronics Stuttgart (IMS CHIPS) Allmandring 30A 70569 Stuttgart Germany
2 shared publicationsHagen Klauk
Max Planck Institute for Solid State Research, Stuttgart, Germany
2 shared publicationsJoachim N. Burghartz
Institute for Microelectronics Stuttgart (IMS CHIPS) Allmandring 30A 70569 Stuttgart Germany
2 shared publications
Latest Publications
- 6 January 2023
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 9 (1) , eadd3669
High-gain, low-voltage unipolar logic circuits based on nanoscale flexible organic thin-film transistors with small signal delays
One of the circuit topologies for the implementation of unipolar integrated circuits (circuits that use either p-channel or n-channel transistors, but not both) is the zero- V GS architecture. Zero- V GS circuits often provide excellent static performance (large small-signal gain and large noise margins), but they suffer from the large signal delay imposed by the load transistor. To address this limitation, we have used electron-beam lithography to fabricate zero- V GS circuits based on organic transistors with channel lengths as small as 120 nm on flexible polymeric substrates. For a supply voltage of 3 V, these circuits have characteristic signal-delay time constants of 14 ns for the low-to-high transition and 560 ns for the high-to-low transition of the circuit’s output voltage. These signal delays represent the best dynamic performance reported to date for organic transistor–based zero- V GS circuits. The signal-delay time constant of 14 ns is also the smallest signal delay reported to date for flexible organic transistors.
- 6 January 2023
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 9 (1) , eadd3669
High-gain, low-voltage unipolar logic circuits based on nanoscale flexible organic thin-film transistors with small signal delays
One of the circuit topologies for the implementation of unipolar integrated circuits (circuits that use either p-channel or n-channel transistors, but not both) is the zero- V GS architecture. Zero- V GS circuits often provide excellent static performance (large small-signal gain and large noise margins), but they suffer from the large signal delay imposed by the load transistor. To address this limitation, we have used electron-beam lithography to fabricate zero- V GS circuits based on organic transistors with channel lengths as small as 120 nm on flexible polymeric substrates. For a supply voltage of 3 V, these circuits have characteristic signal-delay time constants of 14 ns for the low-to-high transition and 560 ns for the high-to-low transition of the circuit’s output voltage. These signal delays represent the best dynamic performance reported to date for organic transistor–based zero- V GS circuits. The signal-delay time constant of 14 ns is also the smallest signal delay reported to date for flexible organic transistors.
- Open Access
- 5 January 2022
- Published by Wiley in Advanced Electronic Materials
- Vol. 8 (5) , 2101215
Subthreshold Swing of 59 mV decade−1 in Nanoscale Flexible Ultralow‐Voltage Organic Transistors
Organic thin‐film transistors (TFTs) that provide subthreshold swings near the theoretical limit together with large on/off current ratios at very low operating voltages require high‐capacitance gate dielectrics with a vanishingly small defect density. A promising approach to the fabrication of such dielectrics at temperatures sufficiently low to allow TFT fabrication on polymeric substrates are hybrid dielectrics consisting of a thin metal oxide layer in combination with a molecular self‐assembled monolayer (SAM). Here, the electrical and surface properties of titanium oxide produced by the plasma‐assisted oxidation of the surface of vacuum‐deposited titanium gate electrodes and its use as the first component of a hybrid TiOx/SAM gate dielectric in flexible organic TFTs are investigated. These transistors have a gate‐dielectric capacitance of about 1 µF cm−2, a subthreshold swing of 59 mV decade−1 (within measurement error of the physical limit at room temperature) for a wide range of channel lengths as small as 0.7 µm, and an on/off current ratio of 107 for a gate‐source‐voltage range of 1 V.
- 5 January 2022
- Published by Wiley in Advanced Electronic Materials
- Vol. 8 (5) , 2101215
Open AccessSubthreshold Swing of 59 mV decade−1 in Nanoscale Flexible Ultralow‐Voltage Organic Transistors
Organic thin‐film transistors (TFTs) that provide subthreshold swings near the theoretical limit together with large on/off current ratios at very low operating voltages require high‐capacitance gate dielectrics with a vanishingly small defect density. A promising approach to the fabrication of such dielectrics at temperatures sufficiently low to allow TFT fabrication on polymeric substrates are hybrid dielectrics consisting of a thin metal oxide layer in combination with a molecular self‐assembled monolayer (SAM). Here, the electrical and surface properties of titanium oxide produced by the plasma‐assisted oxidation of the surface of vacuum‐deposited titanium gate electrodes and its use as the first component of a hybrid TiOx/SAM gate dielectric in flexible organic TFTs are investigated. These transistors have a gate‐dielectric capacitance of about 1 µF cm−2, a subthreshold swing of 59 mV decade−1 (within measurement error of the physical limit at room temperature) for a wide range of channel lengths as small as 0.7 µm, and an on/off current ratio of 107 for a gate‐source‐voltage range of 1 V.
- Open Access
- 18 March 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-13
Optimizing the plasma oxidation of aluminum gate electrodes for ultrathin gate oxides in organic transistors
A critical requirement for the application of organic thin-film transistors (TFTs) in mobile or wearable applications is low-voltage operation, which can be achieved by employing ultrathin, high-capacitance gate dielectrics. One option is a hybrid dielectric composed of a thin film of aluminum oxide and a molecular self-assembled monolayer in which the aluminum oxide is formed by exposure of the surface of the aluminum gate electrode to a radio-frequency-generated oxygen plasma. This work investigates how the properties of such dielectrics are affected by the plasma power and the duration of the plasma exposure. For various combinations of plasma power and duration, the thickness and the capacitance of the dielectrics, the leakage-current density through the dielectrics, and the current–voltage characteristics of organic TFTs in which these dielectrics serve as the gate insulator have been evaluated. The influence of the plasma parameters on the surface properties of the dielectrics, the thin-film morphology of the vacuum-deposited organic-semiconductor films, and the resulting TFT characteristics has also been investigated.
- 18 March 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-13
Open AccessOptimizing the plasma oxidation of aluminum gate electrodes for ultrathin gate oxides in organic transistors
A critical requirement for the application of organic thin-film transistors (TFTs) in mobile or wearable applications is low-voltage operation, which can be achieved by employing ultrathin, high-capacitance gate dielectrics. One option is a hybrid dielectric composed of a thin film of aluminum oxide and a molecular self-assembled monolayer in which the aluminum oxide is formed by exposure of the surface of the aluminum gate electrode to a radio-frequency-generated oxygen plasma. This work investigates how the properties of such dielectrics are affected by the plasma power and the duration of the plasma exposure. For various combinations of plasma power and duration, the thickness and the capacitance of the dielectrics, the leakage-current density through the dielectrics, and the current–voltage characteristics of organic TFTs in which these dielectrics serve as the gate insulator have been evaluated. The influence of the plasma parameters on the surface properties of the dielectrics, the thin-film morphology of the vacuum-deposited organic-semiconductor films, and the resulting TFT characteristics has also been investigated.
- Open Access
- 29 March 2020
- Published by Wiley in Advanced Materials Interfaces
- Vol. 7 (10)
Effect of the Degree of the Gate‐Dielectric Surface Roughness on the Performance of Bottom‐Gate Organic Thin‐Film Transistors
In organic thin‐film transistors (TFTs) fabricated in the inverted (bottom‐gate) device structure, the surface roughness of the gate dielectric onto which the organic‐semiconductor layer is deposited is expected to have a significant effect on the TFT characteristics. To quantitatively evaluate this effect, a method to tune the surface roughness of a gate dielectric consisting of a thin layer of aluminum oxide and an alkylphosphonic acid self‐assembled monolayer over a wide range by controlling a single process parameter, namely the substrate temperature during the deposition of the aluminum gate electrodes, is developed. All other process parameters remain constant in the experiments, so that any differences observed in the TFT performance can be confidently ascribed to effects related to the difference in the gate‐dielectric surface roughness. It is found that an increase in surface roughness leads to a significant decrease in the effective charge‐carrier mobility and an increase in the subthreshold swing. It is shown that a larger gate‐dielectric surface roughness leads to a larger density of grain boundaries in the semiconductor layer, which in turn produces a larger density of localized trap states in the semiconductor.
- 29 March 2020
- Published by Wiley in Advanced Materials Interfaces
- Vol. 7 (10)
Open AccessEffect of the Degree of the Gate‐Dielectric Surface Roughness on the Performance of Bottom‐Gate Organic Thin‐Film Transistors
In organic thin‐film transistors (TFTs) fabricated in the inverted (bottom‐gate) device structure, the surface roughness of the gate dielectric onto which the organic‐semiconductor layer is deposited is expected to have a significant effect on the TFT characteristics. To quantitatively evaluate this effect, a method to tune the surface roughness of a gate dielectric consisting of a thin layer of aluminum oxide and an alkylphosphonic acid self‐assembled monolayer over a wide range by controlling a single process parameter, namely the substrate temperature during the deposition of the aluminum gate electrodes, is developed. All other process parameters remain constant in the experiments, so that any differences observed in the TFT performance can be confidently ascribed to effects related to the difference in the gate‐dielectric surface roughness. It is found that an increase in surface roughness leads to a significant decrease in the effective charge‐carrier mobility and an increase in the subthreshold swing. It is shown that a larger gate‐dielectric surface roughness leads to a larger density of grain boundaries in the semiconductor layer, which in turn produces a larger density of localized trap states in the semiconductor.
- 9 October 2018
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 10 (4) , 044023
Quantitative Analysis of the Density of Trap States in Semiconductors by Electrical Transport Measurements on Low-Voltage Field-Effect Transistors
A method for extracting the density and energetic distribution of the trap states in the semiconductor of a field-effect transistor from its measured transfer characteristics is investigated. The method is based on an established extraction scheme [M. Grünewald et al., Phys. Stat. Sol. B 100, K139 (1980)] and extends it to low-voltage thin-film transistors (TFTs). In order to demonstrate the significance of this extension, two types of TFTs are fabricated and analyzed: one with a thick gate dielectric and high operating voltage and one with a thin gate dielectric and low operating voltage. From the measured transfer characteristics of both TFTs, the density of states (DOS) is calculated using both the original and the extended Grünewald method. The results not only confirm the validity of the original Grünewald method for high-voltage transistors, but also indicate the need for the extended Grünewald method for the reliable extraction of the trap DOS in transistors with a thin gate dielectric and low operating voltage.
- 9 October 2018
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 10 (4) , 044023
Quantitative Analysis of the Density of Trap States in Semiconductors by Electrical Transport Measurements on Low-Voltage Field-Effect Transistors
A method for extracting the density and energetic distribution of the trap states in the semiconductor of a field-effect transistor from its measured transfer characteristics is investigated. The method is based on an established extraction scheme [M. Grünewald et al., Phys. Stat. Sol. B 100, K139 (1980)] and extends it to low-voltage thin-film transistors (TFTs). In order to demonstrate the significance of this extension, two types of TFTs are fabricated and analyzed: one with a thick gate dielectric and high operating voltage and one with a thin gate dielectric and low operating voltage. From the measured transfer characteristics of both TFTs, the density of states (DOS) is calculated using both the original and the extended Grünewald method. The results not only confirm the validity of the original Grünewald method for high-voltage transistors, but also indicate the need for the extended Grünewald method for the reliable extraction of the trap DOS in transistors with a thin gate dielectric and low operating voltage.
- 1 October 2018
- Published by Elsevier in Organic Electronics
- Vol. 61, 65-69
Stencil lithography for organic thin-film transistors with a channel length of 300 nm
- 1 October 2018
- Published by Elsevier in Organic Electronics
- Vol. 61, 65-69
Stencil lithography for organic thin-film transistors with a channel length of 300 nm
- Open Access
Structural and Electronic Properties of (TMTTF)2X Salts with Tetrahedral Anions
Comprehensive measurements of the pressure- and temperature-dependent dc-transport are combined with dielectric spectroscopy and structural considerations in order to elucidate the charge and anion orderings in the quasi-one-dimensional charge-transfer salts (TMTTF) with non-centrosymmetric anions X = BF , ClO and ReO . Upon applying hydrostatic pressure, the charge-order transition is suppressed in all three compounds, whereas the influence on the anion order clearly depends on the particular compound. A review of the structural properties paves the way for understanding the effect of the anions in their methyl cavities on the ordering. By determining the complex dielectric constant in different directions we obtain valuable information on the contribution of the anions to the dielectric properties. For (TMTTF) ClO and (TMTTF) ReO , exhibits an activated behavior of the relaxation time with activation energies similar to the gap measured in transport, indicating that the relaxation dynamics are determined by free charge carriers.Open AccessStructural and Electronic Properties of (TMTTF)2X Salts with Tetrahedral Anions
Comprehensive measurements of the pressure- and temperature-dependent dc-transport are combined with dielectric spectroscopy and structural considerations in order to elucidate the charge and anion orderings in the quasi-one-dimensional charge-transfer salts (TMTTF) with non-centrosymmetric anions X = BF , ClO and ReO . Upon applying hydrostatic pressure, the charge-order transition is suppressed in all three compounds, whereas the influence on the anion order clearly depends on the particular compound. A review of the structural properties paves the way for understanding the effect of the anions in their methyl cavities on the ordering. By determining the complex dielectric constant in different directions we obtain valuable information on the contribution of the anions to the dielectric properties. For (TMTTF) ClO and (TMTTF) ReO , exhibits an activated behavior of the relaxation time with activation energies similar to the gap measured in transport, indicating that the relaxation dynamics are determined by free charge carriers.