Camila Laís Farrapo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Camila Laís Farrapo has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Deborah Nava Soratto
UFMS, campus de Chapadão do Sul
1 shared publication - José Benedito Guimarães Júnior
Federal University of Lavras, Brazil
1 shared publication - Lourival Marin Mendes
Federal University of Lavras, Brazil
1 shared publication - Mário Vanoli Scatolino
Department of Forest Science, State University of Amapá, Macapá, Brazil
1 shared publication - Rafael Farinassi Mendes
Department of Chemical and Materials Federal University of Lavras Lavras Brazil
1 shared publication - Thiago de Paula Protásio
Department of Forest Science, Federal University of Lavras – UFLA, Lavras, Brazil
1 shared publication
Latest Publications
- Open Access
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Floresta e Ambiente
- Vol. 26 (2)
Does the Addition of Cotton Wastes Affect the Properties of Particleboards?
A wide range of materials for the development of new products can be obtained from natural resources. Good examples of these materials are lignocellulosic wastes, which are a good alternative for the production of particleboards. This study aimed to evaluate the feasibility of using cotton wastes in association to eucalyptus particles in the production of particleboards. Cotton waste proportions used were 0, 10, 20 and 30%. Urea formaldehyde (UF) adhesive was applied at 12%, based on dry the weight of particles. Physical and mechanical tests were performed in order to evaluate panels. Water Absorption (2 and 24 h) and Internal Bond (IB) showed not significant effect with increased percentage of cotton waste. Thickness Swelling (2 and 24 h) of particleboards increased with increased percentage of waste material. The Modulus of Elasticity for cotton waste particleboards ranged from 726.47 ± 99.98 to 205.12 ± 66.24 MPa, while the Modulus of Rupture ranged from 8.63 ± 1.39 to 3.87 ± 0.75 MPa. According to results, cotton wastes could be added to particleboards up to the percentage of 9%, being indicated for the manufacture of some types of furniture such as doors and sides.
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Floresta e Ambiente
- Vol. 26 (2)
Open AccessDoes the Addition of Cotton Wastes Affect the Properties of Particleboards?
A wide range of materials for the development of new products can be obtained from natural resources. Good examples of these materials are lignocellulosic wastes, which are a good alternative for the production of particleboards. This study aimed to evaluate the feasibility of using cotton wastes in association to eucalyptus particles in the production of particleboards. Cotton waste proportions used were 0, 10, 20 and 30%. Urea formaldehyde (UF) adhesive was applied at 12%, based on dry the weight of particles. Physical and mechanical tests were performed in order to evaluate panels. Water Absorption (2 and 24 h) and Internal Bond (IB) showed not significant effect with increased percentage of cotton waste. Thickness Swelling (2 and 24 h) of particleboards increased with increased percentage of waste material. The Modulus of Elasticity for cotton waste particleboards ranged from 726.47 ± 99.98 to 205.12 ± 66.24 MPa, while the Modulus of Rupture ranged from 8.63 ± 1.39 to 3.87 ± 0.75 MPa. According to results, cotton wastes could be added to particleboards up to the percentage of 9%, being indicated for the manufacture of some types of furniture such as doors and sides.