Qingwei Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qingwei Chen has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Yifei Wu
Nanjing University of Science and Technology
3 shared publications Jian Guo
School of Automation
2 shared publications- Wei Chen
School of Automation, Nanjing University of Science and Technology, Nanjing 210094, China
2 shared publications - Zhihong Wang
School of Automation, NUST, Nanjing 210094
2 shared publications - Arash Mohammadi
Concordia University
1 shared publication - Bin Yao
School of Mechanical Engineering, Purdue University, West Lafayette, IN, USA
1 shared publication
Latest Publications
- 4 December 2019
- Published by Springer Nature
- p. 851-862
Adaptive Sliding Model Controller Design of Carlike Robot Speed and Steering Angle Based on Characteristic Model
- 4 December 2019
- Published by Springer Nature
- p. 851-862
Adaptive Sliding Model Controller Design of Carlike Robot Speed and Steering Angle Based on Characteristic Model
- 7 August 2019
- Published by Springer Nature
- p. 337-346
Reducing Bullwhip Effects in Supply Chain Systems via $ \varvec{H}_{\infty } $ Control- 7 August 2019
- Published by Springer Nature
- p. 337-346
Reducing Bullwhip Effects in Supply Chain Systems via $ \varvec{H}_{\infty } $ Control- Open Access
- 1 January 2018
- Published by Wiley in Complexity
- Vol. 2018 (1)
Attack Detection/Isolation via a Secure Multisensor Fusion Framework for Cyberphysical Systems
Motivated by rapid growth of cyberphysical systems (CPSs) and the necessity to provide secure state estimates against potential data injection attacks in their application domains, the paper proposes a secure and innovative attack detection and isolation fusion framework. The proposed multisensor fusion framework provides secure state estimates by using ideas from interactive multiple models (IMM) combined with a novel fuzzy‐based attack detection/isolation mechanism. The IMM filter is used to adjust the system’s uncertainty adaptively via model probabilities by using a hybrid state model consisting of two behaviour modes, one corresponding to the ideal scenario and one associated with the attack behaviour mode. The state chi‐square test is then incorporated through the proposed fuzzy‐based fusion framework to detect and isolate potential data injection attacks. In other words, the validation probability of each sensor is calculated based on the value of the chi‐square test. Finally, by incorporation of the validation probability of each sensor, the weights of its associated subsystem are computed. To be concrete, an integrated navigation system is simulated with three types of attacks ranging from a constant bias attack to a non‐Gaussian stochastic attack to evaluate the proposed attack detection and isolation fusion framework.
- 1 January 2018
- Published by Wiley in Complexity
- Vol. 2018 (1)
Open AccessAttack Detection/Isolation via a Secure Multisensor Fusion Framework for Cyberphysical Systems
Motivated by rapid growth of cyberphysical systems (CPSs) and the necessity to provide secure state estimates against potential data injection attacks in their application domains, the paper proposes a secure and innovative attack detection and isolation fusion framework. The proposed multisensor fusion framework provides secure state estimates by using ideas from interactive multiple models (IMM) combined with a novel fuzzy‐based attack detection/isolation mechanism. The IMM filter is used to adjust the system’s uncertainty adaptively via model probabilities by using a hybrid state model consisting of two behaviour modes, one corresponding to the ideal scenario and one associated with the attack behaviour mode. The state chi‐square test is then incorporated through the proposed fuzzy‐based fusion framework to detect and isolate potential data injection attacks. In other words, the validation probability of each sensor is calculated based on the value of the chi‐square test. Finally, by incorporation of the validation probability of each sensor, the weights of its associated subsystem are computed. To be concrete, an integrated navigation system is simulated with three types of attacks ranging from a constant bias attack to a non‐Gaussian stochastic attack to evaluate the proposed attack detection and isolation fusion framework.
- Open Access
- 10 November 2015
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2015, 1-13
DistributedConsensus Control of Networked Control Systems with Time-Triggered ProtocolThe analysis and design of traditional networked control systems focused on single closed-loop scenario. This paper introduces a distributed control approach for the networked control systems (NCSs) with multiple subsystems based on a time-triggered network protocol. Firstly, some basic ideas of the time-triggered protocol are introduced and a time schedule scheme is employed for the NCS. Then, a novel model is proposed to the NCS regarding the network-induced delay. The resulting closed-loop system is time-delay linear system considering a distributed control law. A sufficient condition toconsensus control is present based on the Lyapunov-Krasovskii function. Also, the controller design approach towards the givenperformance index is given by a cone complement linearization and iterative algorithm. Finally, numerical examples are given to validate the approach.- 10 November 2015
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2015, 1-13
Open AccessDistributedConsensus Control of Networked Control Systems with Time-Triggered ProtocolThe analysis and design of traditional networked control systems focused on single closed-loop scenario. This paper introduces a distributed control approach for the networked control systems (NCSs) with multiple subsystems based on a time-triggered network protocol. Firstly, some basic ideas of the time-triggered protocol are introduced and a time schedule scheme is employed for the NCS. Then, a novel model is proposed to the NCS regarding the network-induced delay. The resulting closed-loop system is time-delay linear system considering a distributed control law. A sufficient condition toconsensus control is present based on the Lyapunov-Krasovskii function. Also, the controller design approach towards the givenperformance index is given by a cone complement linearization and iterative algorithm. Finally, numerical examples are given to validate the approach. - Open Access
- 21 October 2015
- Published by Wiley in Journal of Control Science and Engineering
- Vol. 2015, 1-16
High-Order Sliding Mode-Based Synchronous Control of a Novel Stair-Climbing Wheelchair Robot
For the attitude control of a novel stair-climbing wheelchair with inertial uncertainties and external disturbance torques, a new synchronous control method is proposed via combing high-order sliding mode control techniques with cross-coupling techniques. For this purpose, a proper controller is designed, which can improve the performance of the system under conditions of uncertainties and torque perturbations and also can guarantee the synchronization of the system. Firstly, a robust high-order sliding mode control law is designed to track the desired position trajectories effectively. Secondly, considering the coordination of the multiple joints, a high-order sliding mode synchronization controller is designed to reduce the synchronization errors and tracking errors based on the controller designed previously. Stability of the closed-loop system is proved by Lyapunov theory. The simulation is performed by MATLAB to verify the effectiveness of the proposed controller. By comparing the simulation results of two controllers, it is obvious that the proposed scheme has better performance and stronger robustness.
- 21 October 2015
- Published by Wiley in Journal of Control Science and Engineering
- Vol. 2015, 1-16
Open AccessHigh-Order Sliding Mode-Based Synchronous Control of a Novel Stair-Climbing Wheelchair Robot
For the attitude control of a novel stair-climbing wheelchair with inertial uncertainties and external disturbance torques, a new synchronous control method is proposed via combing high-order sliding mode control techniques with cross-coupling techniques. For this purpose, a proper controller is designed, which can improve the performance of the system under conditions of uncertainties and torque perturbations and also can guarantee the synchronization of the system. Firstly, a robust high-order sliding mode control law is designed to track the desired position trajectories effectively. Secondly, considering the coordination of the multiple joints, a high-order sliding mode synchronization controller is designed to reduce the synchronization errors and tracking errors based on the controller designed previously. Stability of the closed-loop system is proved by Lyapunov theory. The simulation is performed by MATLAB to verify the effectiveness of the proposed controller. By comparing the simulation results of two controllers, it is obvious that the proposed scheme has better performance and stronger robustness.
- Open Access
- 17 March 2015
- Published by Wiley in Journal of Control Science and Engineering
- Vol. 2015, 1-12
Discrete Second-Order Sliding Mode Adaptive Controller Based on Characteristic Model for Servo Systems
Considering the varying inertia and load torque in high speed and high accuracy servo systems, a novel discrete second-order sliding mode adaptive controller (DSSMAC) based on characteristic model is proposed, and a command observer is also designed. Firstly, the discrete characteristic model of servo systems is established. Secondly, the recursive least square algorithm is adopted to identify time-varying parameters in characteristic model, and the observer is applied to predict the command value of next sample time. Furthermore, the stability of the closed-loop system and the convergence of the observer are analyzed. The experimental results show that the proposed method not only can adapt to varying inertia and load torque, but also has good disturbance rejection ability and robustness to uncertainties.
- 17 March 2015
- Published by Wiley in Journal of Control Science and Engineering
- Vol. 2015, 1-12
Open AccessDiscrete Second-Order Sliding Mode Adaptive Controller Based on Characteristic Model for Servo Systems
Considering the varying inertia and load torque in high speed and high accuracy servo systems, a novel discrete second-order sliding mode adaptive controller (DSSMAC) based on characteristic model is proposed, and a command observer is also designed. Firstly, the discrete characteristic model of servo systems is established. Secondly, the recursive least square algorithm is adopted to identify time-varying parameters in characteristic model, and the observer is applied to predict the command value of next sample time. Furthermore, the stability of the closed-loop system and the convergence of the observer are analyzed. The experimental results show that the proposed method not only can adapt to varying inertia and load torque, but also has good disturbance rejection ability and robustness to uncertainties.
- Open Access
- 1 January 2014
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2014 (1)
Characteristic Modeling and Control of Servo Systems with Backlash and Friction
A novel approach for modeling and control of servo systems with backlash and friction is proposed based on the characteristic model. Firstly, to deal with friction‐induced nonlinearities, a smooth Stribeck friction model is introduced. The backlash is modeled by a continuous and derivable mathematical function. Secondly, a characteristic model in the form of a second‐order slowly time‐varying difference equation is established and verified by simulations. Thirdly, a composite controller including the golden‐section adaptive control law and the integral control law is designed and the stability of the closed‐loop system is analyzed. The simulation and experimental results show that the proposed control scheme is effective and can improve the steady‐state precision and the dynamic performance of the servo system with backlash and friction.
- 1 January 2014
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2014 (1)
Open AccessCharacteristic Modeling and Control of Servo Systems with Backlash and Friction
A novel approach for modeling and control of servo systems with backlash and friction is proposed based on the characteristic model. Firstly, to deal with friction‐induced nonlinearities, a smooth Stribeck friction model is introduced. The backlash is modeled by a continuous and derivable mathematical function. Secondly, a characteristic model in the form of a second‐order slowly time‐varying difference equation is established and verified by simulations. Thirdly, a composite controller including the golden‐section adaptive control law and the integral control law is designed and the stability of the closed‐loop system is analyzed. The simulation and experimental results show that the proposed control scheme is effective and can improve the steady‐state precision and the dynamic performance of the servo system with backlash and friction.
- 1 December 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1962-1967
Adaptive robust control for nonlinear system with input backlash or backlash-like hysteresis
An adaptive robust control (ARC) algorithm is developed for a class of uncertain dynamic nonlinear system with unknown input backlash or backlash-like hysteresis, parametric uncertainties and uncertain disturbances. Due to the non-smooth dynamic nonlinear nature of backlash, existing robust adaptive control methods mainly focus on using approximate inversion of backlash by on-line parameter adaptation. But experimental results show that a linear controller alone can perform better than a controller including the selected backlash inverter with a correctly estimated or overestimated backlash gap. Unlike many existing control schemes, the backlash inverse is not constructed in this paper. A new linearly parameterized model for backlash is presented. The backlash nonlinearity is linearly parameterized globally with bounded model error as backlash-like hysteresis. The adaptive robust control law is designed to ensure that all closed-loop signals are bounded and achieve the tracking within the desired precision. Simulations results illustrate the performance of the proposed ARC.
- 1 December 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1962-1967
Adaptive robust control for nonlinear system with input backlash or backlash-like hysteresis
An adaptive robust control (ARC) algorithm is developed for a class of uncertain dynamic nonlinear system with unknown input backlash or backlash-like hysteresis, parametric uncertainties and uncertain disturbances. Due to the non-smooth dynamic nonlinear nature of backlash, existing robust adaptive control methods mainly focus on using approximate inversion of backlash by on-line parameter adaptation. But experimental results show that a linear controller alone can perform better than a controller including the selected backlash inverter with a correctly estimated or overestimated backlash gap. Unlike many existing control schemes, the backlash inverse is not constructed in this paper. A new linearly parameterized model for backlash is presented. The backlash nonlinearity is linearly parameterized globally with bounded model error as backlash-like hysteresis. The adaptive robust control law is designed to ensure that all closed-loop signals are bounded and achieve the tracking within the desired precision. Simulations results illustrate the performance of the proposed ARC.
- 25 June 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 3, 1731-1733 vol.3
Robust H/sub ∞/ control of interval systems using the delta operator
This paper deals with the problem of robust stabilization of interval systems using the delta operator. Base on a kind of equivalent presentation of the interval systems, some sufficient conditions of robust stabilization of the systems are derived. The state feedback control for robust stabilization can be obtained by solving Riccati inequalities, which can stabilize the systems and guarantee a prescribed H/sub /spl infin// performance on attenuation of all admissible parameter uncertainties. The proposed approach can unify the related results of the continuous and discrete interval systems into the delta framework.
- 25 June 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 3, 1731-1733 vol.3
Robust H/sub ∞/ control of interval systems using the delta operator
This paper deals with the problem of robust stabilization of interval systems using the delta operator. Base on a kind of equivalent presentation of the interval systems, some sufficient conditions of robust stabilization of the systems are derived. The state feedback control for robust stabilization can be obtained by solving Riccati inequalities, which can stabilize the systems and guarantee a prescribed H/sub /spl infin// performance on attenuation of all admissible parameter uncertainties. The proposed approach can unify the related results of the continuous and discrete interval systems into the delta framework.