PJPyar Singh Jassal

Pyar Singh Jassal

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pyar Singh Jassal has a total of 13 co-authors. Here are the top co-authors by number of shared publications:

  • Rajni Johar

    Department of Chemistry, Maitreyi College University of Delhi Delhi India

    5 shared publications
  • Raj Pal Singh

    Institute of Defence Scientists and Technologists, CFEES Campus DRDO Delhi India

    4 shared publications
  • Tribhuvan Kumar Pathak

    Institute of Defence Scientists and Technologists, CFEES Campus DRDO Delhi India

    4 shared publications
  • Vandana Sharma

    Department of Chemistry, Sri Guru Tegh Bahadur Khalsa College University of Delhi Delhi India

    4 shared publications
  • Satya Prakash Dobhal

    Environmental Safety Group (EnSG), Centre for Fire, Explosive and Environment Safety DRDO Delhi India

    2 shared publications
  • Hari Mohan Meena

    Department of Chemistry, Hansraj College, University of Delhi, New Delhi, India

    1 shared publication

Latest Publications

  • Open Access

    Preparation, Characterization of Magnetic Chitosan nanoparticles Coated with Fe3O4 Prepared by Ex-situ Co-precipitation Method

    by Hari Mohan Meena, Shrikant Kukreti, P.S Jassal

    The suspension cross-linking technique has been utilized to create the magnetic chitosan nanoparticles, which were then applied to the magnetic carrier method at 80°C. First the FeCl2 and FeCl3 solution co-precipitated and synthesized Fe3O4 for utilization in the formation of magnetic chitosan nanoparticles, it has been characterized by utilizing DLS (Dynamic light scattering), XRD (X-ray diffraction spectrometer), FTIR (Fourier transform infrared spectroscopy), which identified structure, size, FE-SEM (Field Emission Scanning Electron Microscope) and HR-TEM (High-resolution transmission electron microscopy) which identified structure and particle size whereas magnetic behavior of chitosan nanoparticles was determined by VSM (Vibrating sample magnetometer). According to the results collected, the magnetic chitosan nanoparticles have been spherical in form and size ranging from around 250 to 400 nm.


  • Performance evaluation of guar gum and conventional binders based fire‐extinguishing aerosol‐forming composites

    by Satya Prakash Dobhal, Tribhuvan Kumar Pathak, Vandana Sharma, Raj Pal Singh, Santosh Kumar Singh, Pyar Singh Jassal, Rajni Johar

    Pyrotechnic‐based firefighting systems have been found to be effective in a wide variety of firefighting applications. Binders in pyrotechnic mixtures play a significant role as they consolidate the ingredients, provide excellent mechanical strength and increase the storage life. The rise in health and environmental safety concerns in recent years has directed our research towards natural binder systems of biological origins. Therefore, in this work, galactomannan, also called guar gum, was comparatively investigated against four different types of conventional binders, phenol–formaldehyde resin, ethyl cellulose, hydroxyethyl cellulose and carboxymethyl cellulose sodium salt, which are being used in aerosol‐forming pyrotechnic mixtures for firefighting application. It was found that the nature of the binder in an amount of 3% by weight significantly influences the combustion behaviour, fire suppression performance, mechanical and thermal characteristics of gallic acid–KNO3–KClO3 tertiary aerosol‐forming pyrotechnic mixture for fire fighting application. The safety and performance characteristics of these formulations were evaluated by conducting analyses specific to pyrotechnic formulations, that is, burn rate measurement, heat of combustion, TGA/DSC thermal analysis, hygroscopic study, compression test and n‐heptane pool fire suppression test. It can be inferred from the values obtained from these analyses that guar gum is a preferred binder to the other four‐binder systems for the gallic acid–KNO3–KClO3 pyrotechnic mixture.


  • Bio‐modified pyrotechnic composite materials for firefighting application

    by Tribhuvan Kumar Pathak, Vandana Sharma, Pyar Singh Jassal, Raj Pal Singh, Rajni Johar

    Summary: The traditional aerosol‐forming composites are a mixture of potassium nitrate/chlorate and synthetic resins like phenol‐formaldehyde, melamine‐formaldehyde, polyurethane, and epoxy resin. Though these synthetic organic resins have excellent adhesion and mechanical properties, their high flammability and associated life‐threatening occupational hazard have limited their application. Such compositions' combustion flame may reach up to 2100°C and cause secondary fire risk in an explosive atmosphere, especially ship engine rooms and oil‐producing platforms. This study aimed to investigate the ability of natural flame‐retardant tannic acid, which is a natural phenolic compound abundant in many plants, to reduce the exothermicity of potassium nitrate/chlorate‐based pyrotechnic composite. In the present work, we newly developed a pyrotechnic composition that employed tannic acid as a reducer instead of synthetic resin. Its combustion behaviour, thermal properties, and fire extinguishing performance were comparatively evaluated against phenolic resin‐based traditional pyrotechnic composition. Though both the new and traditional pyrotechnic composition has shown similar fire extinguishing efficacy, the newly developed composition showed 57% lower combustion flame temperature, faster burn rate, and lower calorific value than the traditional composition. The physical and chemical characteristics of the discharged aerosol were characterized by a series of techniques viz; high‐resolution X‐ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and energy dispersive X‐ray analysis to understand the fire extinguishing mechanism.


  • A Comparative Evaluation of Natural and Synthetic Binder Systems and their Influence on the Thermal and Mechanical Properties of Gallic Acid‐KNO3‐KClO3 Tertiary Pyrotechnic Mixture

    by Tribhuvan Kumar Pathak, Vandana Sharma, Pyar Singh Jassal, Raj Pal Singh, Rajni Johar

    Tannic acid is a natural binder that was comparatively investigated against four different types of conventional synthetic binders phenol‐formaldehyde resin, carboxymethyl cellulose sodium salt, ethylcellulose, and hydroxyethylcellulose which are being used in aerosol forming pyrotechnic formulations for firefighting application. It has been found that the nature of the binder in an amount of 3 % significantly influences the fire suppression performance, thermal and mechanical characteristics of gallic acid‐based aerosol‐forming pyrotechnic mixture. The safety and performance characteristics of these formulations were evaluated by conducting analysis specific to pyrotechnic formulations, i. e., calorimetric analysis, linear solid strand burn rate measurement, TGA/DSC thermal analysis, compression test, moisture content, and fire suppression test. These formulations were designed to discharge fire extinguishing aerosol and it can be inferred from the values obtained from these analyses that tannic acid is a preferred binder to the other four binder systems for the Gallic acid‐KNO3‐KClO3 pyrotechnic mixture.


  • Adsorption of nickel (II) ions from wastewater using glutaraldehyde cross-linked magnetic chitosan beads: isotherm, kinetics and thermodynamics

    by Priti Rani, Rajni Johar, P. S. Jassal

    The magnetic chitosan beads (MCSB) prepared from the solution by using the external magnet and the adsorption of Ni (II) ions from wastewater and its cross-linked derivative with glutaraldehyde (GLU-MCSB) was investigated in a adsorption system. The GLU-MCSB sorbents that are insoluble in aqueous acidic solution and improve adsorption capacity. Adsorption process was carried out by considering into various parameters viz. adsorbent dose, contact time, pH and temperature. TGA of beads show that degradation takes place in two stages. FTIR spectra of magnetic beads exhibit absorption band at 606 cm−1 for Fe-O. The elemental analysis (EDAX) and scanning electron microscopy (SEM) were used to analyze the structure and characteristics of MCSB and GLU-MCSB. The Ni(II) removal efficiency attains a highest value of 95.12% with cross-linked GLU-MCSB in comparison 79.5% with MCSB. Adsorption processes follow the pseudo second-order rate kinetics model, which suggested that the rate-limiting step may be the chemical adsorption rather than the mass transport. The experimental data of adsorption fitted well with the Langmuir and Freundlich isotherms with a high correlation coefficient (R2 > 0.9), showing that monolayer adsorption took place on the surface of GLU-MCBS absorbents. The negative values of ΔS, −175.64 and −163.30 J/mol K and ΔH, −54.75 and −49.58 kJ/mol for MCSB and GLU-MCSB suggest that process is spontaneous and exothermic in nature.


  • Evaluation of small scale n‐heptane fire extinguishing efficacy by natural antioxidants based pyrotechnic compositions: An experimental study

    by Tribhuvan Kumar Pathak, Kumar Kaushik, Satya Prakash Dobhal, Pradeep Kumar Dixit, Vandana Sharma, Rajni Johar, Pyar Singh Jassal, Raj Pal Singh

    Summary: The conventional pyrotechnic compositions (PCs) for firefighting application mostly consist of potassium nitrate, chlorate or perchlorate as oxidants and organic resin‐like phenol‐formaldehyde, melamine‐formaldehyde, epoxy resin and polyurethanes are used as reducers. Unfortunately, there are also some potential disadvantages to the use of conventional compositions. These are related to high combustion temperature with the generation of heat and flame which may cause secondary fire chances and hazards associated with the use of organic resins. Exposure to phenol, melamine, epoxy resins and polyurethanes are considered as a life‐threatening occupational hazard. Under the present study, new pyrotechnic compositions were prepared with the combination of natural antioxidants like ascorbic acid and gallic acid as reductant and mixture of potassium nitrate with potassium chlorate as oxidant. Fire extinguishing efficacies, calorific value, burn rate, the flame temperature of newly developed compositions was evaluated against potassium nitrate and phenol‐formaldehyde resin‐based conventional composition. Although both the new and conventional composition has shown good fire extinguishing efficacies, extinguishing 4.57 KW of small scale n‐heptane pool fire in 3 to 4 seconds, these newly developed compositions showed 67% to 76% reduction in flame temperature. It was also found that these new compositions exhibit a faster burn rate and lower calorific value than the conventional composition. To understand the fire extinguishing mechanism by the discharged aerosol particulate, its physical and chemical characteristics were assessed by a series of techniques viz; HRXRD, SEM, FTIR, EDX.