Qingxiu Jia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Qingxiu Jia has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
Ruixin Chen
Beijing Institute of Fashion Technology
5 shared publicationsShiyu Duan
Beijing Institute of Fashion Technology
4 shared publicationsTongyan Cui
4 shared publicationsLiqun Zhang
Center of Advanced Elastomer Materials, Beijing University of Chemical Technology Beijing China
3 shared publicationsShui Hu
3 shared publications- Zhongjian Ma
Institute of High Energy Physics, Chinese Academy of Sciences, Beijing, China
3 shared publications
Latest Publications
- 6 March 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (20) , e70645
A Novel Bio‐Based Unsaturated Copolyester With Tunable Structure and Properties: Synthesis, Characterization, and Performance of PPeSAB and Its Nano‐Silica Composites
Unsaturated polyesters (UPs) are widely used thermosetting polymers due to their excellent mechanical strength, chemical resistance, and processability. In this study, a novel bio‐based unsaturated copolyester, poly(1,5‐pentanediol‐co‐3,4‐butanediol succinate‐co‐adipate) (PPeSAB), was synthesized from bio‐derived 3,4‐butanediol, 1,5‐pentanediol, succinic acid, and adipic acid via a two‐step melt polycondensation. The synthesis was optimized to minimize side reactions, yielding high‐molecular‐weight copolyesters ( M n = 7.7 × 10 4 g/mol) with well‐controlled composition. By adjusting the monomer feed ratios, the material properties could be tuned from rigid plastic to soft elastomer, and the copolyesters exhibited excellent low‐temperature performance ( T g < −61°C). Incorporation of nano‐SiO 2 further improved mechanical strength, achieving tensile values comparable to linear low‐density polyethylene. The fully aliphatic ester backbone also suggests potential environmental advantages, associated with its highlighting the material's promise for sustainable polymer applications. These findings provide a rational strategy for designing bio‐based unsaturated polyesters with tunable thermal and mechanical properties.
- 6 March 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (20) , e70645
A Novel Bio‐Based Unsaturated Copolyester With Tunable Structure and Properties: Synthesis, Characterization, and Performance of PPeSAB and Its Nano‐Silica Composites
Unsaturated polyesters (UPs) are widely used thermosetting polymers due to their excellent mechanical strength, chemical resistance, and processability. In this study, a novel bio‐based unsaturated copolyester, poly(1,5‐pentanediol‐co‐3,4‐butanediol succinate‐co‐adipate) (PPeSAB), was synthesized from bio‐derived 3,4‐butanediol, 1,5‐pentanediol, succinic acid, and adipic acid via a two‐step melt polycondensation. The synthesis was optimized to minimize side reactions, yielding high‐molecular‐weight copolyesters ( M n = 7.7 × 10 4 g/mol) with well‐controlled composition. By adjusting the monomer feed ratios, the material properties could be tuned from rigid plastic to soft elastomer, and the copolyesters exhibited excellent low‐temperature performance ( T g < −61°C). Incorporation of nano‐SiO 2 further improved mechanical strength, achieving tensile values comparable to linear low‐density polyethylene. The fully aliphatic ester backbone also suggests potential environmental advantages, associated with its highlighting the material's promise for sustainable polymer applications. These findings provide a rational strategy for designing bio‐based unsaturated polyesters with tunable thermal and mechanical properties.
- 27 November 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (8)
Fe 3 O 4 @Polydopamine/Polylactic Acid Composite Fibers With Improved Sterilization and Air Filtration Efficiency by Surface Coating Enhanced Photothermal Stability of Fe 3 O 4
Air pollution and bacterial infection have become global problems, especially in the field of medical and health care. With the ever‐developing nanomaterials and photothermal sterilization technology, electrospinning photothermal nanofibers provide an effective way to solve the problem of air pollution and bacterial infection. Iron oxide (Fe 3 O 4 ) nanoparticles have been used as independent photothermal materials due to their excellent photothermal properties, and biodegradability. However, due to the nano‐effect, the surface is more easily oxidized to gamma iron (III) oxide (γ‐Fe 2 O 3 ), which in turn affects its photothermal properties. To address this, we coated Fe 3 O 4 with polydopamine (PDA) and incorporated it into polylactic acid (PLA) nanofibers via electrospinning, fabricating Fe 3 O 4 /PLA and Fe 3 O 4 @PDA/PLA composites. We found that Fe 3 O 4 @PDA/PLA fibers showed a more excellent photothermal effect. The highest temperature of 3%‐Fe 3 O 4 @PDA/PLA fibers was 74.7°C, which was 12.1°C higher than that of 3%‐Fe 3 O 4 /PLA fibers. More importantly, due to the effect of the PDA protective layer, the photothermal stability of the fibers was effectively enhanced. After 90 days of storage, the maximum temperature change Δ T of 3%‐Fe 3 O 4 @PDA/PLA fibers was reduced to 4.5°C (Δ T of 3%‐Fe 3 O 4 /PLA was 8.7°C). The photothermal sterilization rate of gram‐negative Escherichia coli ( E. coli ) and gram‐positive Staphylococcus aureus ( S. aureus ) reached 99.0% and 97.8%, respectively. Furthermore, the Fe 3 O 4 @PDA/PLA photothermal fibers had high filtration efficiency (99.58%) and low pressure drop (42.3 Pa).
- 27 November 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (8)
Fe 3 O 4 @Polydopamine/Polylactic Acid Composite Fibers With Improved Sterilization and Air Filtration Efficiency by Surface Coating Enhanced Photothermal Stability of Fe 3 O 4
Air pollution and bacterial infection have become global problems, especially in the field of medical and health care. With the ever‐developing nanomaterials and photothermal sterilization technology, electrospinning photothermal nanofibers provide an effective way to solve the problem of air pollution and bacterial infection. Iron oxide (Fe 3 O 4 ) nanoparticles have been used as independent photothermal materials due to their excellent photothermal properties, and biodegradability. However, due to the nano‐effect, the surface is more easily oxidized to gamma iron (III) oxide (γ‐Fe 2 O 3 ), which in turn affects its photothermal properties. To address this, we coated Fe 3 O 4 with polydopamine (PDA) and incorporated it into polylactic acid (PLA) nanofibers via electrospinning, fabricating Fe 3 O 4 /PLA and Fe 3 O 4 @PDA/PLA composites. We found that Fe 3 O 4 @PDA/PLA fibers showed a more excellent photothermal effect. The highest temperature of 3%‐Fe 3 O 4 @PDA/PLA fibers was 74.7°C, which was 12.1°C higher than that of 3%‐Fe 3 O 4 /PLA fibers. More importantly, due to the effect of the PDA protective layer, the photothermal stability of the fibers was effectively enhanced. After 90 days of storage, the maximum temperature change Δ T of 3%‐Fe 3 O 4 @PDA/PLA fibers was reduced to 4.5°C (Δ T of 3%‐Fe 3 O 4 /PLA was 8.7°C). The photothermal sterilization rate of gram‐negative Escherichia coli ( E. coli ) and gram‐positive Staphylococcus aureus ( S. aureus ) reached 99.0% and 97.8%, respectively. Furthermore, the Fe 3 O 4 @PDA/PLA photothermal fibers had high filtration efficiency (99.58%) and low pressure drop (42.3 Pa).
- 22 May 2025
- Published by Springer Nature
- p. 553-559
Mechanical Properties and Structure of Melt-Spun Fibers from Recycled PET Chips
- 22 May 2025
- Published by Springer Nature
- p. 553-559
Mechanical Properties and Structure of Melt-Spun Fibers from Recycled PET Chips
- 22 May 2025
- Published by Springer Nature
- p. 537-544
Effect of Hydrophilic Yarn Type and Fabric Density on Directional Water Transport Performance for Knitted Fabric
- 22 May 2025
- Published by Springer Nature
- p. 537-544
Effect of Hydrophilic Yarn Type and Fabric Density on Directional Water Transport Performance for Knitted Fabric
- 22 May 2025
- Published by Springer Nature
- p. 545-552
Effect of Composite Structure on the Mechanical Properties of Aramid/Recycled PET Composite Yarns
- 22 May 2025
- Published by Springer Nature
- p. 545-552
Effect of Composite Structure on the Mechanical Properties of Aramid/Recycled PET Composite Yarns
- Top Cited Papers
- 19 March 2025
- Published by Elsevier in Chemical Engineering Journal
- Vol. 510
Solid membrane-based aqueous lithium extraction and adsorption: Advances, challenges, and prospects
- 19 March 2025
- Published by Elsevier in Chemical Engineering Journal
- Vol. 510
Top Cited PapersSolid membrane-based aqueous lithium extraction and adsorption: Advances, challenges, and prospects
- Open Access
- 9 January 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (2) , 1125-1133
Unidirectional moisture-conducting green fabrics prepared by a one-step electrospray technique
Unidirectional moisture-conducting fabrics were prepared by electrospraying polyvinylidene fluoride (PVDF) and polyvinyl chloride (PVC) onto three green fabric substrates, namely cotton, hemp, and modal. Experiments were conducted to examine the effects of coating thickness, coating material, and substrate material on the moisture conductivity of the fabrics. The electrospraying technique was effective in forming uniform and strongly adhered PVDF and PVC coatings on the fabric substrates, and the coating thickness and material type had a significant effect on the fabric's moisture conductivity. The PVDF and PVC coatings significantly improved the unidirectional moisture conductivity of the fabric substrates, and although the unidirectional moisture conductivity effects differed among the substrates, all fabrics exhibited high directional water transport capacities (R values greater than 300%), high air permeabilities, and high water vapor transmission rates. Cotton and hemp substrates coated with hydrophobic layers showed more efficient unidirectional moisture transfer than modal fabrics. This study demonstrated that appropriate coating design and substrate selection can significantly improve the moisture conductivity of fabrics, providing a valuable reference for the development of high-performance functional textiles.
- 9 January 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (2) , 1125-1133
Open AccessUnidirectional moisture-conducting green fabrics prepared by a one-step electrospray technique
Unidirectional moisture-conducting fabrics were prepared by electrospraying polyvinylidene fluoride (PVDF) and polyvinyl chloride (PVC) onto three green fabric substrates, namely cotton, hemp, and modal. Experiments were conducted to examine the effects of coating thickness, coating material, and substrate material on the moisture conductivity of the fabrics. The electrospraying technique was effective in forming uniform and strongly adhered PVDF and PVC coatings on the fabric substrates, and the coating thickness and material type had a significant effect on the fabric's moisture conductivity. The PVDF and PVC coatings significantly improved the unidirectional moisture conductivity of the fabric substrates, and although the unidirectional moisture conductivity effects differed among the substrates, all fabrics exhibited high directional water transport capacities (R values greater than 300%), high air permeabilities, and high water vapor transmission rates. Cotton and hemp substrates coated with hydrophobic layers showed more efficient unidirectional moisture transfer than modal fabrics. This study demonstrated that appropriate coating design and substrate selection can significantly improve the moisture conductivity of fabrics, providing a valuable reference for the development of high-performance functional textiles.
- 24 June 2024
- Published by Wiley in Polymer Engineering & Science
- Vol. 64 (8) , 3617-3628
Preparation and properties of biodegradable directional water transport composite fabrics
Moisture (i.e., sweat) management is essential for maintaining human physiological comfort. But conventional fabrics and moisture‐absorbent and quick‐drying fabrics cannot simultaneously possess directional water transport (DWT) functionality and environmental protection characteristics, while also causing a sticky sensation on the skin when worn. Herein, the polylactic acid (PLA) electrospun membranes were deposited on the PLA side of a double‐yarn weft‐knitted fabric (hydrophobic PLA filament and hydrophilic cotton yarn) with asymmetric wettability, and green composite fabrics with papillary structures and unidirectional moisture transport capability were obtained using hot‐press. The properties of these composite fabrics were evaluated by scanning electron microscopy, moisture management testing, dynamic scanning calorimetry, water contact angle (WCA), and water permeability. The results showed that the wettability gradient difference between the two sides of the fabric increased, enhancing the unidirectional moisture transport capability. The optimal performance composite fabric achieved an accumulative one‐way transport capacity of 1285% and an overall moisture management capacity of 0.693. Additionally, the WCA on the hydrophobic side measured 150°, remaining at 146.8° after two washes. Overall, this composite fabric strikes a balance between biodegradability and exceptional DWT performance, rendering it an environmentally friendly and recyclable choice for moisture‐wicking and quick‐drying apparel applications.Highlights: Created PLA/cotton‐knitted fabric with asymmetric wettability. Hydrophobic PLA membrane deposited on fabric surface using electrospinning. Green composite fabrics with excellent DWT functionality were made by hot‐press. Best composite fabric: R‐value 1285.6%, OMMC 0.696, WCA 150°. Best composite fabric retains WCA of 146.8° after two washes.
- 24 June 2024
- Published by Wiley in Polymer Engineering & Science
- Vol. 64 (8) , 3617-3628
Preparation and properties of biodegradable directional water transport composite fabrics
Moisture (i.e., sweat) management is essential for maintaining human physiological comfort. But conventional fabrics and moisture‐absorbent and quick‐drying fabrics cannot simultaneously possess directional water transport (DWT) functionality and environmental protection characteristics, while also causing a sticky sensation on the skin when worn. Herein, the polylactic acid (PLA) electrospun membranes were deposited on the PLA side of a double‐yarn weft‐knitted fabric (hydrophobic PLA filament and hydrophilic cotton yarn) with asymmetric wettability, and green composite fabrics with papillary structures and unidirectional moisture transport capability were obtained using hot‐press. The properties of these composite fabrics were evaluated by scanning electron microscopy, moisture management testing, dynamic scanning calorimetry, water contact angle (WCA), and water permeability. The results showed that the wettability gradient difference between the two sides of the fabric increased, enhancing the unidirectional moisture transport capability. The optimal performance composite fabric achieved an accumulative one‐way transport capacity of 1285% and an overall moisture management capacity of 0.693. Additionally, the WCA on the hydrophobic side measured 150°, remaining at 146.8° after two washes. Overall, this composite fabric strikes a balance between biodegradability and exceptional DWT performance, rendering it an environmentally friendly and recyclable choice for moisture‐wicking and quick‐drying apparel applications.Highlights: Created PLA/cotton‐knitted fabric with asymmetric wettability. Hydrophobic PLA membrane deposited on fabric surface using electrospinning. Green composite fabrics with excellent DWT functionality were made by hot‐press. Best composite fabric: R‐value 1285.6%, OMMC 0.696, WCA 150°. Best composite fabric retains WCA of 146.8° after two washes.
- Open Access
- 10 April 2024
- Published by Elsevier in Nuclear Engineering and Technology
- Vol. 56 (9) , 3545-3552
Monte Carlo simulation and optimization of neutron ray shielding performance of related materials
- 10 April 2024
- Published by Elsevier in Nuclear Engineering and Technology
- Vol. 56 (9) , 3545-3552
Open AccessMonte Carlo simulation and optimization of neutron ray shielding performance of related materials
- Open Access
Research progress on sustainability of key tire materials
In recent years, countries worldwide have engaged actively in the research and development of green and sustainable materials in the face of the increasing depletion of petroleum resources, the need to reduce material waste, and the environmental pollution caused by the various types of waste. In the tire industry, the key materials for the various components of tires are mostly dependent on petroleum resources. Development of green tires and green processing technologies using sustainable materials is an important development direction for the future of the tire industry, and many tire‐manufacturing companies have proposed their visions for the development of eco‐friendly tires. Rubber, cord fabric, and additives are the main materials used in tire manufacturing. This article summarizes the research status of the green materials that can meet the requirements of environmental friendliness and sustainability, replace traditional materials, and reduce petroleum resource consumption in existing tire production. These materials mainly include natural rubber or bio‐based synthetic rubber, green renewable cord fabrics, and green processing additives. The prospects for the application of these new green materials in tire manufacturing are also discussed.
Open AccessResearch progress on sustainability of key tire materials
In recent years, countries worldwide have engaged actively in the research and development of green and sustainable materials in the face of the increasing depletion of petroleum resources, the need to reduce material waste, and the environmental pollution caused by the various types of waste. In the tire industry, the key materials for the various components of tires are mostly dependent on petroleum resources. Development of green tires and green processing technologies using sustainable materials is an important development direction for the future of the tire industry, and many tire‐manufacturing companies have proposed their visions for the development of eco‐friendly tires. Rubber, cord fabric, and additives are the main materials used in tire manufacturing. This article summarizes the research status of the green materials that can meet the requirements of environmental friendliness and sustainability, replace traditional materials, and reduce petroleum resource consumption in existing tire production. These materials mainly include natural rubber or bio‐based synthetic rubber, green renewable cord fabrics, and green processing additives. The prospects for the application of these new green materials in tire manufacturing are also discussed.