Sharifah Fathiyah Sy Mohamad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sharifah Fathiyah Sy Mohamad has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Shahril Mohamad
Faculty of Chemical and Process Engineering Technology, College of Engineering Technology, Universiti Malaysia Pahang, Kuantan, Pahang, Malaysia
4 shared publications - Abdul Munaim Mimi Sakinah
Faculty of Chemical and Process Engineering Technology, Universiti Malaysia Pahang, Gambang, Malaysia
2 shared publications - Farhan Mohd Said
Universiti Malaysia Pahang Al-Sultan Abdullah
2 shared publications - Wan Mohd Azizi Bin Wan Sulaiman
Department of Pharmaceutical Technology, Faculty of Pharmacy, University College MAIWP International, 68100 Kuala Lumpur, Malaysia
2 shared publications - Azila Abdul-Aziz
Department of Chemical and Environmental Engineering, Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra, Kuala Lumpur 54100, Malaysia
1 shared publication F M Said
Faculty of Chemical & Process Engineering Technology, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26300 Kuantan, Pahang, Malaysia
1 shared publication
Latest Publications
- Open Access
- 2 April 2023
- Published by College of Graduate Studies, Walailak University in Trends in Sciences
- Vol. 20 (8) , 4919
Development and Characterization of Bio-Composite Films Made from Bacterial Cellulose Derived from Oil Palm Frond Juice Fermentation, Chitosan and Glycerol
This study reported for the first time, the combined effects of chitosan and glycerol addition on the properties of bacterial cellulose (BC) based films for food packaging applications. Films were prepared by solution casting method using BC derived from oil palm frond juice as the main material combined with different concentrations of chitosan (0.5 and 1 %w/v) and glycerol (0.5, 1.5 and 2.5 %v/v). Pure BC, chitosan-free and glycerol-free films were used as control. The effect of incorporating chitosan and glycerol on bacterial cellulose (BC) based films was evaluated based on the physical properties (thickness, moisture content, solubility), mechanical properties (tensile strength, modulus Young, elongation at break) and chemical structure by FTIR. Increased concentration of chitosan and glycerol affected the physical and mechanical properties. The combination of 1 %w/v chitosan and 0.5 %v/v glycerol had a strengthening effect on the BC-based films with maximum tensile strength of 15 MPa and Young’s modulus of 772 MPa. Meanwhile, BC films incorporated with 1 %w/v chitosan and 2.5 %v/v glycerol demonstrated high plasticizing effect of 7 % elongation at break. The acquired FTIR spectrum of the bio-composite films suggested intermolecular interactions between BC, chitosan, and glycerol. Therefore, the BC-based bio-composite films incorporated with chitosan and glycerol have the potential to be used as food packaging materials. HIGHLIGHTS Bio-composite films from bacterial cellulose derived from oil palm frond juice fermentation with different proportions of chitosan (0.5 and 1 % w/v) and glycerol (0.5, 1.5 and 2.5 % v/v) were developed using casting method Chitosan and glycerol contents have great influences on thickness, moisture content, water solubility and mechanical properties of the films The bio-composite films have potential application as food packaging material GRAPHICAL ABSTRACT
- 2 April 2023
- Published by College of Graduate Studies, Walailak University in Trends in Sciences
- Vol. 20 (8) , 4919
Open AccessDevelopment and Characterization of Bio-Composite Films Made from Bacterial Cellulose Derived from Oil Palm Frond Juice Fermentation, Chitosan and Glycerol
This study reported for the first time, the combined effects of chitosan and glycerol addition on the properties of bacterial cellulose (BC) based films for food packaging applications. Films were prepared by solution casting method using BC derived from oil palm frond juice as the main material combined with different concentrations of chitosan (0.5 and 1 %w/v) and glycerol (0.5, 1.5 and 2.5 %v/v). Pure BC, chitosan-free and glycerol-free films were used as control. The effect of incorporating chitosan and glycerol on bacterial cellulose (BC) based films was evaluated based on the physical properties (thickness, moisture content, solubility), mechanical properties (tensile strength, modulus Young, elongation at break) and chemical structure by FTIR. Increased concentration of chitosan and glycerol affected the physical and mechanical properties. The combination of 1 %w/v chitosan and 0.5 %v/v glycerol had a strengthening effect on the BC-based films with maximum tensile strength of 15 MPa and Young’s modulus of 772 MPa. Meanwhile, BC films incorporated with 1 %w/v chitosan and 2.5 %v/v glycerol demonstrated high plasticizing effect of 7 % elongation at break. The acquired FTIR spectrum of the bio-composite films suggested intermolecular interactions between BC, chitosan, and glycerol. Therefore, the BC-based bio-composite films incorporated with chitosan and glycerol have the potential to be used as food packaging materials. HIGHLIGHTS Bio-composite films from bacterial cellulose derived from oil palm frond juice fermentation with different proportions of chitosan (0.5 and 1 % w/v) and glycerol (0.5, 1.5 and 2.5 % v/v) were developed using casting method Chitosan and glycerol contents have great influences on thickness, moisture content, water solubility and mechanical properties of the films The bio-composite films have potential application as food packaging material GRAPHICAL ABSTRACT
- 9 November 2022
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 19 (17) , 16005-16016
Production and Characterization of Bacterial Cellulose Nanofiber by Acetobacter Xylinum 0416 Using Only Oil Palm Frond Juice as Fermentation Medium
Renewable fermentation feedstock from a freshly cut oil palm frond (OPF) is a promising medium for bacterial cellulose (BC) production. Herein, this study assessed its suitability as a solitary medium for the production of BC using Acetobacter xylinum 0416 in a static culture. The proximate composition and components analysis revealed up to 36.2 g/L of fermentable sugars and vital nutrients were available in OPF juice. Meanwhile, the effect of OPF juice concentration and initial pH arrangement shows that the maximum yield of BC (2.33 g/L) was obtained using 60% v/v of OPF juice concentration at initial pH 3.5 and incubated at 30℃ for 14 days. Besides, pure OPF juice showed a minimum in BC production due to the presence of inhibitory component suspected to be the lignin content. The kinetic study was elucidated for BC produced from OPF juice and compared with coconut water medium. The FT-IR and XRD spectra, and FE-SEM micrograph analysis for the BC showed the typical peaks represent in cellulose with a crystallinity index of 82.4% and threadlike microfibrils structure ranging from 35.6.5 nm to 77.5 nm. Thus, OPF juice is a solely sufficient medium that offers a positive alternative to BC production.
- 9 November 2022
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 19 (17) , 16005-16016
Production and Characterization of Bacterial Cellulose Nanofiber by Acetobacter Xylinum 0416 Using Only Oil Palm Frond Juice as Fermentation Medium
Renewable fermentation feedstock from a freshly cut oil palm frond (OPF) is a promising medium for bacterial cellulose (BC) production. Herein, this study assessed its suitability as a solitary medium for the production of BC using Acetobacter xylinum 0416 in a static culture. The proximate composition and components analysis revealed up to 36.2 g/L of fermentable sugars and vital nutrients were available in OPF juice. Meanwhile, the effect of OPF juice concentration and initial pH arrangement shows that the maximum yield of BC (2.33 g/L) was obtained using 60% v/v of OPF juice concentration at initial pH 3.5 and incubated at 30℃ for 14 days. Besides, pure OPF juice showed a minimum in BC production due to the presence of inhibitory component suspected to be the lignin content. The kinetic study was elucidated for BC produced from OPF juice and compared with coconut water medium. The FT-IR and XRD spectra, and FE-SEM micrograph analysis for the BC showed the typical peaks represent in cellulose with a crystallinity index of 82.4% and threadlike microfibrils structure ranging from 35.6.5 nm to 77.5 nm. Thus, OPF juice is a solely sufficient medium that offers a positive alternative to BC production.
- 13 January 2020
- Published by Taylor & Francis in Critical Reviews in Biotechnology
- Vol. 40 (3) , 341-356
Application of experimental designs and response surface methods in screening and optimization of reverse micellar extraction
Reverse micellar extraction (RME) has emerged as a versatile and efficient tool for downstream processing (DSP) of various biomolecules, including structural proteins and enzymes, due to the substantial advantages over conventional DSP methods. However, the RME system is a complex dependency of several parameters that influences the overall selectivity and performance of the RME system, hence this justifies the need for optimization to obtain higher possible extraction results. For the last two decades, many experimental design strategies for screening and optimization of RME have been described in literature. The objective of this article is to review the use of different experimental designs and response surface methodologies that are currently used to screen and optimize the RME system for various types of biomolecules. Overall, this review provides the rationale for the selection of appropriate screening or optimization techniques for the parameters associated with both forward and backward extraction during the RME of biomolecules.
- 13 January 2020
- Published by Taylor & Francis in Critical Reviews in Biotechnology
- Vol. 40 (3) , 341-356
Application of experimental designs and response surface methods in screening and optimization of reverse micellar extraction
Reverse micellar extraction (RME) has emerged as a versatile and efficient tool for downstream processing (DSP) of various biomolecules, including structural proteins and enzymes, due to the substantial advantages over conventional DSP methods. However, the RME system is a complex dependency of several parameters that influences the overall selectivity and performance of the RME system, hence this justifies the need for optimization to obtain higher possible extraction results. For the last two decades, many experimental design strategies for screening and optimization of RME have been described in literature. The objective of this article is to review the use of different experimental designs and response surface methodologies that are currently used to screen and optimize the RME system for various types of biomolecules. Overall, this review provides the rationale for the selection of appropriate screening or optimization techniques for the parameters associated with both forward and backward extraction during the RME of biomolecules.
- Open Access
- 1 January 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 716 (1) , 012019
Response surface optimization of the forward extraction of jacalin from jackfruit seeds using AOT/isooctane reverse micellar system
Jacalin is the major protein contained in the crude extract of jackfruit (Artocarpus heterophyllus) seed that specifically recognizes and binds reversibly to galactose. Conventionally, purification of jacalin is carried out using the tedious and costly chromatographic techniques. In this study, extraction of jacalin from jackfruit seed crude extract were done using the sodium bis(2-ethylhexyl) sulfosuccinate (AOT)-based reverse micellar system. Reverse micellar extraction is an attractive alternative for downstream processing of various proteins. A successful reverse micellar extraction consists of two basic steps: forward and backward extraction. Forward extraction transfers a target protein from an aqueous solution into the reverse micellar solution, while backward extraction releases the protein from the reverse micelles structure into a new aqueous solution. The effects of the aqueous phase pH, NaCl concentration and AOT concentration on the forward extraction efficiency (FEE) are investigated using the response surface methodology (Box-Behnken Design). The main effects and interactions of the parameters are analyzed through the 3D surface plots. The optimum conditions for forward extraction were determined as follows: aqueous phase pH 4.58, 125 mM NaCl and 40 mM AOT. Under the optimal conditions, the FEE reached 88.04±1.30%, closer to 87.99% predicted by the model. The results indicated that AOT/isooctane reverse micelle system is effective in extracting jacalin from the jackfruit seed crude extract and verified the practicability of the BBD model for optimizing the main parameters in the forward extraction of jacalin.
- 1 January 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 716 (1) , 012019
Open AccessResponse surface optimization of the forward extraction of jacalin from jackfruit seeds using AOT/isooctane reverse micellar system
Jacalin is the major protein contained in the crude extract of jackfruit (Artocarpus heterophyllus) seed that specifically recognizes and binds reversibly to galactose. Conventionally, purification of jacalin is carried out using the tedious and costly chromatographic techniques. In this study, extraction of jacalin from jackfruit seed crude extract were done using the sodium bis(2-ethylhexyl) sulfosuccinate (AOT)-based reverse micellar system. Reverse micellar extraction is an attractive alternative for downstream processing of various proteins. A successful reverse micellar extraction consists of two basic steps: forward and backward extraction. Forward extraction transfers a target protein from an aqueous solution into the reverse micellar solution, while backward extraction releases the protein from the reverse micelles structure into a new aqueous solution. The effects of the aqueous phase pH, NaCl concentration and AOT concentration on the forward extraction efficiency (FEE) are investigated using the response surface methodology (Box-Behnken Design). The main effects and interactions of the parameters are analyzed through the 3D surface plots. The optimum conditions for forward extraction were determined as follows: aqueous phase pH 4.58, 125 mM NaCl and 40 mM AOT. Under the optimal conditions, the FEE reached 88.04±1.30%, closer to 87.99% predicted by the model. The results indicated that AOT/isooctane reverse micelle system is effective in extracting jacalin from the jackfruit seed crude extract and verified the practicability of the BBD model for optimizing the main parameters in the forward extraction of jacalin.
- Open Access
- 29 May 2019
- Published by Universitas Gadjah Mada in Indonesian Journal of Chemistry
- Vol. 19 (3) , 737-746
Effect of Key Parameters on Jacalin Extraction from Aqueous Phase into Anionic Reverse Micelles
This study demonstrates the extraction of jacalin from crude extract of jackfruit seeds using anionic surfactant based reverse micellar system, sodium bis(2-ethylhexyl) sulfosuccinate (AOT) in isooctane. Effects of various parameters, such as, NaCl concentration (0.05 – 1 M), pH of aqueous phase (pH 4 – 10), AOT concentration (5 – 150 mM), contact time (5 – 30 min) and phase volume ratio (0.5-5) on the transfer efficiency of jacalin was evaluated by changing one factor at a time (OFAT) while keeping the other parameters constant. A maximum of 83% of protein transfer was achieved after equal volume of organic and aqueous phase was stirred for 20 min using 20 mM AOT at pH 5 aqueous phase containing 0.1 M NaCl. The findings demonstrated AOT reverse micellar system as a promising and effective method to extract and purify jacalin from crude protein mixture.
- 29 May 2019
- Published by Universitas Gadjah Mada in Indonesian Journal of Chemistry
- Vol. 19 (3) , 737-746
Open AccessEffect of Key Parameters on Jacalin Extraction from Aqueous Phase into Anionic Reverse Micelles
This study demonstrates the extraction of jacalin from crude extract of jackfruit seeds using anionic surfactant based reverse micellar system, sodium bis(2-ethylhexyl) sulfosuccinate (AOT) in isooctane. Effects of various parameters, such as, NaCl concentration (0.05 – 1 M), pH of aqueous phase (pH 4 – 10), AOT concentration (5 – 150 mM), contact time (5 – 30 min) and phase volume ratio (0.5-5) on the transfer efficiency of jacalin was evaluated by changing one factor at a time (OFAT) while keeping the other parameters constant. A maximum of 83% of protein transfer was achieved after equal volume of organic and aqueous phase was stirred for 20 min using 20 mM AOT at pH 5 aqueous phase containing 0.1 M NaCl. The findings demonstrated AOT reverse micellar system as a promising and effective method to extract and purify jacalin from crude protein mixture.
- 1 January 2019
- Published by Elsevier in Materials Today: Proceedings
- Vol. 19, 1638-1646
Fractional Factorial Analysis for Identifying Significant Factors in Extraction of Jacalin From Jackfruit Seeds Using Anionic Reverse Micellar System
- 1 January 2019
- Published by Elsevier in Materials Today: Proceedings
- Vol. 19, 1638-1646
Fractional Factorial Analysis for Identifying Significant Factors in Extraction of Jacalin From Jackfruit Seeds Using Anionic Reverse Micellar System
- Open Access
- 1 January 2013
- Published by Elsevier in Procedia Engineering
- Vol. 53, 20-28
The Susceptibility of Aphids, Aphis gossypii Glover to Lauric Acid based Natural Pesticide
- 1 January 2013
- Published by Elsevier in Procedia Engineering
- Vol. 53, 20-28
Open AccessThe Susceptibility of Aphids, Aphis gossypii Glover to Lauric Acid based Natural Pesticide