Zhiming Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Zhiming Chen has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
- Jianyi Luo
Research Center of Flexible Sensing Materials and Devices, School of Applied Physics and Materials, Wuyi University, Jiangmen 529020, China
7 shared publications Fengming Hu
6 shared publicationsJingcheng Huang
5 shared publicationsBaowen Liang
Research Center of Flexible Sensing Materials and Devices School of Applied Physics and Materials Wuyi University Jiangmen 529020 China
4 shared publicationsGuoning Chen
WYU-Flexwarm Joint Lab for Flexible Sensing Technologies Guangzhou CarbonSens Technology Co., Ltd. Guangzhou 511483 China
4 shared publicationsXiaoyan Hu
Research Center of Flexible Sensing Materials and Devices School of Applied Physics and Materials Wuyi University Jiangmen 529020 China
4 shared publications
Latest Publications
- 3 January 2026
- Published by Elsevier in Measurement
- Vol. 264
A novel tactile tomography system based on mechanical principles for internal 3D imaging
- 3 January 2026
- Published by Elsevier in Measurement
- Vol. 264
A novel tactile tomography system based on mechanical principles for internal 3D imaging
- 12 November 2024
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 12 (2) , 418-433
Top-down architecture of magnetized micro-cilia and conductive micro-domes as fully bionic electronic skin for de-coupled multidimensional tactile perception
Electronic skin (E-skin) has attracted considerable attention for simulating the human sensory system for use in prosthetics, human–machine interactions, and healthcare monitoring. However, it is still challenging to fully mimic the skin function that can de-couple stimuli such as normal/tangential forces, contact/non-contact behaviors, and react to high-frequency inputs. Herein, we propose fully bionic E-skin (FBE-skin), which consists of a magnetized micro-cilia array (MMCA), a micro-dome array (MDA), and flexible electrodes to completely duplicate the hairy layer, epidermis/dermis interface, and subcutaneous mechanoreceptors of human skin. The optimized MDA and interdigital electrode enable the FBE-skin to perceive static forces with a linear sensitivity of 96.6 kPa−1 up to 100 kPa, while the branch of electromagnetic induction allows the FBE-skin to sensitively capture dynamic stimuli with vibrating signals up to 100 Hz. The top-down integration of MDA and MMCA not only replicates the three-dimensional structure of human skin, but also synergistically provides the FBE-skin with bionic rapidly adapting (RA) and slowly adapting (SA) receptors. Consequently, the FBE-skin is capable of perceiving dynamic/static, normal/tangential, and contact/non-contact stimuli with a broad range of working pressures and frequencies. We expect that the design of FBE-skin will be promising for widespread applications from intelligent sensing to human–machine interactions.
- 12 November 2024
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 12 (2) , 418-433
Top-down architecture of magnetized micro-cilia and conductive micro-domes as fully bionic electronic skin for de-coupled multidimensional tactile perception
Electronic skin (E-skin) has attracted considerable attention for simulating the human sensory system for use in prosthetics, human–machine interactions, and healthcare monitoring. However, it is still challenging to fully mimic the skin function that can de-couple stimuli such as normal/tangential forces, contact/non-contact behaviors, and react to high-frequency inputs. Herein, we propose fully bionic E-skin (FBE-skin), which consists of a magnetized micro-cilia array (MMCA), a micro-dome array (MDA), and flexible electrodes to completely duplicate the hairy layer, epidermis/dermis interface, and subcutaneous mechanoreceptors of human skin. The optimized MDA and interdigital electrode enable the FBE-skin to perceive static forces with a linear sensitivity of 96.6 kPa−1 up to 100 kPa, while the branch of electromagnetic induction allows the FBE-skin to sensitively capture dynamic stimuli with vibrating signals up to 100 Hz. The top-down integration of MDA and MMCA not only replicates the three-dimensional structure of human skin, but also synergistically provides the FBE-skin with bionic rapidly adapting (RA) and slowly adapting (SA) receptors. Consequently, the FBE-skin is capable of perceiving dynamic/static, normal/tangential, and contact/non-contact stimuli with a broad range of working pressures and frequencies. We expect that the design of FBE-skin will be promising for widespread applications from intelligent sensing to human–machine interactions.
- 10 April 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (18) , 6568-6577
Sensitivity–stability trade-off in conductive foam-based pressure sensors
Flexible conductive foam-based pressure sensors, as a crucial component of wearable electronics, have garnered extensive attention in the fields of soft robotics and human–machine interaction due to their light weight, simple fabrication process and low cost. The majority of published studies, however, have focused on their foundational mechanical sensing properties including high sensitivity, wide detection range, etc., while ignoring the instability caused by low interfacial bonding strength between conductive fillers and foam skeleton, as well as the external environment in practical applications. Herein, through surface modification and interfacial microstructure design, a piezoresistive foam-type pressure sensor with high sensitivity and high stability is developed. The synergistic effect of the combination of surface modification and interfacial microstructure endows the sensor with great sensitivity (14.16 kPa−1 for the pressure range of 0–5 kPa), a low limit of detection (∼6.3 × 10−6 kPa), and exceptional durability (over 13 000 compression/recovery cycles). Furthermore, a wireless pressure acquisition system based on a 5 × 5 piezoresistive foam-type sensor array is developed, which can accurately recognize the spatial pressure distribution of the placed objects. This work presents a straightforward approach for realizing the trade-off between sensitivity and stability of conductive foam-based sensors, paving the way for their practical applications in wearable electronics, bionic robots, and other fields.
- 10 April 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (18) , 6568-6577
Sensitivity–stability trade-off in conductive foam-based pressure sensors
Flexible conductive foam-based pressure sensors, as a crucial component of wearable electronics, have garnered extensive attention in the fields of soft robotics and human–machine interaction due to their light weight, simple fabrication process and low cost. The majority of published studies, however, have focused on their foundational mechanical sensing properties including high sensitivity, wide detection range, etc., while ignoring the instability caused by low interfacial bonding strength between conductive fillers and foam skeleton, as well as the external environment in practical applications. Herein, through surface modification and interfacial microstructure design, a piezoresistive foam-type pressure sensor with high sensitivity and high stability is developed. The synergistic effect of the combination of surface modification and interfacial microstructure endows the sensor with great sensitivity (14.16 kPa−1 for the pressure range of 0–5 kPa), a low limit of detection (∼6.3 × 10−6 kPa), and exceptional durability (over 13 000 compression/recovery cycles). Furthermore, a wireless pressure acquisition system based on a 5 × 5 piezoresistive foam-type sensor array is developed, which can accurately recognize the spatial pressure distribution of the placed objects. This work presents a straightforward approach for realizing the trade-off between sensitivity and stability of conductive foam-based sensors, paving the way for their practical applications in wearable electronics, bionic robots, and other fields.
- Open Access
- 27 January 2023
- Published by Wiley in Advanced Intelligent Systems
- Vol. 5 (5)
Digitizing Human Motion via Bending Sensors toward Humanoid Robot
A humanoid robot is an advanced representation of robot techniques. It can move like a human and possesses the ability to use human tools. Sensing and intelligent control technologies have increased the intelligence of humanoid robots. However, the dexterity of a humanoid robot is still far from that of a human. Herein, a bending sensor is introduced to detect human motion, which can thus be digitized to enable a humanoid robot to learn to be more dexterous. This bending sensor is fabricated of carbon fiber with a cascade structure, resulting in excellent characteristics, including a quantitative detection capability, high gauge factor, low hysteresis, long‐term durability, and high‐frequency response. Thus, the bending sensor can recognize both the large‐scale motion of joint bending and subtle motion of muscle contraction. Fourteen bending sensors corresponding to the 14 knuckles of the human hand can accurately recognize and digitize hand gestures. These multichannel sensors are combined with nine additional bending sensors to comprehensively digitize the grasping process of the upper limb and recognize the grasping of objects with different sizes and weights. These successful applications demonstrate that the bending sensor can open a path toward learning human behavior for a humanoid robot.
- 27 January 2023
- Published by Wiley in Advanced Intelligent Systems
- Vol. 5 (5)
Open AccessDigitizing Human Motion via Bending Sensors toward Humanoid Robot
A humanoid robot is an advanced representation of robot techniques. It can move like a human and possesses the ability to use human tools. Sensing and intelligent control technologies have increased the intelligence of humanoid robots. However, the dexterity of a humanoid robot is still far from that of a human. Herein, a bending sensor is introduced to detect human motion, which can thus be digitized to enable a humanoid robot to learn to be more dexterous. This bending sensor is fabricated of carbon fiber with a cascade structure, resulting in excellent characteristics, including a quantitative detection capability, high gauge factor, low hysteresis, long‐term durability, and high‐frequency response. Thus, the bending sensor can recognize both the large‐scale motion of joint bending and subtle motion of muscle contraction. Fourteen bending sensors corresponding to the 14 knuckles of the human hand can accurately recognize and digitize hand gestures. These multichannel sensors are combined with nine additional bending sensors to comprehensively digitize the grasping process of the upper limb and recognize the grasping of objects with different sizes and weights. These successful applications demonstrate that the bending sensor can open a path toward learning human behavior for a humanoid robot.
- 21 October 2022
- Published by Wiley in Advanced Engineering Materials
- Vol. 24 (10)
Waterproof, Anti‐Impacted, and Ultrathin Carbon‐Based Air Pressure Sensors Toward Aerodynamic Tests on High‐Speed Trains
- 21 October 2022
- Published by Wiley in Advanced Engineering Materials
- Vol. 24 (10)
Waterproof, Anti‐Impacted, and Ultrathin Carbon‐Based Air Pressure Sensors Toward Aerodynamic Tests on High‐Speed Trains
- 19 May 2022
- Published by Wiley in Advanced Engineering Materials
- Vol. 24 (10)
Waterproof, Anti‐Impacted, and Ultrathin Carbon‐Based Air Pressure Sensors Toward Aerodynamic Tests on High‐Speed Trains
Air pressure sensors play a crucial role in aerodynamic tests on high‐speed trains, especially when the aerodynamic problems become more significant when the speed of high‐speed trains increases. The air pressure sensors used for aerodynamic testing of high‐speed trains are currently based on microelectromechanical systems (MEMS), which are thick, difficult to adjust linear range, and easily damaged by overloading force and water, thus cannot satisfy all‐weather train aerodynamic monitoring. Herein, a flexible ultrathin air pressure sensor for aerodynamic testing of high‐speed trains is reported; this sensor is based on a sensing material of carbon fiber beams and a sealed microchamber structure. The microchamber structure model allows the sensor to achieve high sensitivity in the target linear range by adjusting the initial internal pressure of the sealed microchamber. Meanwhile, the sealed microchamber structure enables the sensor to be waterproof and anti‐impacted. The sensor can work in water for at least 500 min and remain undamaged after being run over by a car with a weight of approximately 1550 kg. Furthermore, this air pressure sensor has been successfully applied in real‐time train surface pressure monitoring and shows the fantastic perspective for sensors toward aerodynamic tests on the high‐speed trains.
- 19 May 2022
- Published by Wiley in Advanced Engineering Materials
- Vol. 24 (10)
Waterproof, Anti‐Impacted, and Ultrathin Carbon‐Based Air Pressure Sensors Toward Aerodynamic Tests on High‐Speed Trains
Air pressure sensors play a crucial role in aerodynamic tests on high‐speed trains, especially when the aerodynamic problems become more significant when the speed of high‐speed trains increases. The air pressure sensors used for aerodynamic testing of high‐speed trains are currently based on microelectromechanical systems (MEMS), which are thick, difficult to adjust linear range, and easily damaged by overloading force and water, thus cannot satisfy all‐weather train aerodynamic monitoring. Herein, a flexible ultrathin air pressure sensor for aerodynamic testing of high‐speed trains is reported; this sensor is based on a sensing material of carbon fiber beams and a sealed microchamber structure. The microchamber structure model allows the sensor to achieve high sensitivity in the target linear range by adjusting the initial internal pressure of the sealed microchamber. Meanwhile, the sealed microchamber structure enables the sensor to be waterproof and anti‐impacted. The sensor can work in water for at least 500 min and remain undamaged after being run over by a car with a weight of approximately 1550 kg. Furthermore, this air pressure sensor has been successfully applied in real‐time train surface pressure monitoring and shows the fantastic perspective for sensors toward aerodynamic tests on the high‐speed trains.
- 15 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 5, 354-359
Integrated Waveform Design of OFDM Radar Communication on Airborne Moving Platform
In modern and future fighter air combat, formation coordination in the aircrew is very important on the battlefield, and the narrow fighter space needs to carry a variety of electronic equipment. The integrated radar communication technology can combine the original independent radar and The integration of the communication system into a comprehensive integrated combat platform can not only meet the combat needs of the new era and new scenarios, but also has important significance for the future generation of fighter jets. This paper conducts an in-depth study on an integrated waveform of OFDM radar communication.
- 15 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 5, 354-359
Integrated Waveform Design of OFDM Radar Communication on Airborne Moving Platform
In modern and future fighter air combat, formation coordination in the aircrew is very important on the battlefield, and the narrow fighter space needs to carry a variety of electronic equipment. The integrated radar communication technology can combine the original independent radar and The integration of the communication system into a comprehensive integrated combat platform can not only meet the combat needs of the new era and new scenarios, but also has important significance for the future generation of fighter jets. This paper conducts an in-depth study on an integrated waveform of OFDM radar communication.
- 25 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 21 (16) , 17410-17418
Cascade Amplification Effect for Mechanical Stimuli Sensors by Designing the Current Path Through Carbon Fiber Beams
Inspired by the tandem structure can be used as an effective approach to improving the performance of optoelectronic devices such as solar cells and organic light emitting diodes, a series of mechanical sensors with high performance were fabricated on a flexible sheet (thickness, less than $300~\mu \text{m}$ ) based on tandem structures. In our designed tandem structure models, the single sensing unit consisting of one single carbon fiber beam presents nonlinear behavior when responding to force stimuli. Thus, the initial resistance and resistance change value of the tandem mechanical sensors could be enhanced by increasing the number of sensing units to lengthen the current path through carbon fiber beams and enable the sensor to respond to subtle force after preloading a large force. Moreover, the tandem mechanical sensors can measure force quantitatively due to the corresponding relationship between the resistance change rate and the loading force. These combined advantages of the tandem mechanical sensors were also demonstrated by the successful application in weighed, softness discrimination and texture discrimination, implying that these mechanical sensors could be used as mechanoreceptors like a finger touching in monitoring daily life sensations.
- 25 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 21 (16) , 17410-17418
Cascade Amplification Effect for Mechanical Stimuli Sensors by Designing the Current Path Through Carbon Fiber Beams
Inspired by the tandem structure can be used as an effective approach to improving the performance of optoelectronic devices such as solar cells and organic light emitting diodes, a series of mechanical sensors with high performance were fabricated on a flexible sheet (thickness, less than $300~\mu \text{m}$ ) based on tandem structures. In our designed tandem structure models, the single sensing unit consisting of one single carbon fiber beam presents nonlinear behavior when responding to force stimuli. Thus, the initial resistance and resistance change value of the tandem mechanical sensors could be enhanced by increasing the number of sensing units to lengthen the current path through carbon fiber beams and enable the sensor to respond to subtle force after preloading a large force. Moreover, the tandem mechanical sensors can measure force quantitatively due to the corresponding relationship between the resistance change rate and the loading force. These combined advantages of the tandem mechanical sensors were also demonstrated by the successful application in weighed, softness discrimination and texture discrimination, implying that these mechanical sensors could be used as mechanoreceptors like a finger touching in monitoring daily life sensations.
- Open Access
- 2 March 2021
- Published by Springer Nature in npj Flexible Electronics
- Vol. 5 (1) , 1-8
Fiber-junction design for directional bending sensors
Flexible sensors in wearable electronics have become increasingly multifunctional due to the development of materials synthesis and structure design. In particular, structural design can not only add capabilities to sensors fabricated from existing available and normal materials, but also offer opportunities for the fabrication of sensors with certain desired functions. Here, we designed a series of fiber-junction structure models, in which two fibers were simply hooked to each other to form a junction on a flexible printed circuit, for fabrication of directional bending sensors. The value and direction of bending angle are related to the change in electronic signal by a theoretical expression, allowing us to employ a simple and practicable method to use available conductive fiber materials to fabricate high-sensitivity, high-resolution and directional bending sensors. In addition, these models are generally applicable, which have broad combination with different conductive fiber, and corresponding bending sensors all possess capability of directional identification. Furthermore, the capability of identifying directional bending was demonstrated by human motion monitoring such as joint bending and muscle contraction.
- 2 March 2021
- Published by Springer Nature in npj Flexible Electronics
- Vol. 5 (1) , 1-8
Open AccessFiber-junction design for directional bending sensors
Flexible sensors in wearable electronics have become increasingly multifunctional due to the development of materials synthesis and structure design. In particular, structural design can not only add capabilities to sensors fabricated from existing available and normal materials, but also offer opportunities for the fabrication of sensors with certain desired functions. Here, we designed a series of fiber-junction structure models, in which two fibers were simply hooked to each other to form a junction on a flexible printed circuit, for fabrication of directional bending sensors. The value and direction of bending angle are related to the change in electronic signal by a theoretical expression, allowing us to employ a simple and practicable method to use available conductive fiber materials to fabricate high-sensitivity, high-resolution and directional bending sensors. In addition, these models are generally applicable, which have broad combination with different conductive fiber, and corresponding bending sensors all possess capability of directional identification. Furthermore, the capability of identifying directional bending was demonstrated by human motion monitoring such as joint bending and muscle contraction.