Dadarao N. Raut
Dadarao N. Raut has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Sushil Ingle
MET’s Institute of Engineering
2 shared publications - Amol Ashok Chavan
VJTI: Veermata Jijabai Technological Institute
1 shared publication - Atul N. Meshram
Production Engineering Department, VJTI, Matunga, Mumbai, India
1 shared publication - Milind Patil
Production Engineering Department, Veermata Jijabai Technological Institute (VJTI), Mumbai, India
1 shared publication - Mugdha Dongre
Production Engineering Department, Veermata Jijabai Technological Institute (VJTI), Mumbai, India
1 shared publication - Sameer S. Gajmal
Research Scholar, Veermata Jijabai Technological Institute, Mumbai, India
1 shared publication
Latest Publications
- Open Access
- 22 October 2026
- Published by Science Publishing Group in Advances in Materials
- Vol. 15 (4) , 148-160
Conversion of Microfibers to Cellulose Nanofibers (CNF) for High-performance 3D Printing Composites: A Review
The global transition toward a circular bio-economy has positioned Cellulose Nanofibers (CNF) as a premier sustainable alternative to petroleum-based reinforcements in additive manufacturing. This review provides a comprehensive meta-analysis of the "top-down" conversion of hierarchical microfibers into individualized nanofibers and their subsequent integration into high-performance 3D printing composites. We evaluate the synergistic effects of chemical pretreatments, specifically TEMPO mediated oxidation and acetylation on fiber morphology and interfacial compatibility. Multi-instrumental screening data revealed that while mechanical disintegration alone is energy-prohibitive >20,000 kWh/t, TEMPO-oxidation facilitates the liberation of nanofibers with ultra-high aspect ratios and uniform diameters of 3-5 nm at significantly reduced energy inputs. FTIR and XRD analyses confirm the successful substitution of hydrophilic hydroxyl groups without compromising the Cellulose I crystalline core, a critical factor for dispersion in hydrophobic polymers like PLA, ABS, and PP. Furthermore, we analyze the rheological and thermal bottlenecks of 3D printing; TGA and DTA results indicate a narrowed processing window 220°C for modified CNFs, while DMA profiling demonstrates a 25–40% increase in storage modulus above the glass transition temperature (Tg), effectively extending the structural utility of bio-polymers. The review concludes by identifying the "Future Scope" of the field, highlighting the need for solvent-free grafting techniques and thermal robustification to enable the next generation of industrial-scale, bio-reinforced additive manufacturing.
- 22 October 2026
- Published by Science Publishing Group in Advances in Materials
- Vol. 15 (4) , 148-160
Open AccessConversion of Microfibers to Cellulose Nanofibers (CNF) for High-performance 3D Printing Composites: A Review
The global transition toward a circular bio-economy has positioned Cellulose Nanofibers (CNF) as a premier sustainable alternative to petroleum-based reinforcements in additive manufacturing. This review provides a comprehensive meta-analysis of the "top-down" conversion of hierarchical microfibers into individualized nanofibers and their subsequent integration into high-performance 3D printing composites. We evaluate the synergistic effects of chemical pretreatments, specifically TEMPO mediated oxidation and acetylation on fiber morphology and interfacial compatibility. Multi-instrumental screening data revealed that while mechanical disintegration alone is energy-prohibitive >20,000 kWh/t, TEMPO-oxidation facilitates the liberation of nanofibers with ultra-high aspect ratios and uniform diameters of 3-5 nm at significantly reduced energy inputs. FTIR and XRD analyses confirm the successful substitution of hydrophilic hydroxyl groups without compromising the Cellulose I crystalline core, a critical factor for dispersion in hydrophobic polymers like PLA, ABS, and PP. Furthermore, we analyze the rheological and thermal bottlenecks of 3D printing; TGA and DTA results indicate a narrowed processing window 220°C for modified CNFs, while DMA profiling demonstrates a 25–40% increase in storage modulus above the glass transition temperature (Tg), effectively extending the structural utility of bio-polymers. The review concludes by identifying the "Future Scope" of the field, highlighting the need for solvent-free grafting techniques and thermal robustification to enable the next generation of industrial-scale, bio-reinforced additive manufacturing.
- 24 March 2026
- Published by Springer Nature
- p. 123-135
Socio-Technical Perspectives on AI Governance Addressing Ethics Fairness and Sustainable Machine Learning Practices
- 24 March 2026
- Published by Springer Nature
- p. 123-135
Socio-Technical Perspectives on AI Governance Addressing Ethics Fairness and Sustainable Machine Learning Practices
- 22 December 2024
- Published by Springer Nature in International Journal on Interactive Design and Manufacturing (IJIDeM)
- Vol. 19 (9) , 6065-6091
Experimental comparison to optimize defects in aluminium alloy (A356) casting using Taguchi DOE and MCDM
- 22 December 2024
- Published by Springer Nature in International Journal on Interactive Design and Manufacturing (IJIDeM)
- Vol. 19 (9) , 6065-6091
Experimental comparison to optimize defects in aluminium alloy (A356) casting using Taguchi DOE and MCDM
- 15 May 2023
- Published by Taylor & Francis in Australian Journal of Mechanical Engineering
- Vol. 22 (5) , 958-972
Performance evaluation of process parameters using MCDM methods for Titanium Alloy (Ti6al4v) in turning operation
- 15 May 2023
- Published by Taylor & Francis in Australian Journal of Mechanical Engineering
- Vol. 22 (5) , 958-972
Performance evaluation of process parameters using MCDM methods for Titanium Alloy (Ti6al4v) in turning operation
- 23 March 2023
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 10 (3) , 1-21
Evaluation of tool wears mechanism considering machining parameters and performance parameters for titanium alloy in turning operation on CNC
Titanium alloys are frequently utilised in applications that call for high strength at high temperatures as well as excellent mechanical resistance. This alloy has excellent mechanical properties that enable improved performance from titanium alloys. In the current research, Taguchi L25 orthogonal array of experiments were conducted first, and MCDM techniques and ANNOVA were utilised to forecast the influencing machining factors. From MCDM three methods (SAW, VIKOR & TOPSIS) prediction algorithms which rank one for experiment no. 2. Experiment results shows that experiment no. 02 gives optimum/best results in terms of Tool life and surface roughness. While the process parameter has values cutting speed = 80 rpm, Feed rate = 018 rev/mm, Depth of cut = 0.12 mm, and Rake angle = 14 degrees. From ANOVA outcome for surface finish it is noticed that the process parameter rake angle is having Rank 01 for all levels. Thus rake angle is major influencing parameter to achieve a better quality of surface roughness. While in case of flank wear it is crystal clear that the process parameter DOC is having Rank 01 for all levels. Thus DOC is most influencing parameter to achieve lesser flank wear and better quality of tool life.
- 23 March 2023
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 10 (3) , 1-21
Evaluation of tool wears mechanism considering machining parameters and performance parameters for titanium alloy in turning operation on CNC
Titanium alloys are frequently utilised in applications that call for high strength at high temperatures as well as excellent mechanical resistance. This alloy has excellent mechanical properties that enable improved performance from titanium alloys. In the current research, Taguchi L25 orthogonal array of experiments were conducted first, and MCDM techniques and ANNOVA were utilised to forecast the influencing machining factors. From MCDM three methods (SAW, VIKOR & TOPSIS) prediction algorithms which rank one for experiment no. 2. Experiment results shows that experiment no. 02 gives optimum/best results in terms of Tool life and surface roughness. While the process parameter has values cutting speed = 80 rpm, Feed rate = 018 rev/mm, Depth of cut = 0.12 mm, and Rake angle = 14 degrees. From ANOVA outcome for surface finish it is noticed that the process parameter rake angle is having Rank 01 for all levels. Thus rake angle is major influencing parameter to achieve a better quality of surface roughness. While in case of flank wear it is crystal clear that the process parameter DOC is having Rank 01 for all levels. Thus DOC is most influencing parameter to achieve lesser flank wear and better quality of tool life.
- 30 June 2020
- Published by Springer Nature
- p. 115-126
In-situ Microwave-Assisted Casting of ASTM B23 Tin-Based Babbitt Alloy
- 30 June 2020
- Published by Springer Nature
- p. 115-126
In-situ Microwave-Assisted Casting of ASTM B23 Tin-Based Babbitt Alloy