Priyanka Agarwal
Priyanka Agarwal has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
B. Dhanasekar
Department of Prosthodontics and Crown and Bridge, Manipal College of Dental Sciences, Manipal, India
3 shared publicationsLokendra Gupta
Department of Prosthodontics, Manipal College of Dental Sciences, Manipal-576104, Karnataka, India
3 shared publications- Lokendra Gupta
Department of Prosthodontics and Crown and Bridge, Manipal College of Dental Sciences, Manipal, Karnataka, India
3 shared publications D. Lingeshwar
Department of Prosthodontics and Crown and Bridge, Madha Dental College and Hospital, Kunrathur, Tamilnadu, India
2 shared publicationsI.N. Aparna
Department of Prosthodontics and Crown and Bridge, Manipal College of Dental Sciences, Manipal, India
2 shared publications- Rashmi Nayak
Department of Pedodontics and Preventive Dentistry Manipal College of Dental Sciences, Manipal Academy of Higher Education, Manipal, Karnataka, India
2 shared publications
Latest Publications
- 10 August 2018
- Published by Elsevier in Materials Today: Proceedings
- Vol. 5 (8) , 16065-16072
Evaluation of properties of Glass Ionomer Cement reinforced with Zinc Oxide nanoparticles – An in vitro study
- 10 August 2018
- Published by Elsevier in Materials Today: Proceedings
- Vol. 5 (8) , 16065-16072
Evaluation of properties of Glass Ionomer Cement reinforced with Zinc Oxide nanoparticles – An in vitro study
- Open Access
- 3 April 2018
- Published by Wiley in Case Reports in Dentistry
- Vol. 2018, 1-5
A Predictable Aesthetic Rehabilitation of Deciduous Anterior Teeth in Early Childhood Caries
Aesthetic dentistry plays a significant role not only in adults but also in pediatric patients. However, a pediatric dentist is faced with the dual problem of satisfying the aesthetic expectations of the patient and parents as well as managing the pediatric patient. In the present era, there are numerous restorative techniques that can be applied to different clinical scenarios. However, we have to choose the technique that best suits our patient, not only biologically but also aesthetically, psychologically, functionally, and financially. The following paper presents the clinical sequence of rehabilitation of severely carious maxillary anterior teeth from left to right lateral incisors in a child with early childhood caries. Severely carious anterior teeth were endodontically treated. The central incisors were restored with gamma loop posts which is mainly used for pediatric patients in endodontically treated teeth. Lateral incisors were treated with Ribbond polyethylene fibre posts. Following this, all the teeth were restored aesthetically with free-hand composite buildup after proper shade selection. The occlusion was restored, and the restorations were finished and polished.
- 3 April 2018
- Published by Wiley in Case Reports in Dentistry
- Vol. 2018, 1-5
Open AccessA Predictable Aesthetic Rehabilitation of Deciduous Anterior Teeth in Early Childhood Caries
Aesthetic dentistry plays a significant role not only in adults but also in pediatric patients. However, a pediatric dentist is faced with the dual problem of satisfying the aesthetic expectations of the patient and parents as well as managing the pediatric patient. In the present era, there are numerous restorative techniques that can be applied to different clinical scenarios. However, we have to choose the technique that best suits our patient, not only biologically but also aesthetically, psychologically, functionally, and financially. The following paper presents the clinical sequence of rehabilitation of severely carious maxillary anterior teeth from left to right lateral incisors in a child with early childhood caries. Severely carious anterior teeth were endodontically treated. The central incisors were restored with gamma loop posts which is mainly used for pediatric patients in endodontically treated teeth. Lateral incisors were treated with Ribbond polyethylene fibre posts. Following this, all the teeth were restored aesthetically with free-hand composite buildup after proper shade selection. The occlusion was restored, and the restorations were finished and polished.
- 1 April 2017
- Published by Jaypee Brothers Medical Publishing in World Journal of Dentistry
- Vol. 8 (2) , 129-133
Evaluation of Antifungal Activity of Methacrylic Acid incorporated in Conventional Heat-activated Resins
Aim: The aim of this study was to evaluate the antifungal activity of heat-activated denture base resins modified with different concentrations of methacrylic acid (MAA). Materials and methods: Methyl methacrylate (MMA) monomer of heat-activated resins was modified with different concentrations of MAA (0, 15, 20, and 25%) for the preparation of specimens to evaluate antifungal activity of heat-activated resins. Prepared specimens were stored in distilled water at 37°C for 1 day and 1 week before the evaluation of microbial adhesion. Microbial adhesion of Candida albicans cells to acrylic samples was examined under light microscopy after Gram staining of all the acrylic samples. Data were subjected to one-way analysis of variance followed by post-hoc Tukey's honest significant difference test. A value of p < 0.05 was considered to be statistically significant Results: Addition of MAA to the MMA monomer was found to significantly reduce the adhesion of C. albicans for all the groups. Reduction of C. albicans cell adherence was found significant for all three groups (I, II, and III) as compared to control, both at 1 day (p < 0.001) and 1 week (p < 0.001) after storage in distilled water Conclusion: Addition of MAA to conventional denture base formulations reduced the adhesion of C. albicans. This method of incorporating antifungal property to denture base resins can effectively be used to reduce denture stomatitis in elderly and immunocompromised patients. How to cite this article: Gupta L, Aparna IN, Dhanasekar B, Bhat S, Ginjupalli K, Agarwal P. Evaluation of Antifungal Activity of Methacrylic Acid incorporated in Conventional Heat-activated Resins. World J Dent 2017;8(2):129-133.
- 1 April 2017
- Published by Jaypee Brothers Medical Publishing in World Journal of Dentistry
- Vol. 8 (2) , 129-133
Evaluation of Antifungal Activity of Methacrylic Acid incorporated in Conventional Heat-activated Resins
Aim: The aim of this study was to evaluate the antifungal activity of heat-activated denture base resins modified with different concentrations of methacrylic acid (MAA). Materials and methods: Methyl methacrylate (MMA) monomer of heat-activated resins was modified with different concentrations of MAA (0, 15, 20, and 25%) for the preparation of specimens to evaluate antifungal activity of heat-activated resins. Prepared specimens were stored in distilled water at 37°C for 1 day and 1 week before the evaluation of microbial adhesion. Microbial adhesion of Candida albicans cells to acrylic samples was examined under light microscopy after Gram staining of all the acrylic samples. Data were subjected to one-way analysis of variance followed by post-hoc Tukey's honest significant difference test. A value of p < 0.05 was considered to be statistically significant Results: Addition of MAA to the MMA monomer was found to significantly reduce the adhesion of C. albicans for all the groups. Reduction of C. albicans cell adherence was found significant for all three groups (I, II, and III) as compared to control, both at 1 day (p < 0.001) and 1 week (p < 0.001) after storage in distilled water Conclusion: Addition of MAA to conventional denture base formulations reduced the adhesion of C. albicans. This method of incorporating antifungal property to denture base resins can effectively be used to reduce denture stomatitis in elderly and immunocompromised patients. How to cite this article: Gupta L, Aparna IN, Dhanasekar B, Bhat S, Ginjupalli K, Agarwal P. Evaluation of Antifungal Activity of Methacrylic Acid incorporated in Conventional Heat-activated Resins. World J Dent 2017;8(2):129-133.
- Open Access
- 1 January 2016
- Published by Medknow in The Journal of Indian Prosthodontic Society
- Vol. 16 (4) , 405-407
Lobule separator prosthesis to prevent adhesion of reconstructed ear lobe
An adhesion is a band of scar tissue that binds two parts of the tissue together, which develops when the body's repair mechanisms respond to any tissue disturbance, such as surgery, infection, trauma, or radiation. Prevention of unwanted scar bands is of utmost importance to develop esthetic and healthy tissue. This article describes a technique to prevent the adhesion of the surgically reconstructed ear lobule with facial skin, using novel lobule separator prosthesis.
- 1 January 2016
- Published by Medknow in The Journal of Indian Prosthodontic Society
- Vol. 16 (4) , 405-407
Open AccessLobule separator prosthesis to prevent adhesion of reconstructed ear lobe
An adhesion is a band of scar tissue that binds two parts of the tissue together, which develops when the body's repair mechanisms respond to any tissue disturbance, such as surgery, infection, trauma, or radiation. Prevention of unwanted scar bands is of utmost importance to develop esthetic and healthy tissue. This article describes a technique to prevent the adhesion of the surgically reconstructed ear lobule with facial skin, using novel lobule separator prosthesis.
- 1 May 2015
- Published by SAGE Publications in The Cleft Palate Craniofacial Journal
- Vol. 52 (3) , 363-368
Functional and Aesthetic Rehabilitation of a Geriatric Patient with Cleft Palate: A Case Report
Cleft palate defect with complete edentulism in elderly patients presents a prosthodontic challenge for complete denture fabrication. Such large defects are very difficult to restore by surgical intervention and have direct consequence on such functions as mastication and speech, on aesthetics, and on the patient's mental attitude. This article describes a case report in which a 76-year-old female patient underwent restoration with a closed hollow bulb obturator for a large cleft palate defect.
- 1 May 2015
- Published by SAGE Publications in The Cleft Palate Craniofacial Journal
- Vol. 52 (3) , 363-368
Functional and Aesthetic Rehabilitation of a Geriatric Patient with Cleft Palate: A Case Report
Cleft palate defect with complete edentulism in elderly patients presents a prosthodontic challenge for complete denture fabrication. Such large defects are very difficult to restore by surgical intervention and have direct consequence on such functions as mastication and speech, on aesthetics, and on the patient's mental attitude. This article describes a case report in which a 76-year-old female patient underwent restoration with a closed hollow bulb obturator for a large cleft palate defect.
- 7 October 2013
- Published by Wiley in Journal of Prosthodontics
- Vol. 23 (3) , 252-255
Three‐Dimensional Orientation of Iris in an Ocular Prosthesis Using a Customized Scale
The success of an ocular prosthesis depends largely on the correct orientation of the iris disk. Various methods have been put forth to achieve this. This article emphasizes one such simplified method, wherein a customized scale has been used to orient the iris disk mediolaterally, superoinferiorly, and anteroposteriorly in an ocular prosthesis. A scleral wax pattern was fabricated. The customized scale was used to measure the dimension and orientation of the natural iris. These measurements were then transferred to the scleral wax pattern with the customized scale. An iris disk was fabricated using black crayon on the scleral wax pattern according to the measurements. The scleral wax pattern, including the iris disk, was then placed in the eye socket to verify its dimension and orientation. A prefabricated iris disk was modified according to the measured dimensions and transferred to the final scleral wax pattern. The transfer of these dimensions to the definitive prosthesis was achieved successfully, ultimately improving the patient's social and psychological well being.
- 7 October 2013
- Published by Wiley in Journal of Prosthodontics
- Vol. 23 (3) , 252-255
Three‐Dimensional Orientation of Iris in an Ocular Prosthesis Using a Customized Scale
The success of an ocular prosthesis depends largely on the correct orientation of the iris disk. Various methods have been put forth to achieve this. This article emphasizes one such simplified method, wherein a customized scale has been used to orient the iris disk mediolaterally, superoinferiorly, and anteroposteriorly in an ocular prosthesis. A scleral wax pattern was fabricated. The customized scale was used to measure the dimension and orientation of the natural iris. These measurements were then transferred to the scleral wax pattern with the customized scale. An iris disk was fabricated using black crayon on the scleral wax pattern according to the measurements. The scleral wax pattern, including the iris disk, was then placed in the eye socket to verify its dimension and orientation. A prefabricated iris disk was modified according to the measured dimensions and transferred to the final scleral wax pattern. The transfer of these dimensions to the definitive prosthesis was achieved successfully, ultimately improving the patient's social and psychological well being.
- 25 October 2012
- Published by Wiley in Journal of Prosthodontics
- Vol. 22 (3) , 223-225
Fabrication of a Surgical Splint in an Emergency Situation: A Clinical Report
Fractures involving pediatric jaws most often require a splint to prevent the fragments from being displaced; however, impression making presents a challenge. This article describes the fabrication of a surgical splint over an ideal cast, which is subsequently refitted with a tissue conditioner onto the patient's jaw. The highlight of this technique is the elimination of an impression procedure, thereby reducing clinical and laboratory time and easing pain in the child.
- 25 October 2012
- Published by Wiley in Journal of Prosthodontics
- Vol. 22 (3) , 223-225
Fabrication of a Surgical Splint in an Emergency Situation: A Clinical Report
Fractures involving pediatric jaws most often require a splint to prevent the fragments from being displaced; however, impression making presents a challenge. This article describes the fabrication of a surgical splint over an ideal cast, which is subsequently refitted with a tissue conditioner onto the patient's jaw. The highlight of this technique is the elimination of an impression procedure, thereby reducing clinical and laboratory time and easing pain in the child.