Ying Xin

Natural fractures and artificial fractures in a tight rock matrix of an enhanced geothermal system make flow and heat transfer become seriously anisotropic. In this paper, a field-scale fractured heterogeneous geothermal reservoir model is built to study the heat transfer process. Based on an equivalent continuum method and local thermal non-equilibrium model, an equivalent permeability tensor is mapped from discrete fractures and a coupled thermal-hydraulic-mechanical mathematical model is adopted in which logarithmic stress sensitivity model is used to couple effective stress and permeability. From numerical simulation results at different injection rates, the contour results show the heterogeneity of flow, heat transfer and stress sensitivity are dominated by fractures distribution. Temperature contours reveal that the heat convection between water and rock in a fracture is more intense than the heat conduction between rock under different temperatures. The predicted power generation of a geothermal plant reveals the adverse effect on heat conversion efficiency, which is caused by the temperature drop at high injection rates.

The Enhanced Geothermal System (EGS) constructs an artificial thermal reservoir by hydraulic fracturing to extract heat economically from hot dry rock. As the core element of the EGS heat recovery process, mass and heat transfer of working fluid mainly occurs in fractures. Since the direction of the natural and induced fractures are generally perpendicular to the minimum principal stress in the formation, as an effective stimulation approach, horizontal well production could increase the contact area with the thermal reservoir significantly. In this paper, the thermal reservoir is developed by a dual horizontal well system and treated as a fractured porous medium composed of matrix rock and discrete fracture network. Using the local thermal non-equilibrium theory, a coupled THM mathematical model and an ideal 3D numerical model are established for the EGS heat extraction process. EGS heat extraction capacity is evaluated in the light of thermal recovery lifespan, average outlet temperature, heat production, electricity generation, energy efficiency and thermal recovery rate. The results show that with certain reservoir and production parameters, the heat production, electricity generation and thermal recovery lifespan can achieve the commercial goal of the dual horizontal well system, but the energy efficiency and overall thermal recovery rate are still at low levels. At last, this paper puts forward a series of optimizations to improve the heat extraction capacity, including production conditions and thermal reservoir construction design.

Almost 98% of methane hydrate is stored in the seawater environment, the study of microscopic mechanism for methane hydrate dissociation on the sea floor is of great significance to the development of hydrate production, involving a three-phase coexistence system of seawater (3.5% NaCl) + hydrate + methane gas. The molecular dynamics method is used to simulate the hydrate dissociation process. The dissociation of hydrate system depends on diffusion of methane molecules from partially open cages and a layer by layer breakdown of the closed cages. The presence of liquid or gas phases adjacent to the hydrate has an effect on the rate of hydrate dissociation. At the beginning of dissociation process, hydrate layers that are in contact with liquid phase dissociated faster than layers adjacent to the gas phase. As the dissociation continues, the thickness of water film near the hydrate-liquid interface became larger than the hydrate-gas interface giving more resistance to the hydrate dissociation. Dissociation rate of hydrate layers adjacent to gas phase gradually exceeds the dissociation rate of layers adjacent to the liquid phase. The difficulty of methane diffusion in the hydrate-liquid side also brings about change in dissociation rate.