Hambardzum G. Khachatryan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hambardzum G. Khachatryan has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
Sergey S. Hayrapetyan
Chair of Inorganic and Analytical Chemistry, YSU, Armenia
4 shared publicationsS.S. Hayrapetyan
Department of Chemistry, Yerevan State University, 1, Alek Manoukian Street, 375025 Yerevan, Armenia
2 shared publicationsUwe D. Neue
Waters Corporation, Milford, USA
2 shared publicationsLilit S. Banyan
Yerevan State University
1 shared publicationLusine G. Mangasaryan
Yerevan State University
1 shared publication- Martin S. Hayrapetyan
Chair of Inorganic and Analytical Chemistry, YSU, Armenia
1 shared publication
Latest Publications
- Open Access
- 6 July 2023
- Published by Yerevan State University in Proceedings of the YSU B: Chemical and Biological Sciences
- Vol. 57 (2 (261)) , 90-99
OLIVINE-BASED SORBENTS FOR REMOVAL OF HEAVY METALS
Inductively coupled plasma mass spectrometry (ISP-MS) and scanning electron microscope-X-ray fluorescence (SEM-XRF) methods were used for the investigation of olivine sorption properties. It has been shown, that olivine may be applied as a cheap and available material for the sorption of metals, including heavy metals, from wastewater. The comparatively low sorption capacity of olivine may pay off by its accessibility and cheapness. The mechanism of adsorption on the olivine surface may be described as the substitution of magnesium ions by cations of various metals. One trend can be fixed – when ionic radius of the metal cations increases, their sorption increases as well. However, it is hardly possible to tie everything with the ionic radius of metal ion. The specificity of each element is also important.
- 6 July 2023
- Published by Yerevan State University in Proceedings of the YSU B: Chemical and Biological Sciences
- Vol. 57 (2 (261)) , 90-99
Open AccessOLIVINE-BASED SORBENTS FOR REMOVAL OF HEAVY METALS
Inductively coupled plasma mass spectrometry (ISP-MS) and scanning electron microscope-X-ray fluorescence (SEM-XRF) methods were used for the investigation of olivine sorption properties. It has been shown, that olivine may be applied as a cheap and available material for the sorption of metals, including heavy metals, from wastewater. The comparatively low sorption capacity of olivine may pay off by its accessibility and cheapness. The mechanism of adsorption on the olivine surface may be described as the substitution of magnesium ions by cations of various metals. One trend can be fixed – when ionic radius of the metal cations increases, their sorption increases as well. However, it is hardly possible to tie everything with the ionic radius of metal ion. The specificity of each element is also important.
- 1 January 2008
- Published by Springer Nature
- p. 323-329
Obtaining of the Hybrid Slica-Polymer Sorbents for Liquid Chromatography
- 1 January 2008
- Published by Springer Nature
- p. 323-329
Obtaining of the Hybrid Slica-Polymer Sorbents for Liquid Chromatography
- 7 April 2006
- Published by Wiley in Journal of Separation Science
- Vol. 29 (6) , 801-809
A detailed discussion of the influence of the amount of deposited polymer on the retention properties of polymer‐coated silicas
Problems of the modification of the surface of micro‐spherical silica gel with layers of polymer and the influence of the quantity of the coated polymer on the chromatographic properties of the resulting sorbents have been considered. The polymer modification of the surface of wide‐pore micro‐spherical silica gel obtained by means of hydrothermal treatment of the meso‐porous silica gel under autoclave conditions is described. The polymer layer itself is formed by an octadecylmethacrylate‐methylmethacrylate co‐polymer. As a result, packings for RP‐HPLC were obtained. An increase of the capacity factor (k) has been observed with an increase of the quantity of the polymer deposited during the polymer modification process. The indicated phenomenon depends on the increase of the number of C18 groups in the packing.
- 7 April 2006
- Published by Wiley in Journal of Separation Science
- Vol. 29 (6) , 801-809
A detailed discussion of the influence of the amount of deposited polymer on the retention properties of polymer‐coated silicas
Problems of the modification of the surface of micro‐spherical silica gel with layers of polymer and the influence of the quantity of the coated polymer on the chromatographic properties of the resulting sorbents have been considered. The polymer modification of the surface of wide‐pore micro‐spherical silica gel obtained by means of hydrothermal treatment of the meso‐porous silica gel under autoclave conditions is described. The polymer layer itself is formed by an octadecylmethacrylate‐methylmethacrylate co‐polymer. As a result, packings for RP‐HPLC were obtained. An increase of the capacity factor (k) has been observed with an increase of the quantity of the polymer deposited during the polymer modification process. The indicated phenomenon depends on the increase of the number of C18 groups in the packing.
- 7 April 2006
- Published by Wiley in Journal of Separation Science
- Vol. 29 (6) , 810-819
Changes in the pore character of silicas caused by surface bonding and polymer coating
The pore character of packings for liquid chromatography, especially reversed‐phase (RPLC) packings, has been studied by means of the nitrogen adsorption method (BET method). Micro‐spherical silica gels with 9, 12, 30, 40 and 50 nm average pore diameter have been used as carriers. These silica gels have been modified with monochlorodimethyloctadecylsilane and several polymers (polyoctadecylmethacrylate‐methylmethacrylate co‐polymer, polyacrylamide gel, polyvinyl alcohol, poly‐2‐hydroxyethylmethacrylate). A larger decrease in the specific surface area values was observed in the case of the polymer coating with the polyoctadecylmethacrylate‐methylmethacrylate co‐polymer compared with the derivatization by silanes or the modification with polymers without C18‐groups. A new approach has been suggested to explain some questions concerning the interpretation of the data obtained during the measurements of the pore characteristics of the derivatized packings. An attempt has been made to reveal peculiarities connecting values of the measured surface of RP‐packings with the specific surface area values of the initial silica, as well as with the chromatographically accessible surface.
- 7 April 2006
- Published by Wiley in Journal of Separation Science
- Vol. 29 (6) , 810-819
Changes in the pore character of silicas caused by surface bonding and polymer coating
The pore character of packings for liquid chromatography, especially reversed‐phase (RPLC) packings, has been studied by means of the nitrogen adsorption method (BET method). Micro‐spherical silica gels with 9, 12, 30, 40 and 50 nm average pore diameter have been used as carriers. These silica gels have been modified with monochlorodimethyloctadecylsilane and several polymers (polyoctadecylmethacrylate‐methylmethacrylate co‐polymer, polyacrylamide gel, polyvinyl alcohol, poly‐2‐hydroxyethylmethacrylate). A larger decrease in the specific surface area values was observed in the case of the polymer coating with the polyoctadecylmethacrylate‐methylmethacrylate co‐polymer compared with the derivatization by silanes or the modification with polymers without C18‐groups. A new approach has been suggested to explain some questions concerning the interpretation of the data obtained during the measurements of the pore characteristics of the derivatized packings. An attempt has been made to reveal peculiarities connecting values of the measured surface of RP‐packings with the specific surface area values of the initial silica, as well as with the chromatographically accessible surface.
- 27 May 2005
- Published by Springer Nature in Chromatographia
- Vol. 61 (11-12) , 609-613
Polymer-Mineral Porous Materials Based on the Wide-Porous Silica and Poly-Hydroxyethylmethacrylate
- 27 May 2005
- Published by Springer Nature in Chromatographia
- Vol. 61 (11-12) , 609-613
Polymer-Mineral Porous Materials Based on the Wide-Porous Silica and Poly-Hydroxyethylmethacrylate
- 1 December 2004
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 78 (2-3) , 151-157
Control of the growth processes of the silica sols colloidal particles
- 1 December 2004
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 78 (2-3) , 151-157
Control of the growth processes of the silica sols colloidal particles
- 24 November 2004
- Published by Springer Nature in Chromatographia
- Vol. 61 (1-2) , 43-47
Polymer-Modified Silica Adsorbent with Reversed-Phase and Weak Cation-Exchange Groups
- 24 November 2004
- Published by Springer Nature in Chromatographia
- Vol. 61 (1-2) , 43-47
Polymer-Modified Silica Adsorbent with Reversed-Phase and Weak Cation-Exchange Groups
- 8 July 2004
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 72 (1-3) , 105-110
Porosity appearance in cobalt ferrite and changes under the thermal treatment of co-precipitated iron(II) and cobalt(II) oxalates
- 8 July 2004
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 72 (1-3) , 105-110
Porosity appearance in cobalt ferrite and changes under the thermal treatment of co-precipitated iron(II) and cobalt(II) oxalates