Vanya Goel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Vanya Goel has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Amitava Roy
Homi Bhabha National Institute, Mumbai, India
3 shared publications - Namita Maiti
Homi Bhabha National Institute, Mumbai, India
3 shared publications A. Roy
Homi Bhabha National Institute, Mumbai, 400 085, India
1 shared publication- D. S. Patil
Department of Metallurgical Engineering and Materials Science, Semiconductor Thin Film and Plasma Processing Laboratory, Indian Institute of Technology Bombay, Mumbai, Maharashtra, India
1 shared publication N. Maiti
Homi Bhabha National Institute, Mumbai, 400 085, India
1 shared publication- Rajib Kar
Homi Bhabha National Institute, Mumbai, India
1 shared publication
Latest Publications
- 18 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (7) , 3833-3841
Improvement of Electron Gun Breakdown Performance Through Surface Flashover and Discharge Studies
The reliable and uninterrupted operation of electron gun for refractory metal melting application requires a systematic study of surface flashover and electron beam-generated plasma discharge (EB-GPD) characteristics. These are highly influenced by insulator and target material characteristics. However, both lead to high-voltage (HV) breakdown of electron gun due to electric field intensification, insulator failure due to its sputtering and coating by backscattered electrons as well as secondary emitted electrons from the target material. This article deals with performance optimization of 2700-bent directly heated electron gun (DHEG) for device improvement. To achieve this, systematic study and analysis of insulator and target materials have been done through: 1) detailed 3-D simulations to study surface flashover by investigating electric field intensification in electron gun and 2) detailed study of discharge characteristics to investigate backscattered and secondary emitted electrons. The 3-D electrostatic, electromagnetic, and particle tracking simulations are done by using the Computer Simulation Technology (CST) Studio Particle tracking module. Discharge properties are evaluated by using disk-type Langmuir probe (LP) measurements accompanied by detailed mathematical calculations. This work helps to address the HV breakdown issue in electron gun, which is of great practical significance.
- 18 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (7) , 3833-3841
Improvement of Electron Gun Breakdown Performance Through Surface Flashover and Discharge Studies
The reliable and uninterrupted operation of electron gun for refractory metal melting application requires a systematic study of surface flashover and electron beam-generated plasma discharge (EB-GPD) characteristics. These are highly influenced by insulator and target material characteristics. However, both lead to high-voltage (HV) breakdown of electron gun due to electric field intensification, insulator failure due to its sputtering and coating by backscattered electrons as well as secondary emitted electrons from the target material. This article deals with performance optimization of 2700-bent directly heated electron gun (DHEG) for device improvement. To achieve this, systematic study and analysis of insulator and target materials have been done through: 1) detailed 3-D simulations to study surface flashover by investigating electric field intensification in electron gun and 2) detailed study of discharge characteristics to investigate backscattered and secondary emitted electrons. The 3-D electrostatic, electromagnetic, and particle tracking simulations are done by using the Computer Simulation Technology (CST) Studio Particle tracking module. Discharge properties are evaluated by using disk-type Langmuir probe (LP) measurements accompanied by detailed mathematical calculations. This work helps to address the HV breakdown issue in electron gun, which is of great practical significance.
- 5 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (10) , 3539-3546
Optimization of Spatial Parameters of a 2.45-GHz Atmospheric Pressure Cold Plasma Jet: Comparison Between Multiphysics Simulation and Experimental Results
In this article, the optimization of spatial parameters of a 2.45-GHz atmospheric pressure plasma jet (APPJ) at different operational parameters has been done. For this purpose, simulations and experiments have been carried out to investigate the spatial dimensions of the microwave cold plasma jet generated from the device. To achieve this, the plasma discharge behavior and jet formation have been studied at different working gas flow rates and input microwave power. The 3-D simulations have been carried out by using the plasma module and electromagnetic wave module of COMSOL Multiphysics v. 5.5. Experimental validation was achieved and simulated spatial dimensions of plasma jet showed good correspondence with the experimental results. Simulated variations of jet length and diameter with gas flow rate and applied power matched closely with experimental results. Intrinsic plasma parameters, such as electron temperature ( $T_{e})$ and number density ( $n_{e})$ , were also obtained with the simulation model and compared with experimental findings based on optical emission spectroscopy (OES) results and $T_{e}$ values matched well in both cases.
- 5 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (10) , 3539-3546
Optimization of Spatial Parameters of a 2.45-GHz Atmospheric Pressure Cold Plasma Jet: Comparison Between Multiphysics Simulation and Experimental Results
In this article, the optimization of spatial parameters of a 2.45-GHz atmospheric pressure plasma jet (APPJ) at different operational parameters has been done. For this purpose, simulations and experiments have been carried out to investigate the spatial dimensions of the microwave cold plasma jet generated from the device. To achieve this, the plasma discharge behavior and jet formation have been studied at different working gas flow rates and input microwave power. The 3-D simulations have been carried out by using the plasma module and electromagnetic wave module of COMSOL Multiphysics v. 5.5. Experimental validation was achieved and simulated spatial dimensions of plasma jet showed good correspondence with the experimental results. Simulated variations of jet length and diameter with gas flow rate and applied power matched closely with experimental results. Intrinsic plasma parameters, such as electron temperature ( $T_{e})$ and number density ( $n_{e})$ , were also obtained with the simulation model and compared with experimental findings based on optical emission spectroscopy (OES) results and $T_{e}$ values matched well in both cases.
- 2 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 48 (9) , 3098-3108
A Novel Technique for Optimizing 270°-Bent Electron Gun for Evaporation Applications
In this article, a novel approach for optimizing a practical 270° bent electron gun has been proposed by using JUPYTER NOTEBOOK, an open-source web application utilizing PYTHON script, aiding faster data processing and mathematical computations. For this purpose, a 3-D cost function has been formulated to optimize the position of the anode with respect to the filament which aims at maximizing the beam power density, maximizing beam parallelism or laminar flow and optimizing beam shape. CST Studio-Particle Tracking Module is used for gun design, magnetic field design, and for the study and analysis of generated electron beam trajectories by performing both electrostatic and electromagnetic 3-D gun simulations. Unlike the conventional 270° bent transverse electron guns using Helmholtz coils for generating uniform magnetic fields, here permanent magnets have been used for generating nonuniform magnetic fields making the overall system compact along with electromagnets and magnetic shunts for precise beam maneuvering. Magnetic fields are experimentally measured by using Gauss meter which match well with that of the simulated values. The electron gun was fabricated and trial experiments were conducted under high vacuum environment. Experimental validation was done by puncturing a stainless steel plate kept at 90° and 270° positions above the crucible and the results match well with the simulated results.
- 2 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 48 (9) , 3098-3108
A Novel Technique for Optimizing 270°-Bent Electron Gun for Evaporation Applications
In this article, a novel approach for optimizing a practical 270° bent electron gun has been proposed by using JUPYTER NOTEBOOK, an open-source web application utilizing PYTHON script, aiding faster data processing and mathematical computations. For this purpose, a 3-D cost function has been formulated to optimize the position of the anode with respect to the filament which aims at maximizing the beam power density, maximizing beam parallelism or laminar flow and optimizing beam shape. CST Studio-Particle Tracking Module is used for gun design, magnetic field design, and for the study and analysis of generated electron beam trajectories by performing both electrostatic and electromagnetic 3-D gun simulations. Unlike the conventional 270° bent transverse electron guns using Helmholtz coils for generating uniform magnetic fields, here permanent magnets have been used for generating nonuniform magnetic fields making the overall system compact along with electromagnets and magnetic shunts for precise beam maneuvering. Magnetic fields are experimentally measured by using Gauss meter which match well with that of the simulated values. The electron gun was fabricated and trial experiments were conducted under high vacuum environment. Experimental validation was done by puncturing a stainless steel plate kept at 90° and 270° positions above the crucible and the results match well with the simulated results.