Spencer Gilleon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Spencer Gilleon has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Genevieve Saur
National Renewable Energy Lab., Golden, CO (United States)
6 shared publications Sam Sprik
National Renewable Energy Laboratory (NREL), Golden, CO (United States)
6 shared publications- Jennifer Kurtz
National Renewable Energy Laboratory (NREL), Golden, CO (United States)
2 shared publications California Energy Commission
1 shared publicationChad Hunter
National Renewable Energy Laboratory (NREL), Golden, CO (United States)
1 shared publication- Jacob Thorson
Mechanical Engineering, University of Colorado Boulder, Boulder, CO 80309, USA
1 shared publication
Latest Publications
- Open Access
- 25 September 2025
- Published by Office of Scientific and Technical Information (OSTI)
Heavy-Duty Hydrogen Station Equipment Performance Device (HD HyStEP) Specifications and Design Considerations
The original Hydrogen Station Equipment Performance (HyStEP) device was commissioned in 2015 and was critical for the rapid validation of light-duty (LD) hydrogen fueling stations. As applications for hydrogen as a heavy-duty (HD) transportation fuel continue to grow, new heavy-duty stations are being developed to fuel these vehicles that require larger onboard storage tank systems to meet HD transportation demands and drive cycles. The differences in size and geometry from LD vehicles have driven the creation of new hydrogen fueling protocols that will enable safe and economical fueling of HD vehicles. With the new requirements that are set out in HD fueling protocols like SAE J601-5, a new HyStEP-like device is needed to evaluate the capabilities of high-flow hydrogen stations to fuel HD vehicles to the new protocol standard. To create a heavy-duty HyStEP (HD HyStEP) device, an effort has been undertaken to evaluate the requirements that would form the basis for the design of a successful HD HyStEP device. The primary design goal of this HD HyStEP device is its capability of following a test methodology similar to what is outlined in CSA HGV 4.3, which guides the validation of LD fueling dispensers but with adjustments to verify adherence to the HD fueling protocols (SAE J2601-5) for 70 MPa and 35 MPa pressure class vehicles rather than the LD fueling protocols (SAE J2601). The design presented here aims to provide information that enables the creation of an HD HyStEP device that achieves the primary design goal while being informed by the years of experience from the current HyStEP operators.
- 25 September 2025
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessHeavy-Duty Hydrogen Station Equipment Performance Device (HD HyStEP) Specifications and Design Considerations
The original Hydrogen Station Equipment Performance (HyStEP) device was commissioned in 2015 and was critical for the rapid validation of light-duty (LD) hydrogen fueling stations. As applications for hydrogen as a heavy-duty (HD) transportation fuel continue to grow, new heavy-duty stations are being developed to fuel these vehicles that require larger onboard storage tank systems to meet HD transportation demands and drive cycles. The differences in size and geometry from LD vehicles have driven the creation of new hydrogen fueling protocols that will enable safe and economical fueling of HD vehicles. With the new requirements that are set out in HD fueling protocols like SAE J601-5, a new HyStEP-like device is needed to evaluate the capabilities of high-flow hydrogen stations to fuel HD vehicles to the new protocol standard. To create a heavy-duty HyStEP (HD HyStEP) device, an effort has been undertaken to evaluate the requirements that would form the basis for the design of a successful HD HyStEP device. The primary design goal of this HD HyStEP device is its capability of following a test methodology similar to what is outlined in CSA HGV 4.3, which guides the validation of LD fueling dispensers but with adjustments to verify adherence to the HD fueling protocols (SAE J2601-5) for 70 MPa and 35 MPa pressure class vehicles rather than the LD fueling protocols (SAE J2601). The design presented here aims to provide information that enables the creation of an HD HyStEP device that achieves the primary design goal while being informed by the years of experience from the current HyStEP operators.
- Open Access
- 9 September 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 49, 287-302
Hydrogen station prognostics and health monitoring model
- 9 September 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 49, 287-302
Open AccessHydrogen station prognostics and health monitoring model
- 9 May 2023
- Published by Office of Scientific and Technical Information (OSTI)
Next Generation Hydrogen Station Composite Data Products: Retail Stations - Summer 2022: Data through Quarter 2 of 2022 [Slides]
This publication includes 54 composite data products (CDPs) produced for next generation hydrogen stations, with data through the second quarter of 2022.
- 9 May 2023
- Published by Office of Scientific and Technical Information (OSTI)
Next Generation Hydrogen Station Composite Data Products: Retail Stations - Summer 2022: Data through Quarter 2 of 2022 [Slides]
This publication includes 54 composite data products (CDPs) produced for next generation hydrogen stations, with data through the second quarter of 2022.
- 1 November 2022
- Published by Office of Scientific and Technical Information (OSTI)
Powertrain Performance and Total Cost of Ownership Analysis for Class 8 Yard Tractors and Refuse Trucks
Advanced powertrain technologies, specifically fuel cell electric powertrains, have gained attention as viable alternatives for medium- and heavy-duty (M/HD) vehicles. However, it is unclear how these alternative powertrain vehicles stack up against their diesel counterparts in terms of performance and total cost of ownership (TCO). Furthermore, there are vehicle segments within the M/HD sector that have remained unstudied for fuel cell electric applications. This analysis aims to provide a comparative scoping-level TCO and performance analysis for two heavy-duty vocation vehicles (Class 8 U.S. port-side yard tractor and Class 8 U.S.-based refuse truck) for both conventional diesel and heavy-duty fuel cell electric (HDFC) powertrains. The refuse truck analysis also considered compressed natural gas powertrains (CNG) for comparison. The analysis includes seven timeframes (2020, 2025, 2030, 2035, 2040, 2045, and 2050) for comparison. This simplified TCO analysis includes only direct costs (fuel price, glider purchase price, and operating & maintenance costs) and excludes any associated indirect cost (e.g., dwell time costs and other opportunity based costs). Representative drive cycles for each vehicle were based on on-board GPS logged data and chosen by the analysis team to represent average, non-extreme driving conditions. At the time the analysis was performed, the Inflation Reduction Actmore » was not in effect and therefore any potential subsidies and future cost reductions enacted under the Inflation Reduction Act were not included. Based on the operational setpoints used in this analysis, HDFC powertrains for both yard tractors and refuse trucks have the potential to achieve TCO advantages over conventional diesel powertrains (and CNG for refuse truck applications) in the near- to mid-term future while meeting the necessary duty cycle performance requirements. Yard tractors and refuse trucks spend a significant amount of time operating at low speeds, with long durations of idling, and experience numerous start/stop occurrences. These operational characteristics favor fuel cell performance as fuel cells operate with higher efficiencies at lower percentages of total power output. Conversely, conventional diesel and CNG engines are most efficient at higher percentages of total power output. This helps HDFC powered yard tractors and refuse trucks realize improved fuel economy when compared to their diesel counterparts, which helps reduce total fuel costs and therefore, total TCO. The analysis demonstrates that fuel prices play a significant role in determining TCO for each vehicle and should remain an R&D focus area. Overall, under the analysis' specified conditions, HDFC yard tractors have the potential to achieve cost parity with diesel yard tractors as early as 2025. For refuse trucks, HDFC refuse trucks have the potential to achieve cost parity with diesel and CNG refuse trucks in 2030 and 2040, respectively. « less
- 1 November 2022
- Published by Office of Scientific and Technical Information (OSTI)
Powertrain Performance and Total Cost of Ownership Analysis for Class 8 Yard Tractors and Refuse Trucks
Advanced powertrain technologies, specifically fuel cell electric powertrains, have gained attention as viable alternatives for medium- and heavy-duty (M/HD) vehicles. However, it is unclear how these alternative powertrain vehicles stack up against their diesel counterparts in terms of performance and total cost of ownership (TCO). Furthermore, there are vehicle segments within the M/HD sector that have remained unstudied for fuel cell electric applications. This analysis aims to provide a comparative scoping-level TCO and performance analysis for two heavy-duty vocation vehicles (Class 8 U.S. port-side yard tractor and Class 8 U.S.-based refuse truck) for both conventional diesel and heavy-duty fuel cell electric (HDFC) powertrains. The refuse truck analysis also considered compressed natural gas powertrains (CNG) for comparison. The analysis includes seven timeframes (2020, 2025, 2030, 2035, 2040, 2045, and 2050) for comparison. This simplified TCO analysis includes only direct costs (fuel price, glider purchase price, and operating & maintenance costs) and excludes any associated indirect cost (e.g., dwell time costs and other opportunity based costs). Representative drive cycles for each vehicle were based on on-board GPS logged data and chosen by the analysis team to represent average, non-extreme driving conditions. At the time the analysis was performed, the Inflation Reduction Actmore » was not in effect and therefore any potential subsidies and future cost reductions enacted under the Inflation Reduction Act were not included. Based on the operational setpoints used in this analysis, HDFC powertrains for both yard tractors and refuse trucks have the potential to achieve TCO advantages over conventional diesel powertrains (and CNG for refuse truck applications) in the near- to mid-term future while meeting the necessary duty cycle performance requirements. Yard tractors and refuse trucks spend a significant amount of time operating at low speeds, with long durations of idling, and experience numerous start/stop occurrences. These operational characteristics favor fuel cell performance as fuel cells operate with higher efficiencies at lower percentages of total power output. Conversely, conventional diesel and CNG engines are most efficient at higher percentages of total power output. This helps HDFC powered yard tractors and refuse trucks realize improved fuel economy when compared to their diesel counterparts, which helps reduce total fuel costs and therefore, total TCO. The analysis demonstrates that fuel prices play a significant role in determining TCO for each vehicle and should remain an R&D focus area. Overall, under the analysis' specified conditions, HDFC yard tractors have the potential to achieve cost parity with diesel yard tractors as early as 2025. For refuse trucks, HDFC refuse trucks have the potential to achieve cost parity with diesel and CNG refuse trucks in 2030 and 2040, respectively. « less
- 20 May 2022
- Published by Office of Scientific and Technical Information (OSTI)
Next Generation Hydrogen Station Composite Data Products: Retail Stations (Summer 2021: Data Through Quarter 2 of 2021) [Slides]
This publication includes 91 composite data products (CDPs) produced for next generation hydrogen stations, with data through the second quarter of 2021.
- 20 May 2022
- Published by Office of Scientific and Technical Information (OSTI)
Next Generation Hydrogen Station Composite Data Products: Retail Stations (Summer 2021: Data Through Quarter 2 of 2021) [Slides]
This publication includes 91 composite data products (CDPs) produced for next generation hydrogen stations, with data through the second quarter of 2021.
- 7 December 2021
- Published by Office of Scientific and Technical Information (OSTI)
Next Generation Hydrogen Station Composite Data Products: Retail Stations (Winter 2020: Data through Quarter 4 of 2020) [Slides]
This publication includes over 100 composite data products (CDPs) produced for next generation hydrogen stations, with data through the fourth quarter of 2020.
- 7 December 2021
- Published by Office of Scientific and Technical Information (OSTI)
Next Generation Hydrogen Station Composite Data Products: Retail Stations (Winter 2020: Data through Quarter 4 of 2020) [Slides]
This publication includes over 100 composite data products (CDPs) produced for next generation hydrogen stations, with data through the fourth quarter of 2020.
- 1 February 2021
- Published by Office of Scientific and Technical Information (OSTI)
Next Generation Hydrogen Station Composite Data Products: Retail Stations; Summer 2020 (Q2 FY2020)
This publication includes 102 composite data products (CDPs) produced for next generation hydrogen stations, with data through the second quarter of 2020. These CDPs include data from retail stations only and represent the following analysis categories: deployment, safety, maintenance and reliability, performance, cost, utilization, hydrogen quality, and component energy.
- 1 February 2021
- Published by Office of Scientific and Technical Information (OSTI)
Next Generation Hydrogen Station Composite Data Products: Retail Stations; Summer 2020 (Q2 FY2020)
This publication includes 102 composite data products (CDPs) produced for next generation hydrogen stations, with data through the second quarter of 2020. These CDPs include data from retail stations only and represent the following analysis categories: deployment, safety, maintenance and reliability, performance, cost, utilization, hydrogen quality, and component energy.
- 21 April 2020
- Published by Office of Scientific and Technical Information (OSTI)
Next Generation Hydrogen Station Composite Data Products: Retail Stations (Data through Quarter 3 of 2019)
This publication includes 98 composite data products (CDPs) produced for next generation hydrogen stations, with data through the third quarter of 2019. These CDPs include data from retail stations only and represent the following analysis categories: deployment, safety, maintenance and reliability, performance, cost, utilization, hydrogen quality, and component energy.
- 21 April 2020
- Published by Office of Scientific and Technical Information (OSTI)
Next Generation Hydrogen Station Composite Data Products: Retail Stations (Data through Quarter 3 of 2019)
This publication includes 98 composite data products (CDPs) produced for next generation hydrogen stations, with data through the third quarter of 2019. These CDPs include data from retail stations only and represent the following analysis categories: deployment, safety, maintenance and reliability, performance, cost, utilization, hydrogen quality, and component energy.
- 29 April 2019
- Published by Office of Scientific and Technical Information (OSTI)
Next Generation Hydrogen Station Composite Data Products: Retail Stations, Data through Quarter 4 of 2018
This publication includes 93 composite data products (CDPs) produced for next generation hydrogen stations, with data through the fourth quarter of 2018. These CDPs include data from retail stations only.
- 29 April 2019
- Published by Office of Scientific and Technical Information (OSTI)
Next Generation Hydrogen Station Composite Data Products: Retail Stations, Data through Quarter 4 of 2018
This publication includes 93 composite data products (CDPs) produced for next generation hydrogen stations, with data through the fourth quarter of 2018. These CDPs include data from retail stations only.