Himadri Raha
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Himadri Raha has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Prasanta Kumar Guha
Indian Institute of Technology Kharagpur
4 shared publications - Bibhas Manna
Department of Electronics and Electrical Communication Engineering, IIT Kharagpur, Kharagpur 721302, India
2 shared publications Debabrata Pradhan
2 shared publicationsBibhas Manna
Department of Electronics and Electrical Communication Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302, India
1 shared publication- Debabrata Pradhan
Materials Science Centre, Indian Institute of Technology Kharagpur, Kharagpur 721302, India
1 shared publication Debasree Burman
Department of Electrical Engineering, Indian Institute of Technology, Bombay 400076, India
1 shared publication
Latest Publications
- 25 January 2023
- Published by Elsevier in Journal of Electroanalytical Chemistry
- Vol. 931
Ultrahigh coulombic efficiency in alkali metal incorporated biomass derived carbon electrode
- 25 January 2023
- Published by Elsevier in Journal of Electroanalytical Chemistry
- Vol. 931
Ultrahigh coulombic efficiency in alkali metal incorporated biomass derived carbon electrode
- 1 April 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 33 (25) , 255402
Structurally modified V 2 O 5 based extrinsic pseudocapacitor
Rapidly changing demand on energy storage systems makes it essential to redesign the device architecture and materials required to fabricate the devices. It is crucial to introduce capacitive behaviour in a conventional energy storage device (batteries) to improve the lifetime and power efficiency of the hole energy storage system. The charge storing nature of electrode material primarily depends on particle size, grain size, the electrode’s chemical structure, and effective diffusion lengths for electrolytes within the electrode. Here V 2 O 5 based Li-ion battery electrode is transformed into a Li-ion pseudocapacitive electrode by structural modifications. The modified structures are achieved by optimizing reaction pressure to obtain larger, medium and smaller V 2 O 5 particles (namely, V 2 O 5 -L, V 2 O 5 -M and V 2 O 5 -S). As a result, the plateau regions in galvanostatic charge–discharge plots and highly intense redox peaks in the CV plots of V 2 O 5 -L get flattened for V 2 O 5 -S. Also, the lucrative improvement in rate capabilities and stability for V 2 O 5 -S indicates induced pseudocapacitance in V 2 O 5 . Some devices are fabricated with the extrinsic pseudocapacitive material (V 2 O 5 -S), providing 4.36 mWh cm −3 volumetric energy density with 125 mW cm −3 volumetric power density. The device retains around 95% of its initial capacitance after 10k cycles and holds up to 63% after 25k stability cycles.
- 1 April 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 33 (25) , 255402
Structurally modified V 2 O 5 based extrinsic pseudocapacitor
Rapidly changing demand on energy storage systems makes it essential to redesign the device architecture and materials required to fabricate the devices. It is crucial to introduce capacitive behaviour in a conventional energy storage device (batteries) to improve the lifetime and power efficiency of the hole energy storage system. The charge storing nature of electrode material primarily depends on particle size, grain size, the electrode’s chemical structure, and effective diffusion lengths for electrolytes within the electrode. Here V 2 O 5 based Li-ion battery electrode is transformed into a Li-ion pseudocapacitive electrode by structural modifications. The modified structures are achieved by optimizing reaction pressure to obtain larger, medium and smaller V 2 O 5 particles (namely, V 2 O 5 -L, V 2 O 5 -M and V 2 O 5 -S). As a result, the plateau regions in galvanostatic charge–discharge plots and highly intense redox peaks in the CV plots of V 2 O 5 -L get flattened for V 2 O 5 -S. Also, the lucrative improvement in rate capabilities and stability for V 2 O 5 -S indicates induced pseudocapacitance in V 2 O 5 . Some devices are fabricated with the extrinsic pseudocapacitive material (V 2 O 5 -S), providing 4.36 mWh cm −3 volumetric energy density with 125 mW cm −3 volumetric power density. The device retains around 95% of its initial capacitance after 10k cycles and holds up to 63% after 25k stability cycles.
- 8 September 2021
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 6 (9) , 3398-3408
Substitutional Doping of MoS2 for Superior Gas-Sensing Applications: A Proof of Concept
Two-dimensional layered materials (like MoS2 and WS2) those are being used as sensing layers in chemoresistive gas sensors suffer from poor sensitivity and selectivity. Mere surface functionalization (decorating of material surface) with metal nanoparticles (NPs) might not improve the sensor performance significantly. In this respect, doping of the layered material can play a significant role. Here, we report a simple yet effective substitutional doping technique to dope MoS2 with noble metals. Through various material characterization techniques like X-ray diffraction, scanning tunneling spectroscopy images, and selected area electron diffraction pattern, we were able to put forward the difference between surface decoration and substitutional doping by Au at S-vacancy sites of MoS2. Lattice strain was found to exist in the Au-doped MoS2 samples, while being absent in the Au NP-decorated samples. Surface chemistry studies performed using X-ray photoelectron spectroscopy showed a shift of Mo 3d peaks to lower binding energies, thus realizing p-type doping due to Au. The blue shift of the peaks as observed in Raman spectroscopy further confirmed the p-type doping. We found that gold-doped MoS2 was more sensitive and selective toward ammonia (with a response of 150% for 500 ppm of ammonia at 90 °C) as compared to gold NP-decorated MoS2. The advantages of substitutional doping and the gas-sensing mechanism were also explained by the density functional theory study. From the first principles study, it was found that the adsorption of Au atoms on the S-vacancy site of a monolayer of the MoS2 sheet was thermodynamically favorable with the adsorption energy of 2.39 eV. We also successfully doped MoS2 with Pt using the same technique. It was found that Pt-doped MoS2 gives huge response toward humidity (60,000% at 80% relative humidity). Thus, various noble metal doping of MoS2 selectively improved the sensing response toward specific analytes. From this work, we believe that this method could also be useful to dope other layered nanomaterials to design gas sensors with improved selectivity.
- 8 September 2021
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 6 (9) , 3398-3408
Substitutional Doping of MoS2 for Superior Gas-Sensing Applications: A Proof of Concept
Two-dimensional layered materials (like MoS2 and WS2) those are being used as sensing layers in chemoresistive gas sensors suffer from poor sensitivity and selectivity. Mere surface functionalization (decorating of material surface) with metal nanoparticles (NPs) might not improve the sensor performance significantly. In this respect, doping of the layered material can play a significant role. Here, we report a simple yet effective substitutional doping technique to dope MoS2 with noble metals. Through various material characterization techniques like X-ray diffraction, scanning tunneling spectroscopy images, and selected area electron diffraction pattern, we were able to put forward the difference between surface decoration and substitutional doping by Au at S-vacancy sites of MoS2. Lattice strain was found to exist in the Au-doped MoS2 samples, while being absent in the Au NP-decorated samples. Surface chemistry studies performed using X-ray photoelectron spectroscopy showed a shift of Mo 3d peaks to lower binding energies, thus realizing p-type doping due to Au. The blue shift of the peaks as observed in Raman spectroscopy further confirmed the p-type doping. We found that gold-doped MoS2 was more sensitive and selective toward ammonia (with a response of 150% for 500 ppm of ammonia at 90 °C) as compared to gold NP-decorated MoS2. The advantages of substitutional doping and the gas-sensing mechanism were also explained by the density functional theory study. From the first principles study, it was found that the adsorption of Au atoms on the S-vacancy site of a monolayer of the MoS2 sheet was thermodynamically favorable with the adsorption energy of 2.39 eV. We also successfully doped MoS2 with Pt using the same technique. It was found that Pt-doped MoS2 gives huge response toward humidity (60,000% at 80% relative humidity). Thus, various noble metal doping of MoS2 selectively improved the sensing response toward specific analytes. From this work, we believe that this method could also be useful to dope other layered nanomaterials to design gas sensors with improved selectivity.
- 12 August 2019
- Published by IOP Publishing in Nanotechnology
- Vol. 30 (43) , 435404
Quantum capacitance tuned flexible supercapacitor by UV-ozone treated defect engineered reduced graphene oxide forest
A forest like 3D carbon structure formed by reduced graphene oxide (RGO) was prepared to use as an electrode material for a highly power efficient supercapacitor. To improve the specific energy of the electrode, pore like defects were incorporated on the RGO forests by atomic oxygen etching, during the UV-ozone treatment. The modified surface helps to increase the net capacitance by permitting the electrolyte to the inner core of the active material and improving the minimal quantum capacitance. Density functional theory based first principle studies were carried out to find DOS at the Fermi level of defect induced RGO sheet and hence to validate the effect of quantum capacitance on net capacitance. Specific capacitance of RGO forest was increased by almost 150% after introduction of the defects. The best performing material exhibits 18.87 mF cm −2 areal capacitance at 2 mA cm −2 current density which is equivalent to 70 F cm −3 at 3.7 A cm −3 current density, and it was used to fabricate the supercapacitor. Two supercapacitors were fabricated, (i) on graphite sheet (non-flexible) and (ii) on scotch tape (flexible). Here PVA-KOH gel soaked filter paper was used as electrolyte-separator. Both the prepared supercapacitors on graphite sheet and scotch tape are able to transfer electrical energy with ultra high specific power (656.25 mW cm −3 and 164.06 mW cm −3 respectively) while maintaining moderate energy densities. The first device can withstand its primary capacitance by 90% even after 10 K charge–discharge cycles and the flexible device was able to hold 96% of its capacitance after 1 K bending cycles.
- 12 August 2019
- Published by IOP Publishing in Nanotechnology
- Vol. 30 (43) , 435404
Quantum capacitance tuned flexible supercapacitor by UV-ozone treated defect engineered reduced graphene oxide forest
A forest like 3D carbon structure formed by reduced graphene oxide (RGO) was prepared to use as an electrode material for a highly power efficient supercapacitor. To improve the specific energy of the electrode, pore like defects were incorporated on the RGO forests by atomic oxygen etching, during the UV-ozone treatment. The modified surface helps to increase the net capacitance by permitting the electrolyte to the inner core of the active material and improving the minimal quantum capacitance. Density functional theory based first principle studies were carried out to find DOS at the Fermi level of defect induced RGO sheet and hence to validate the effect of quantum capacitance on net capacitance. Specific capacitance of RGO forest was increased by almost 150% after introduction of the defects. The best performing material exhibits 18.87 mF cm −2 areal capacitance at 2 mA cm −2 current density which is equivalent to 70 F cm −3 at 3.7 A cm −3 current density, and it was used to fabricate the supercapacitor. Two supercapacitors were fabricated, (i) on graphite sheet (non-flexible) and (ii) on scotch tape (flexible). Here PVA-KOH gel soaked filter paper was used as electrolyte-separator. Both the prepared supercapacitors on graphite sheet and scotch tape are able to transfer electrical energy with ultra high specific power (656.25 mW cm −3 and 164.06 mW cm −3 respectively) while maintaining moderate energy densities. The first device can withstand its primary capacitance by 90% even after 10 K charge–discharge cycles and the flexible device was able to hold 96% of its capacitance after 1 K bending cycles.
- 12 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 65 (00189383) , 1-8
Selective Reduction of Oxygen Functional Groups to Improve the Response Characteristics of Graphene Oxide-Based Formaldehyde Sensor Device: A First Principle Study
This paper presents a density functional theory-based first principle study to investigate the atomic-scale interactions of formaldehyde (H 2 CO) molecules with different oxygen containing functional groups of graphene oxide to identify which particular functional group possesses better adsorption capability toward H 2 CO molecule. The detailed study on formaldehyde adsorption has been conducted in terms of changes in structural, energetic, electronic, and transport properties of graphene oxides modeled with sp 3 hybridized hydroxyl (-OH) and epoxy (C-O-C) groups on the carbon basal plane. Our computational results suggest that the graphene oxidized with only -OH group shows the highest affinity toward formaldehyde as compared with epoxy oxidized graphene and graphene oxide containing both the functional groups. The influence of vacancy defect on improving the sensing response of graphene oxide has also been studied. The results of current–voltage ( ${I}$ – ${V}$ ) characteristics reveal that graphene oxidized with only hydroxyl group can achieve an improvement in sensitivity by almost two times and five times as compared with graphene oxide containing both the functional groups and the pristine graphene sheet, respectively. Moreover, the selectivity test for some common indoor air pollutants was also carried out and the test results suggest that H 2 CO molecule is highly selective toward the -OH group of graphene oxide as compared with the epoxy group.
- 12 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 65 (00189383) , 1-8
Selective Reduction of Oxygen Functional Groups to Improve the Response Characteristics of Graphene Oxide-Based Formaldehyde Sensor Device: A First Principle Study
This paper presents a density functional theory-based first principle study to investigate the atomic-scale interactions of formaldehyde (H 2 CO) molecules with different oxygen containing functional groups of graphene oxide to identify which particular functional group possesses better adsorption capability toward H 2 CO molecule. The detailed study on formaldehyde adsorption has been conducted in terms of changes in structural, energetic, electronic, and transport properties of graphene oxides modeled with sp 3 hybridized hydroxyl (-OH) and epoxy (C-O-C) groups on the carbon basal plane. Our computational results suggest that the graphene oxidized with only -OH group shows the highest affinity toward formaldehyde as compared with epoxy oxidized graphene and graphene oxide containing both the functional groups. The influence of vacancy defect on improving the sensing response of graphene oxide has also been studied. The results of current–voltage ( ${I}$ – ${V}$ ) characteristics reveal that graphene oxidized with only hydroxyl group can achieve an improvement in sensitivity by almost two times and five times as compared with graphene oxide containing both the functional groups and the pristine graphene sheet, respectively. Moreover, the selectivity test for some common indoor air pollutants was also carried out and the test results suggest that H 2 CO molecule is highly selective toward the -OH group of graphene oxide as compared with the epoxy group.