Wen Guo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Wen Guo has a total of 89 co-authors. Here are the top co-authors by number of shared publications:
Fuxi Bao
School of Chemistry and Chemical Engineering/State Key Laboratory Incubation Base for Green Processing of Chemical Engineering, Shihezi University, Shihezi, 832003, China
7 shared publicationsJiaqi Chang
School of Chemistry and Chemical Engineering/State Key Laboratory Incubation Base for Green Processing of Chemical Engineering Shihezi University Shihezi China
7 shared publicationsJiahui Liu
School of Chemistry and Chemical Engineering/State Key Laboratory Incubation Base for Green Processing of Chemical Engineering Shihezi University Shihezi China
6 shared publicationsZhen Chen
Key Laboratory of Material Chemistry for Energy Conversion and Storage, Ministry of Education, Hubei Key Laboratory of Material Chemistry and Service Failure, School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074, P.R. China
6 shared publicationsLei Pang
DongFeng Trucks R&D Center, Wuhan 430056, P.R. China
5 shared publicationsShujun Ming
Key Laboratory of Material Chemistry for Energy Conversion and Storage, Ministry of Education, Hubei Key Laboratory of Material Chemistry and Service Failure, School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074, P.R. China
5 shared publications
Latest Publications
- 28 September 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (90)
Decouple and Synergize: D‐π Conjugation‐Enabled Remote Electronic Tuning of M‐O Sites for Enhanced C‐H/O‐H Cleavage in HMF Electrooxidation
Electrocatalytic 5‐hydroxymethylfurfural oxidation reaction (HMFOR) is a green biomass valorization route, yet its scalability is constrained by the intrinsically sluggish hydroxymethyl oxidation on transition‐metal‐based catalysts, which, unlike aldehyde oxidation, requires concurrent C‐H/O‐H cleavage and C(sp 3 ) → C(sp 2 ) rehybridization. However, current strategies lack atomic‐scale precision to accelerate this kinetics and establish clear structure‐performance relationships. Herein, M 3 (HHTP) 2 (M = Co, Cu) with atomically ordered and dispersed metal sites was designed to decouple intrinsic roles of M‐O sites in HMFOR. Building on this, bimetallic Co 1.8 Cu 1.2 (HHTP) 2 was constructed, harnessing d‐π conjugation for precise bidirectional long‐range electronic communication between spatially separated M‐O sites: Cu‐O kinetically accelerates the sluggish hydroxymethyl oxidation on Co‐O, while Co‐O reciprocally mitigates Cu‐O poisoning from excessive HMF adsorption, establishing a self‐sustaining electronic synergy. Meanwhile, differentiated OH − adsorption on the dual sites optimizes the H‐bond network, accelerating electrochemical‐chemical cycle at Co‐O. Ultimately, Co 1.8 Cu 1.2 (HHTP) 2 delivers a 2.7‐fold higher 2,5‐furandicarboxylic acid yield than Co 3 (HHTP) 2 and enables gram‐scale production of 99.4%‐pure 2,5‐furandicarboxylic acid via 2,5‐diformylfuran and 5‐hydroxymethyl‐2‐furancarboxylic acid pathways. This work establishes d‐π conjugation as a general strategy to decouple and synergize specific roles of spatially separated sites to overcome the rate‐determining step, providing a novel paradigm for rational catalyst design in complex multi‐step reactions.
- 28 September 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (90)
Decouple and Synergize: D‐π Conjugation‐Enabled Remote Electronic Tuning of M‐O Sites for Enhanced C‐H/O‐H Cleavage in HMF Electrooxidation
Electrocatalytic 5‐hydroxymethylfurfural oxidation reaction (HMFOR) is a green biomass valorization route, yet its scalability is constrained by the intrinsically sluggish hydroxymethyl oxidation on transition‐metal‐based catalysts, which, unlike aldehyde oxidation, requires concurrent C‐H/O‐H cleavage and C(sp 3 ) → C(sp 2 ) rehybridization. However, current strategies lack atomic‐scale precision to accelerate this kinetics and establish clear structure‐performance relationships. Herein, M 3 (HHTP) 2 (M = Co, Cu) with atomically ordered and dispersed metal sites was designed to decouple intrinsic roles of M‐O sites in HMFOR. Building on this, bimetallic Co 1.8 Cu 1.2 (HHTP) 2 was constructed, harnessing d‐π conjugation for precise bidirectional long‐range electronic communication between spatially separated M‐O sites: Cu‐O kinetically accelerates the sluggish hydroxymethyl oxidation on Co‐O, while Co‐O reciprocally mitigates Cu‐O poisoning from excessive HMF adsorption, establishing a self‐sustaining electronic synergy. Meanwhile, differentiated OH − adsorption on the dual sites optimizes the H‐bond network, accelerating electrochemical‐chemical cycle at Co‐O. Ultimately, Co 1.8 Cu 1.2 (HHTP) 2 delivers a 2.7‐fold higher 2,5‐furandicarboxylic acid yield than Co 3 (HHTP) 2 and enables gram‐scale production of 99.4%‐pure 2,5‐furandicarboxylic acid via 2,5‐diformylfuran and 5‐hydroxymethyl‐2‐furancarboxylic acid pathways. This work establishes d‐π conjugation as a general strategy to decouple and synergize specific roles of spatially separated sites to overcome the rate‐determining step, providing a novel paradigm for rational catalyst design in complex multi‐step reactions.
- 28 July 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (31) , 14005-14016
Self-Limited Reconstruction of NiFe-Based Electrocatalysts Enables Thousand-Hour Water Oxidation at Ampere-Level Current Densities
NiFe-based materials are highly promising electrocatalysts for the oxygen evolution reaction (OER), but they deeply reconstruct into the low-activity γ-NiFeOOH phase in alkaline media. Herein, we propose a corrosion strategy to achieve self-limited reconstruction (SLR) of NiFe-based electrocatalysts. Ultimately, the constructed (Fe0.67Ni0.33)OOH@FeP4 selectively reconstructs into highly active β-NiFeOOH rather than the less active γ-NiFeOOH. The SLR can be described as follows: when the (Fe0.67Ni0.33)OOH@FeP4 electrocatalyst is reconstructed into the β-NiFeOOH phase, the intrinsic characteristics of the electrocatalyst itself prevent the further transformation of β-NiFeOOH into the γ-NiFeOOH phase. In situ Raman, X-ray photoelectron spectroscopy, and density functional theory (DFT) calculations suggest that the synthesized (Fe0.67Ni0.33)OOH@FeP4 reconstructs into β-NiFeOOH featuring Fe−O−Ni linkages during OER, where electron transfer from Fe to Ni through Fe−O−Ni linkages suppresses the β-NiFeOOH to γ-NiFeOOH phase transition, thereby stabilizing the β-phase. DFT calculations reveal that the (Fe0.67Ni0.33)OOH@FeP4 enhances OER kinetics by promoting the formation of the *OOH intermediate. This mechanism enables the electrocatalyst to maintain excellent durability for over 1000 h in both the OER and overall water splitting at ≥1.0 A cm−2. In an anion-exchange membrane electrolyzer, it maintains 1.5 A cm−2 at 2.25 V for 150 h, superior to many NiFe-based electrocatalysts in the literature.
- 28 July 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (31) , 14005-14016
Self-Limited Reconstruction of NiFe-Based Electrocatalysts Enables Thousand-Hour Water Oxidation at Ampere-Level Current Densities
NiFe-based materials are highly promising electrocatalysts for the oxygen evolution reaction (OER), but they deeply reconstruct into the low-activity γ-NiFeOOH phase in alkaline media. Herein, we propose a corrosion strategy to achieve self-limited reconstruction (SLR) of NiFe-based electrocatalysts. Ultimately, the constructed (Fe0.67Ni0.33)OOH@FeP4 selectively reconstructs into highly active β-NiFeOOH rather than the less active γ-NiFeOOH. The SLR can be described as follows: when the (Fe0.67Ni0.33)OOH@FeP4 electrocatalyst is reconstructed into the β-NiFeOOH phase, the intrinsic characteristics of the electrocatalyst itself prevent the further transformation of β-NiFeOOH into the γ-NiFeOOH phase. In situ Raman, X-ray photoelectron spectroscopy, and density functional theory (DFT) calculations suggest that the synthesized (Fe0.67Ni0.33)OOH@FeP4 reconstructs into β-NiFeOOH featuring Fe−O−Ni linkages during OER, where electron transfer from Fe to Ni through Fe−O−Ni linkages suppresses the β-NiFeOOH to γ-NiFeOOH phase transition, thereby stabilizing the β-phase. DFT calculations reveal that the (Fe0.67Ni0.33)OOH@FeP4 enhances OER kinetics by promoting the formation of the *OOH intermediate. This mechanism enables the electrocatalyst to maintain excellent durability for over 1000 h in both the OER and overall water splitting at ≥1.0 A cm−2. In an anion-exchange membrane electrolyzer, it maintains 1.5 A cm−2 at 2.25 V for 150 h, superior to many NiFe-based electrocatalysts in the literature.
- 23 June 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (35)
Rational Molecular Design of a Multi‐Electron Organic Anode via Rapid Microwave Synthesis for Ultrastable NH 4 + Storage
Aqueous ammonium‐ion batteries (AAIBs) are promising energy storage devices, yet their development is hindered by the lack of high‐performance electrode materials. While small‐organic molecules possess structural tunability and diverse redox activity, their application is often limited by tedious synthesis, insufficient active‐sites, and dissolution in electrolytes. Herein, we synthesize a small‐organic molecule, DNQP, featuring multiple C═O/C═N redox‐active centers, via a rapid microwave route. This method completes the condensation between –NH 2 and C═O in 40 min (vs. 72 h for solvothermal), simultaneously introducing additional redox‐active C═N bonds and extending the π‐conjugated framework. Electronic structure analyses reveal that DNQP possesses an ultranarrow bandgap (1.053 eV), a highly delocalized π‐conjugated framework, and favorable π–π stacking channels for charge transport. These features, combined with a chelation‐coordination storage mechanism, enhance electron transfer, structural stability, and multi‐electron reactivity. As a result, DNQP achieves 79% redox‐site utilization, delivering a four‐electron capacity of 155.9 mAh g −1 at 0.1 A g −1 , and exhibits remarkable cycling performance over 12 000 cycles at 5 A g −1 . A DNQP//α‐MnO 2 full‐cell retains 99% capacity after 2000 cycles. Mechanism studies elucidate a reversible two‐step, four‐electron NH 4 + storage process governed by N─H⋯O/N─H⋯N H─bonding. This work offers a rational molecular design and rapid synthesis for high‐performance AAIBs organic materials.
- 23 June 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (35)
Rational Molecular Design of a Multi‐Electron Organic Anode via Rapid Microwave Synthesis for Ultrastable NH 4 + Storage
Aqueous ammonium‐ion batteries (AAIBs) are promising energy storage devices, yet their development is hindered by the lack of high‐performance electrode materials. While small‐organic molecules possess structural tunability and diverse redox activity, their application is often limited by tedious synthesis, insufficient active‐sites, and dissolution in electrolytes. Herein, we synthesize a small‐organic molecule, DNQP, featuring multiple C═O/C═N redox‐active centers, via a rapid microwave route. This method completes the condensation between –NH 2 and C═O in 40 min (vs. 72 h for solvothermal), simultaneously introducing additional redox‐active C═N bonds and extending the π‐conjugated framework. Electronic structure analyses reveal that DNQP possesses an ultranarrow bandgap (1.053 eV), a highly delocalized π‐conjugated framework, and favorable π–π stacking channels for charge transport. These features, combined with a chelation‐coordination storage mechanism, enhance electron transfer, structural stability, and multi‐electron reactivity. As a result, DNQP achieves 79% redox‐site utilization, delivering a four‐electron capacity of 155.9 mAh g −1 at 0.1 A g −1 , and exhibits remarkable cycling performance over 12 000 cycles at 5 A g −1 . A DNQP//α‐MnO 2 full‐cell retains 99% capacity after 2000 cycles. Mechanism studies elucidate a reversible two‐step, four‐electron NH 4 + storage process governed by N─H⋯O/N─H⋯N H─bonding. This work offers a rational molecular design and rapid synthesis for high‐performance AAIBs organic materials.
- 23 June 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (35) , e1957487
Rational Molecular Design of a Multi‐Electron Organic Anode via Rapid Microwave Synthesis for Ultrastable NH 4 + Storage
Aqueous ammonium‐ion batteries (AAIBs) are promising energy storage devices, yet their development is hindered by the lack of high‐performance electrode materials. While small‐organic molecules possess structural tunability and diverse redox activity, their application is often limited by tedious synthesis, insufficient active‐sites, and dissolution in electrolytes. Herein, we synthesize a small‐organic molecule, DNQP, featuring multiple C═O/C═N redox‐active centers, via a rapid microwave route. This method completes the condensation between –NH 2 and C═O in 40 min (vs. 72 h for solvothermal), simultaneously introducing additional redox‐active C═N bonds and extending the π‐conjugated framework. Electronic structure analyses reveal that DNQP possesses an ultranarrow bandgap (1.053 eV), a highly delocalized π‐conjugated framework, and favorable π–π stacking channels for charge transport. These features, combined with a chelation‐coordination storage mechanism, enhance electron transfer, structural stability, and multi‐electron reactivity. As a result, DNQP achieves 79% redox‐site utilization, delivering a four‐electron capacity of 155.9 mAh g −1 at 0.1 A g −1 , and exhibits remarkable cycling performance over 12 000 cycles at 5 A g −1 . A DNQP//α‐MnO 2 full‐cell retains 99% capacity after 2000 cycles. Mechanism studies elucidate a reversible two‐step, four‐electron NH 4 + storage process governed by N─H⋯O/N─H⋯N H─bonding. This work offers a rational molecular design and rapid synthesis for high‐performance AAIBs organic materials.
- 23 June 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (35) , e1957487
Rational Molecular Design of a Multi‐Electron Organic Anode via Rapid Microwave Synthesis for Ultrastable NH 4 + Storage
Aqueous ammonium‐ion batteries (AAIBs) are promising energy storage devices, yet their development is hindered by the lack of high‐performance electrode materials. While small‐organic molecules possess structural tunability and diverse redox activity, their application is often limited by tedious synthesis, insufficient active‐sites, and dissolution in electrolytes. Herein, we synthesize a small‐organic molecule, DNQP, featuring multiple C═O/C═N redox‐active centers, via a rapid microwave route. This method completes the condensation between –NH 2 and C═O in 40 min (vs. 72 h for solvothermal), simultaneously introducing additional redox‐active C═N bonds and extending the π‐conjugated framework. Electronic structure analyses reveal that DNQP possesses an ultranarrow bandgap (1.053 eV), a highly delocalized π‐conjugated framework, and favorable π–π stacking channels for charge transport. These features, combined with a chelation‐coordination storage mechanism, enhance electron transfer, structural stability, and multi‐electron reactivity. As a result, DNQP achieves 79% redox‐site utilization, delivering a four‐electron capacity of 155.9 mAh g −1 at 0.1 A g −1 , and exhibits remarkable cycling performance over 12 000 cycles at 5 A g −1 . A DNQP//α‐MnO 2 full‐cell retains 99% capacity after 2000 cycles. Mechanism studies elucidate a reversible two‐step, four‐electron NH 4 + storage process governed by N─H⋯O/N─H⋯N H─bonding. This work offers a rational molecular design and rapid synthesis for high‐performance AAIBs organic materials.
- 23 March 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (32) , 8193-8197
Surface sulfidation toward highly active S/NiMoSe for superior alkaline hydrogen evolution
S/NiMoSe hierarchical microspheres deliver exceptional alkaline HER performance with 41 h durability at −100 mA cm −2 via sulfidation-weakened H-bonding and protective SO 4 2− reconstruction.
- 23 March 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (32) , 8193-8197
Surface sulfidation toward highly active S/NiMoSe for superior alkaline hydrogen evolution
S/NiMoSe hierarchical microspheres deliver exceptional alkaline HER performance with 41 h durability at −100 mA cm −2 via sulfidation-weakened H-bonding and protective SO 4 2− reconstruction.
- 15 February 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 218
Accelerated electrochemical reconstruction in CeO2/NiFe2O4 hybrid for enhanced oxygen evolution kinetics
- 15 February 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 218
Accelerated electrochemical reconstruction in CeO2/NiFe2O4 hybrid for enhanced oxygen evolution kinetics
- 9 December 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (30)
A Dual‐Active‐Site Mechanism Enabled by a Fused Quinone Imine for Dissolution‐Resistant and High‐Capacity NH 4 + Storage
Aqueous ammonium‐ion batteries (AAIBs) are promising for next‐generation energy storage due to their safety, abundance, and fast kinetics, yet challenges such as electrode dissolution and poor conductivity hinder their development. Herein, hexaazatribenzanthraquinone (HAQ) is synthesized via activation of −NH 2 groups in 1,2‐diaminoanthraquinone, converting them into redox‐active C═N groups. This transformation enhances active site utilization and extends the conjugated structure, suppressing dissolution and improving electronic conductivity. HAQ exhibits a narrowed HOMO‐LUMO gap (0.743 eV), indicating enhanced electron delocalization and charge transfer. It operates via a dual‐active‐site mechanism involving C═O and C═N groups, enabling a high six‐electron transfer with ultra‐low energy barriers. Consequently, HAQ delivers a high capacity of 202 mAh g −1 at 0.2 A g −1 and exceptional cyclability (90% capacity retention after 6000 cycles at 8 A g −1 ). Moreover, the HAQ//α‐MnO 2 full cell delivers a high specific capacity of 168 mAh g −1 at 0.2 A g −1 and retains 98% of its initial capacity after 5000 cycles at 2 A g −1 . A combined ex/in situ and DFT study reveals a two‐step, six‐electron NH 4 + storage mechanism regulated by reversible hydrogen bonding. This work provides an effective molecular design strategy to simultaneously enhance dissolution resistance and electronic conductivity in organic electrodes for advanced AAIBs.
- 9 December 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (30)
A Dual‐Active‐Site Mechanism Enabled by a Fused Quinone Imine for Dissolution‐Resistant and High‐Capacity NH 4 + Storage
Aqueous ammonium‐ion batteries (AAIBs) are promising for next‐generation energy storage due to their safety, abundance, and fast kinetics, yet challenges such as electrode dissolution and poor conductivity hinder their development. Herein, hexaazatribenzanthraquinone (HAQ) is synthesized via activation of −NH 2 groups in 1,2‐diaminoanthraquinone, converting them into redox‐active C═N groups. This transformation enhances active site utilization and extends the conjugated structure, suppressing dissolution and improving electronic conductivity. HAQ exhibits a narrowed HOMO‐LUMO gap (0.743 eV), indicating enhanced electron delocalization and charge transfer. It operates via a dual‐active‐site mechanism involving C═O and C═N groups, enabling a high six‐electron transfer with ultra‐low energy barriers. Consequently, HAQ delivers a high capacity of 202 mAh g −1 at 0.2 A g −1 and exceptional cyclability (90% capacity retention after 6000 cycles at 8 A g −1 ). Moreover, the HAQ//α‐MnO 2 full cell delivers a high specific capacity of 168 mAh g −1 at 0.2 A g −1 and retains 98% of its initial capacity after 5000 cycles at 2 A g −1 . A combined ex/in situ and DFT study reveals a two‐step, six‐electron NH 4 + storage mechanism regulated by reversible hydrogen bonding. This work provides an effective molecular design strategy to simultaneously enhance dissolution resistance and electronic conductivity in organic electrodes for advanced AAIBs.
- 28 January 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (14)
Superconjugated Anthraquinone Carbonyl‐Based Covalent Organic Framework as Anode Material for High‐Performance Aqueous Ammonium‐Ion Batteries
Covalent organic frameworks (COFs) have recently been emerged as promising anode candidates for aqueous ammonium ion batteries (AAIBs), but suitable COFs need to be developed and the energy storage mechanisms need to be further investigated. Here we report an anthraquinone carbonyl‐containing COF as anode for AAIBs, which exhibits a high specific capacity of 141 mAh g−1 at 0.1 A g−1 and good cycling stability with 90 % retention after 8000 cycles at 6 A g−1. We find that the anthraquinone carbonyls (denoted as C=O1) with superconjugated structure in the COF can form hydrogen bonds with NH4+ ions, thus serving as optimal sites and providing the major contribution to NH4+ ion storage, whereas another type of carbonyls (denoted as C=O2) in the same COF suffers from enol‐keto tautomerism, which prevents the formation of hydrogen bonds and is therefore unfavourable for NH4+ ion storage. This is further verified by the theoretical calculations where the hydrogen bonding rate of C=O1 groups is much faster than that of C=O2. This work not only provides insights into understanding the mechanism of NH4+ ion storage, but also offers new ideas for the design of advanced COF‐based materials for AAIBs.
- 28 January 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (14)
Superconjugated Anthraquinone Carbonyl‐Based Covalent Organic Framework as Anode Material for High‐Performance Aqueous Ammonium‐Ion Batteries
Covalent organic frameworks (COFs) have recently been emerged as promising anode candidates for aqueous ammonium ion batteries (AAIBs), but suitable COFs need to be developed and the energy storage mechanisms need to be further investigated. Here we report an anthraquinone carbonyl‐containing COF as anode for AAIBs, which exhibits a high specific capacity of 141 mAh g−1 at 0.1 A g−1 and good cycling stability with 90 % retention after 8000 cycles at 6 A g−1. We find that the anthraquinone carbonyls (denoted as C=O1) with superconjugated structure in the COF can form hydrogen bonds with NH4+ ions, thus serving as optimal sites and providing the major contribution to NH4+ ion storage, whereas another type of carbonyls (denoted as C=O2) in the same COF suffers from enol‐keto tautomerism, which prevents the formation of hydrogen bonds and is therefore unfavourable for NH4+ ion storage. This is further verified by the theoretical calculations where the hydrogen bonding rate of C=O1 groups is much faster than that of C=O2. This work not only provides insights into understanding the mechanism of NH4+ ion storage, but also offers new ideas for the design of advanced COF‐based materials for AAIBs.
- 28 January 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (14) , e202424494
Superconjugated Anthraquinone Carbonyl‐Based Covalent Organic Framework as Anode Material for High‐Performance Aqueous Ammonium‐Ion Batteries
Covalent organic frameworks (COFs) have recently been emerged as promising anode candidates for aqueous ammonium ion batteries (AAIBs), but suitable COFs need to be developed and the energy storage mechanisms need to be further investigated. Here we report an anthraquinone carbonyl‐containing COF as anode for AAIBs, which exhibits a high specific capacity of 141 mAh g−1 at 0.1 A g−1 and good cycling stability with 90 % retention after 8000 cycles at 6 A g−1. We find that the anthraquinone carbonyls (denoted as C=O1) with superconjugated structure in the COF can form hydrogen bonds with NH4+ ions, thus serving as optimal sites and providing the major contribution to NH4+ ion storage, whereas another type of carbonyls (denoted as C=O2) in the same COF suffers from enol‐keto tautomerism, which prevents the formation of hydrogen bonds and is therefore unfavourable for NH4+ ion storage. This is further verified by the theoretical calculations where the hydrogen bonding rate of C=O1 groups is much faster than that of C=O2. This work not only provides insights into understanding the mechanism of NH4+ ion storage, but also offers new ideas for the design of advanced COF‐based materials for AAIBs.
- 28 January 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (14) , e202424494
Superconjugated Anthraquinone Carbonyl‐Based Covalent Organic Framework as Anode Material for High‐Performance Aqueous Ammonium‐Ion Batteries
Covalent organic frameworks (COFs) have recently been emerged as promising anode candidates for aqueous ammonium ion batteries (AAIBs), but suitable COFs need to be developed and the energy storage mechanisms need to be further investigated. Here we report an anthraquinone carbonyl‐containing COF as anode for AAIBs, which exhibits a high specific capacity of 141 mAh g−1 at 0.1 A g−1 and good cycling stability with 90 % retention after 8000 cycles at 6 A g−1. We find that the anthraquinone carbonyls (denoted as C=O1) with superconjugated structure in the COF can form hydrogen bonds with NH4+ ions, thus serving as optimal sites and providing the major contribution to NH4+ ion storage, whereas another type of carbonyls (denoted as C=O2) in the same COF suffers from enol‐keto tautomerism, which prevents the formation of hydrogen bonds and is therefore unfavourable for NH4+ ion storage. This is further verified by the theoretical calculations where the hydrogen bonding rate of C=O1 groups is much faster than that of C=O2. This work not only provides insights into understanding the mechanism of NH4+ ion storage, but also offers new ideas for the design of advanced COF‐based materials for AAIBs.