Solen Kinayyigit
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Solen Kinayyigit has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Abdullah Uysal
Nanocatalysis and Clean Energy Technologies Laboratory, Institute of Nanotechnology, Gebze Technical University, 41400 Kocaeli, Turkey
1 shared publication - Abdullah Uysal
Gebze Technical University
1 shared publication - Ahmet Musap Mert1 shared publication
- Begüm Yarar Kaplan
Sabanci University Nanotechnology Research and Application Center
1 shared publication - Ece Arici1 shared publication
- Emre Biçer
Battery Research Laboratory, Faculty of Engineering and Natural Sciences, Sivas University of Science and Technology, 58010 Sivas, Türkiye
1 shared publication
Latest Publications
- 18 March 2026
- Published by Trans Tech Publications, Ltd. in Journal of Nano Research
- Vol. 91, 1-14
Rapid Exfoliation of Hexagonal Boron Nitride in a Less-Volatile Co-Solvent with a High Dispersion Concentration
Hexagonal boron nitride nanosheets (BNNSs), are among the most prominent layered two-dimensional (2D) nanomaterials due to their superior thermal, electrical, and dielectric properties. However, their strong interlayer bonding limits efficient exfoliation into few-layer structures. In this study, a mixed-solvent strategy based on 1-cyclohexyl-2-pyrrolidone (CHP) and deionized water was developed for rapid and scalable production of BNNSs via sonication-assisted liquid-phase exfoliation (LPE). A CHP/water ratio of 1:20 enabled stable dispersion of exfoliated hBN at a concentration of 1.05 mg/mL, with 56% of the starting material delaminated. Atomic force microscopy (AFM) analysis revealed that 16.8% of the exfoliated product consisted of nanosheets thinner than five layersafter a fast exfoliation. In contrast, exfoliation using IPA/water (3:7) under identical conditions yielded predominantly thick, stacked hBN structures. Spectroscopic and microscopic analyses, including UV–Vis, FTIR, XRD, and Raman, confirmed effective delamination and structural preservation of CHP-exfoliated BNNSs. These results highlight the critical role of solvent composition and demonstrate the superior performance of CHP-based systems as a co-solvent for time-efficient exfoliation. This scalable and safer approach can be adapted for other layered materials and holds strong potential for expanding the use of BNNSs in advanced technological applications.
- 18 March 2026
- Published by Trans Tech Publications, Ltd. in Journal of Nano Research
- Vol. 91, 1-14
Rapid Exfoliation of Hexagonal Boron Nitride in a Less-Volatile Co-Solvent with a High Dispersion Concentration
Hexagonal boron nitride nanosheets (BNNSs), are among the most prominent layered two-dimensional (2D) nanomaterials due to their superior thermal, electrical, and dielectric properties. However, their strong interlayer bonding limits efficient exfoliation into few-layer structures. In this study, a mixed-solvent strategy based on 1-cyclohexyl-2-pyrrolidone (CHP) and deionized water was developed for rapid and scalable production of BNNSs via sonication-assisted liquid-phase exfoliation (LPE). A CHP/water ratio of 1:20 enabled stable dispersion of exfoliated hBN at a concentration of 1.05 mg/mL, with 56% of the starting material delaminated. Atomic force microscopy (AFM) analysis revealed that 16.8% of the exfoliated product consisted of nanosheets thinner than five layersafter a fast exfoliation. In contrast, exfoliation using IPA/water (3:7) under identical conditions yielded predominantly thick, stacked hBN structures. Spectroscopic and microscopic analyses, including UV–Vis, FTIR, XRD, and Raman, confirmed effective delamination and structural preservation of CHP-exfoliated BNNSs. These results highlight the critical role of solvent composition and demonstrate the superior performance of CHP-based systems as a co-solvent for time-efficient exfoliation. This scalable and safer approach can be adapted for other layered materials and holds strong potential for expanding the use of BNNSs in advanced technological applications.
- 1 August 2025
- Published by World Scientific Pub Co Pte Ltd in Functional Materials Letters
- Vol. 18 (06)
Hexagonal boron nitride-assisted fabrication of lithium-rich antiperovskite superionic conductor
In this study, Ba-doped Li3OCl antiperovskite solid electrolytes and their hexagonal boron nitride (hBN)-reinforced composites were successfully synthesized via a hydrothermal method followed by rapid solidification. Liquid-phase exfoliated hBN nanosheets were incorporated at 2 wt.% and 5 wt.% to investigate their effects on the structure and ion transport properties. X-ray diffraction (XRD) analysis revealed a reduction in crystallinity and increased amorphous phase content in the re-melted and hBN-containing samples. Differential scanning calorimetry (DSC) showed a glass transition temperature ([ ][ ]) at [ ]97[ ]C for the pure Ba-doped Li3OCl, which shifted to 107[ ]C upon hBN addition, indicating enhanced thermal stability. Morphological studies confirmed hBN-enhanced densification (82% theoretical density), reducing microporosity and improving interfacial stability. Electrochemical impedance spectroscopy (EIS) revealed that the ionic conductivity of Ba-doped Li3OCl demonstrated ionic conductivities of 0.28 mS/cm (40[ ]C) and 12 mS/cm (160[ ]C) for pure samples ([ ][ ][ ]0.32 eV), while 2 wt.% hBN composites achieved 0.77 mS/cm (40[ ]C) along with the same activation energy. 0.28 mS cm[ ] at 40[ ]C, increasing to 12 mS cm[ ] at 140[ ]C. However, 5 wt.% hBN led to high charge-transfer resistance (130 k[ ]/cm2), underscoring the need for optimal hBN content (<5 wt.%) to balance densification and conductivity. These results demonstrate that a small amount of hBN reinforcement supports densification, improves thermal stability and enables single-step processing, making it a promising strategy for developing antiperovskite-based electrolytes for high-performance solid-state batteries.
- 1 August 2025
- Published by World Scientific Pub Co Pte Ltd in Functional Materials Letters
- Vol. 18 (06)
Hexagonal boron nitride-assisted fabrication of lithium-rich antiperovskite superionic conductor
In this study, Ba-doped Li3OCl antiperovskite solid electrolytes and their hexagonal boron nitride (hBN)-reinforced composites were successfully synthesized via a hydrothermal method followed by rapid solidification. Liquid-phase exfoliated hBN nanosheets were incorporated at 2 wt.% and 5 wt.% to investigate their effects on the structure and ion transport properties. X-ray diffraction (XRD) analysis revealed a reduction in crystallinity and increased amorphous phase content in the re-melted and hBN-containing samples. Differential scanning calorimetry (DSC) showed a glass transition temperature ([ ][ ]) at [ ]97[ ]C for the pure Ba-doped Li3OCl, which shifted to 107[ ]C upon hBN addition, indicating enhanced thermal stability. Morphological studies confirmed hBN-enhanced densification (82% theoretical density), reducing microporosity and improving interfacial stability. Electrochemical impedance spectroscopy (EIS) revealed that the ionic conductivity of Ba-doped Li3OCl demonstrated ionic conductivities of 0.28 mS/cm (40[ ]C) and 12 mS/cm (160[ ]C) for pure samples ([ ][ ][ ]0.32 eV), while 2 wt.% hBN composites achieved 0.77 mS/cm (40[ ]C) along with the same activation energy. 0.28 mS cm[ ] at 40[ ]C, increasing to 12 mS cm[ ] at 140[ ]C. However, 5 wt.% hBN led to high charge-transfer resistance (130 k[ ]/cm2), underscoring the need for optimal hBN content (<5 wt.%) to balance densification and conductivity. These results demonstrate that a small amount of hBN reinforcement supports densification, improves thermal stability and enables single-step processing, making it a promising strategy for developing antiperovskite-based electrolytes for high-performance solid-state batteries.
- 1 May 2019
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 44 (27) , 14175-14183
An effective electrocatalyst based on platinum nanoparticles supported with graphene nanoplatelets and carbon black hybrid for PEM fuel cells
- 1 May 2019
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 44 (27) , 14175-14183
An effective electrocatalyst based on platinum nanoparticles supported with graphene nanoplatelets and carbon black hybrid for PEM fuel cells