Shaohua Wang
Research Subjects
Shaohua Wang has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
Bo Ren
School of Energy and Mining Engineering China University of Mining and Technology (Beijing) 100083 Beijing China
3 shared publications- Xianjie Hao
Inner Mongolia Research Institute, China University of Mining and Technology (Beijing), Ordos, China
3 shared publications Hanyang Li
2 shared publicationsJun-Hua Xue
State Key Laboratory of Deep Coal Mining & Environment Protection
2 shared publicationsYudong Zhu
2 shared publicationsBin Xu
1 shared publication
Latest Publications
- 27 April 2026
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 320
Effect of printing direction on in-plane mechanical response of honeycombs
- 27 April 2026
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 320
Effect of printing direction on in-plane mechanical response of honeycombs
- 18 April 2026
- Published by Elsevier in Thin-Walled Structures
- Vol. 227
The biaxial yield behaviour of honeycomb structures with different Poisson’s ratios
- 18 April 2026
- Published by Elsevier in Thin-Walled Structures
- Vol. 227
The biaxial yield behaviour of honeycomb structures with different Poisson’s ratios
- 10 April 2026
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 320
Constitutive modeling for anisotropic foams based solely on uniaxial compressions
- 10 April 2026
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 320
Constitutive modeling for anisotropic foams based solely on uniaxial compressions
- 11 December 2025
- Published by Elsevier in Thin-Walled Structures
- Vol. 220
Crashworthiness and multi-scenario applications of a kirigami-inspired truncated pyramid energy-absorbing structure
- 11 December 2025
- Published by Elsevier in Thin-Walled Structures
- Vol. 220
Crashworthiness and multi-scenario applications of a kirigami-inspired truncated pyramid energy-absorbing structure
- 3 September 2024
- Published by Elsevier in Thin-Walled Structures
- Vol. 205
Anisotropic mechanics of cell-elongated structures: Finite element study based on a 3D cellular model
- 3 September 2024
- Published by Elsevier in Thin-Walled Structures
- Vol. 205
Anisotropic mechanics of cell-elongated structures: Finite element study based on a 3D cellular model
- Open Access
- 25 March 2019
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2019, 1-17
Effect of Bedding Angle and Confining Pressure on the Brittleness of Geomaterials: A Case Study on Slate
Brittleness is one of the most significant properties of geomaterials. However, very few studies have been conducted on factors influencing the rock brittleness indices. In this paper, conventional triaxial compression tests were carried out to investigate the effects of confining pressure and bedding angle on the brittleness of slate. From the perspective of energy, brittleness is an index that could reflect the release rate of energy that accumulated in the slate under the effect of external energy after reaching peak strength. Therefore, a new brittleness index of slate based on postpeak energy release is proposed herein. The applicability of this index is illustrated by comparing with other five existing brittleness indices. The following results can be obtained. (1) The confining pressure exerts a great influence on the brittleness of slate. With the increase of confining pressure, the brittleness of slate decreases significantly. The dispersion of brittleness values of slate declines with increasing confining pressure. (2) There is a parabolic relationship between slate brittleness and bedding angle. As bedding angle increases, the brittleness is intensified and reaches its maximum at a bedding angle of about 45° and then decreases gradually. (3) In contrast to the previous indices, the brittleness index proposed in this paper can describe the whole process of the postpeak stage through an index of the energy release, which makes this measure more suitable for rock that has the characteristics of step-drop or bench-drop at the postpeak stage.
- 25 March 2019
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2019, 1-17
Open AccessEffect of Bedding Angle and Confining Pressure on the Brittleness of Geomaterials: A Case Study on Slate
Brittleness is one of the most significant properties of geomaterials. However, very few studies have been conducted on factors influencing the rock brittleness indices. In this paper, conventional triaxial compression tests were carried out to investigate the effects of confining pressure and bedding angle on the brittleness of slate. From the perspective of energy, brittleness is an index that could reflect the release rate of energy that accumulated in the slate under the effect of external energy after reaching peak strength. Therefore, a new brittleness index of slate based on postpeak energy release is proposed herein. The applicability of this index is illustrated by comparing with other five existing brittleness indices. The following results can be obtained. (1) The confining pressure exerts a great influence on the brittleness of slate. With the increase of confining pressure, the brittleness of slate decreases significantly. The dispersion of brittleness values of slate declines with increasing confining pressure. (2) There is a parabolic relationship between slate brittleness and bedding angle. As bedding angle increases, the brittleness is intensified and reaches its maximum at a bedding angle of about 45° and then decreases gradually. (3) In contrast to the previous indices, the brittleness index proposed in this paper can describe the whole process of the postpeak stage through an index of the energy release, which makes this measure more suitable for rock that has the characteristics of step-drop or bench-drop at the postpeak stage.
- Open Access
- 1 January 2019
- Published by Wiley in Advances in Civil Engineering
- Vol. 2019 (1)
Instability Process of Crack Propagation and Tunnel Failure Affected by Cross‐Sectional Geometry of an Underground Tunnel
The process of crack propagation and tunnel failure is affected by the cross‐sectional geometry of an underground tunnel. In order to quantify the effect of section shape on the process of crack propagation in deep tunnels under high ground stress conditions, a total of four physical models with two cross‐sectional shapes and twelve stress levels were designed and several large‐scale physical model tests were conducted. The results indicated that, when the vertical stress is 4.94 MPa, the length and depth of the cracks generated in the rock surrounding the horseshoe tunnel are about eight times that around a circular tunnel. The position where the circumferential displacement of the horseshoe tunnel begins to be stable is about two, to two and a half, times that around a circular tunnel. After the deep chamber was excavated, continuous spalling was found to occur at the foot of the horseshoe tunnel and microcracks in the surrounding rock were initially generated from the foot of the side wall and then developed upwards to form a conjugate sliding shape to the foot of the arch roof, where the cracks finally coalesced. Discontinuous spalling occurred at the midheight of the side wall of the circular tunnel after excavation, and microcracks in the surrounding rock were initially generated from the midheight of the side wall and then extended concentrically to greater depth in the rock mass surrounding the tunnel. Tensile failure mainly occurred on the surface of the side wall: shear failure mainly appeared in the surrounding rock.
- 1 January 2019
- Published by Wiley in Advances in Civil Engineering
- Vol. 2019 (1)
Open AccessInstability Process of Crack Propagation and Tunnel Failure Affected by Cross‐Sectional Geometry of an Underground Tunnel
The process of crack propagation and tunnel failure is affected by the cross‐sectional geometry of an underground tunnel. In order to quantify the effect of section shape on the process of crack propagation in deep tunnels under high ground stress conditions, a total of four physical models with two cross‐sectional shapes and twelve stress levels were designed and several large‐scale physical model tests were conducted. The results indicated that, when the vertical stress is 4.94 MPa, the length and depth of the cracks generated in the rock surrounding the horseshoe tunnel are about eight times that around a circular tunnel. The position where the circumferential displacement of the horseshoe tunnel begins to be stable is about two, to two and a half, times that around a circular tunnel. After the deep chamber was excavated, continuous spalling was found to occur at the foot of the horseshoe tunnel and microcracks in the surrounding rock were initially generated from the foot of the side wall and then developed upwards to form a conjugate sliding shape to the foot of the arch roof, where the cracks finally coalesced. Discontinuous spalling occurred at the midheight of the side wall of the circular tunnel after excavation, and microcracks in the surrounding rock were initially generated from the midheight of the side wall and then extended concentrically to greater depth in the rock mass surrounding the tunnel. Tensile failure mainly occurred on the surface of the side wall: shear failure mainly appeared in the surrounding rock.
- 15 September 2018
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 37 (3) , 1421-1434
Quantitative Evaluation Methods of Brittle Failure Characteristics of Coal: A Case Study of Hard Coal in China
- 15 September 2018
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 37 (3) , 1421-1434
Quantitative Evaluation Methods of Brittle Failure Characteristics of Coal: A Case Study of Hard Coal in China