Chunzhi Xia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Chunzhi Xia has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Jiasheng Zou
School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, China
2 shared publications - Xiangping Xu
School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, China
2 shared publications - Yi Wang
School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, China
2 shared publications - Chi Liu
School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, China
1 shared publication - Hengnan Ding
School of Materials Science and Engineering, Jiangsu University of Science and Techology, Zhenjiang 212003, China
1 shared publication
Latest Publications
- Open Access
Effect of Brazing Temperature on Microstructure and Properties of WC-10Ni + AgCuTi Composite Coatings
WC-10Ni + AgCuTi composite coating with WC mass fraction of 40% was prepared on the copper surface by vacuum brazing. The brazing temperatures were 830 °C, 860 °C, 890 °C, and 920 °C. The microstructure, interface structure, and hardness of the coating section were studied. The results showed that the composite coatings obtained at different brazing temperatures were better combined. As the brazing temperature increased, the Ni transition layer wrapped around the WC gradually decreased until it disappeared. The brazing seam gradually thickened, the reaction between the coating and the substrate became more and more intense, and more and more Cu was formed on both sides of the brazing seam. Scanning analysis of the interface between the coating and the substrate showed that the elements W and Ti hardly diffused into the brazing seam and the substrate, and the elements Ag and Cu diffused into the substrate. Finally, the interface between the brazing seam and the substrate was metallurgically bonded. The Vickers hardness results and bond strength results of the composite coatings show that the mechanical properties of the coatings are best when the brazing temperature is 890 °C.
Open AccessEffect of Brazing Temperature on Microstructure and Properties of WC-10Ni + AgCuTi Composite Coatings
WC-10Ni + AgCuTi composite coating with WC mass fraction of 40% was prepared on the copper surface by vacuum brazing. The brazing temperatures were 830 °C, 860 °C, 890 °C, and 920 °C. The microstructure, interface structure, and hardness of the coating section were studied. The results showed that the composite coatings obtained at different brazing temperatures were better combined. As the brazing temperature increased, the Ni transition layer wrapped around the WC gradually decreased until it disappeared. The brazing seam gradually thickened, the reaction between the coating and the substrate became more and more intense, and more and more Cu was formed on both sides of the brazing seam. Scanning analysis of the interface between the coating and the substrate showed that the elements W and Ti hardly diffused into the brazing seam and the substrate, and the elements Ag and Cu diffused into the substrate. Finally, the interface between the brazing seam and the substrate was metallurgically bonded. The Vickers hardness results and bond strength results of the composite coatings show that the mechanical properties of the coatings are best when the brazing temperature is 890 °C.
- Open Access
Effect of Brazing Temperature on the Microstructure and Chosen Properties of WC–10Ni/NiCrBSi Composite Coatings Produced by Vacuum Cladding from Flexible Coated Cloths
Three kinds of WC–10Ni/NiCrBSi composite coatings were prepared on the surface of Q235 carbon steel at 1015, 1055, and 1095 °C by vacuum brazing. The microstructure and properties of the composite coatings were investigated. The results showed that various reaction layers appeared at the bonding area of the coatings and the substrate. As the brazing temperature increased, the reaction layer between the solder and the hard phase gradually decreased and disappeared at 1095 °C. Simultaneously, the size of gray-white massive phases with a large amount of W in the brazing layer decreased gradually. When the brazing temperature increased, the Fe content markedly increased in the reaction layer of the matrix and the solder, indicating that the increase in brazing temperature was beneficial for metallurgical bonding between the coating and the substrate. Interface bonding strength and wear resistance were enhanced by the increase in brazing temperature; however, the microhardness of the composite coating section decreased. The interface bonding strength reached 362.9 MPa and the wear loss reached a minimum at 1095 °C.
Open AccessEffect of Brazing Temperature on the Microstructure and Chosen Properties of WC–10Ni/NiCrBSi Composite Coatings Produced by Vacuum Cladding from Flexible Coated Cloths
Three kinds of WC–10Ni/NiCrBSi composite coatings were prepared on the surface of Q235 carbon steel at 1015, 1055, and 1095 °C by vacuum brazing. The microstructure and properties of the composite coatings were investigated. The results showed that various reaction layers appeared at the bonding area of the coatings and the substrate. As the brazing temperature increased, the reaction layer between the solder and the hard phase gradually decreased and disappeared at 1095 °C. Simultaneously, the size of gray-white massive phases with a large amount of W in the brazing layer decreased gradually. When the brazing temperature increased, the Fe content markedly increased in the reaction layer of the matrix and the solder, indicating that the increase in brazing temperature was beneficial for metallurgical bonding between the coating and the substrate. Interface bonding strength and wear resistance were enhanced by the increase in brazing temperature; however, the microhardness of the composite coating section decreased. The interface bonding strength reached 362.9 MPa and the wear loss reached a minimum at 1095 °C.