АКА.в. Кудрявцев

А.в. Кудрявцев

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


А.в. Кудрявцев has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • The application of combined deep lowering of the deposits in the cultivation of technical hemp

    by Ф.л. Блинов, А.в. Кудрявцев

    Материал, представленный в данной работе, был реализован в период с апреля по октябрь 2022 года в ФГБОУ ВО Тверская ГСХА и несет научно-практический характер. В настоящей работе освещены достижения молодых ученых при решении проблемы регулирования водно-воздушного режима почвы в разрезе мелиорации залежных земель избыточного увлажнения Нечерноземной зоны РФ. Также представлена рабочая и реализованная на практике модель системы «глубокорыхлитель-дренер-почва», направленная на коренное улучшение состояния плодородия почв залежи, с целью увеличения урожайности стратегически важных технических прядильных культур, в частности технической конопли. Коллективом была определена методика проведения полевых исследований, элементы и описание которой представлены в данной работе и будут являться разделами диссертации на соискание ученой степени кандидата технических наук. По результатам проведенных полевых исследований коллективом авторов установлено, что использование комбинированной системы безотвальной основной обработки почвы ведет к увеличению урожайности соломы технической конопли на 13,16%, что дает основание рекомендовать вовлечение данной технологии в реальное производство различных форм хозяйствования с положительным экономическим эффектом, подтверждённым в предыдущих работах авторов. The material presented in this paper was implemented from April to October 2022 at the Tver State Agricultural Academy and is of a scientific and practical nature. This paper highlights the achievements of young scientists in solving the problem of regulating the water-air regime of the soil in the context of reclamation of fallow lands of excessive moisture in the Non-Chernozem zone of the Russian Federation. Also presented is a working and implemented model of the "subsoiler-drainer-soil" system, aimed at radically improving the state of soil fertility in the fallow, in order to increase the yield of strategically important industrial spinning crops, in particular industrial hemp. The team determined the methodology for conducting field research, the elements and description of which are presented in this paper will be sections of the dissertation for the degree of candidate of technical sciences. Based on the results of field studies, a team of authors found that the use of a combined system of non-moldboard main tillage leads to an increase in the yield of technical hemp straw by 13.16%, which gives reason to recommend the involvement of this technology in the actual production of various forms of management, with a positive economic effect, confirmed in previous works of the authors.

  • Optimization of operating modes of the teasing machine of the combine harvester for harvesting industrial crops

    by А.в. Виноградов, А.с. Фирсов, А.в. Кудрявцев, Ф.л. Блинов, В.в. Голубев

    Материал, представленный в данной работе, был реализован в период с марта по ноябрь 2022 года в ФГБОУ ВО Тверская ГСХА и несёт научно-практический характер этапа уборки технических культур. В представленной работе отражены результаты цифровой трансформации на этапе подготовки к лабораторным исследованиям с применением аддитивных технологий, что позволило снизить трудоёмкость и материалоёмкость при изготовлении конструктивных элементов лабораторной установки. Полученные результаты лабораторно-полевых исследований достоверны, что подтверждается проверкой в соответствии с общепринятыми методиками. Использование инновационного теребильного аппарата с оптимальным количеством выступов 6 штук позволяет снизить растянутость стеблей до 3 – 7% в сравнении со штатным шкивом. The material presented in this work was implemented from March to November 2022 at the Federal State Budgetary Institution of Higher Education of the Tver State Agricultural Academy and carries the scien- tific and practical nature of the stage of harvesting technical crops. The presented work reflects the results of digital transformation at the stage of preparation for laboratory research using additive technologies, which made it possible to reduce the labor and material consumption during the manufacture of structural elements of the laboratory installation. The obtained results of laboratory and field studies are reliable, which is confirmed by verification in accordance with generally accepted methods. The use of an innovative tiebreaker with an optimal number of protrusions of 6 pieces allows you to reduce the stretch of the stems to 3 – 7% in comparison with the standard pulley.


  • Еhe use of digitalization in the design of elements of technical systems in agribusiness

    by А.в. Кудрявцев, Ф.л. Блинов, В.в. Голубев, И.с. Комелькова

    При подготовке современного кадрового потенциала для удовлетворения потребности научно- исследовательских институтов, специализированных конструкторских бюро одним из требований является знание элементов цифровизации при воплощении ряда действий в соответствии с требованиями ГОСТ 2.102-2013 ЕСКД. Широкий спектр разрабатываемых и испытываемых рабочих органов сельскохозяйственных машин, начиная от возделывания культурных растений и заканчивая их глубокой переработкой, напрямую связан с возможным использованием современных достижений при проектировании как отдельных элементов технических систем, так и в целом комплексов для механизации технологических процессов. Совместно с ФГБНУ ФНЦ ЛК к вопросу качественной подготовки кадрового потенциала подошли на кафедре технологических и транспортных машин и комплексов (ТТМ) ФГБОУ ВО Тверская ГСХА. Акцентируя внимание на интересах обучающихся, а также возможности широкого использования их потенциала, начиная с получения знаний, заканчивая подтверждением своих навыков и владений на различных уровнях семинаров, конкурсах, конференциях и выставках, явилось возможным внедрение в учебно-научный процесс ряда дисциплин, связанных с разработкой элементов технических систем в агробизнесе (ТСА). Полученные знания на дисциплинах Компьютерная графика, Детали машин, Компьютерное конструирование обучающиеся отражают не только в виде расчётных плоскостных изображений, но и имеют широкую возможность реализации 3D-макетирования. Любой желающий, имеющий соответствующий уровень подготовки для работы с программными комплексами, такими как Компас – 3D, имеет не только возможность изучить и закрепить собственные знания в отделах двух организаций, но и получить рабочую профессию «Промышленный дизайнер (Эргономист)». Воссозданные элементы технических систем для обработки полей гербицидами могут быть апробированы с применением рабочей профессии по управлению беспилотными летательными средствами соответствующей массы. When preparing modern human resources to meet the needs of research institutes, specialized design bureaus, one of the requirements is knowledge of the elements of digitalization when implementing a number of actions in accordance with the requirements of GOST 2.102-2013 ESKD. A wide range of developed and tested working bodies of agricultural machines, ranging from the cultivation of cultivated plants and ending with their deep processing, is directly related to the possible use of modern achievements in the design of both individual elements of technical systems and, in general, complexes for the mechanization of technological processes. Together with the Federal State Budgetary Scientific Institution of the Federal Scientific Center of the LK, the issue of high-quality training of human resources was approached at the Department of Technological and Transport Machines and Complexes (TTM) of the FGBOU HE Tverskaya State Agricultural Academy. Focusing on the interests of students, as well as the possibility of wide use of their potential, from gaining knowledge to confirming their skills and knowledge at various levels of seminars, competitions, conferences and exhibitions, it was possible to introduce a number of disciplines related to the development of elements of technical systems in agribusiness (TSA). The acquired knowledge in the disciplines of Computer Graphics, Machine Parts, Computer Design studentsreflectnotonlyintheformofcalculatedplanarimages, butalsohaveawidepossibilityofimplementing 3D prototyping. Anyone who has the appropriate level of training to work with software systems, such as Compass - 3 D, has not only the opportunity to study and consolidate their own knowledge in the departments of the two organizations, but also to get the working profession "Industrial Designer (Ergonomist)". The recreated elements of technical systems for the treatment of fields with herbicides can be tested with the use of a working profession in controlling unmanned aerial vehicles of the appropriate weight.

  • Open Access

    Improvement of forage lands in Central Non-Black Earth Zone of Russia by using some integrated approaches

    by Nikolay Vasilievich Aldoshin, Alexander Sergeevich Vasiliev, Andrey Vasilievich Kudryavtsev, Anton Sergeevich Firsov, Vyacheslav Viktorovich Golubev, Lyudmila Yuryevna Vasilieva

    In an activity system aimed at creation of high-quality fodder base for animal agriculture, crop science plays the main role. It facilitates the increase in the productivity of forage crops, which guarantees the relevance of efficiency studies and the developed technologies for improving forage lands. The research was aimed at studying the impact of integrated approaches to improving forage lands in the Central Non-Black Earth Zone. The objectives of the research were as follows: to present a methodology for monitoring agricultural fields for the subsequent improvement of forage lands; to develop an efficient technology for improving forage lands using modern mechanization means; to study the productivity of different grass mixtures when implementing various options for soil cultivation. Based on the results of three years of theoretical and experimental research, a technological scheme for fodder land improvement (including technical processes) was compiled: monitoring of fields, preparation of grass mixtures and mineral fertilizers, preparation and tuning of machine-tractor aggregates, assessment of the yield of two-time grass cutting and secondary monitoring of fields. The proposed technology included several levelling technological operations (including levelling of hillocks), operations for the preparation of the seedbed and the seed material in the form of grass mixtures and mineral fertilizers and subsequent strip sowing. It has been established that when improving fodder lands as well as the quality of soil preparation, the prevalence of milling created more favorable conditions for increasing productivity of perennial grasses compared to disking.