Keke Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Keke Hu has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Yuan Shen
Tsinghua University
6 shared publications - Bobai Zhao
School of Information Management, Beijing Information Science and Technology University, Beijing, China
2 shared publications - Tianyu Wang
Department of Electronic Engineering and the Beijing National Research Center for Information Science and Technology, Tsinghua University, Beijing, China
2 shared publications Zhihang Li
Department of Electronic Engineering and the Beijing National Research Center for Information Science and Technology, Tsinghua University, Beijing, China
2 shared publications- Hanying Zhao
Division of Information Science and Engineering, KTH Royal Institute of Technology, Stockholm, Sweden
1 shared publication - Jian Wang
Tsinghua University
1 shared publication
Latest Publications
- 7 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (1) , 1455-1468
Tensor Decomposition Based Passive Localization for MIMO-OTFS System in High-Mobility Scenarios
In comparison to the orthogonal frequency division multiplexing (OFDM) signal, orthogonal time frequency space (OTFS) modulation is more suitable for high-mobility localization scenarios, such as autonomous vehicles. This paper proposes a tensor-based algorithmic framework for passive localization in MIMO-OTFS system, where the multipath components (MPCs) are exploited by sparse temporal-Doppler-spatial features of the received channel impulse response. Specifically, we propose a low-rank fourth-order channel tensor to characterize temporal-Doppler-spatial features, leveraging the distinctiveness of tensor decomposition to distinguish coherent multipath signals. This is followed by a sophisticated joint estimation technique. Subsequently, we establish the correlation between Doppler frequency shift (DFS) and target velocity, drawing upon the principles of relativistic Doppler effects in scenarios involving one more receivers existing in the sensing area. Moreover, we derive the Cramér-Rao lower bound (CRLB) to assess the performance of MPC parameter estimation and positioning. Our computational analysis reveals that the algorithm we propose exhibits superior accuracy in parameter estimation compared to cutting-edge methods currently available.
- 7 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (1) , 1455-1468
Tensor Decomposition Based Passive Localization for MIMO-OTFS System in High-Mobility Scenarios
In comparison to the orthogonal frequency division multiplexing (OFDM) signal, orthogonal time frequency space (OTFS) modulation is more suitable for high-mobility localization scenarios, such as autonomous vehicles. This paper proposes a tensor-based algorithmic framework for passive localization in MIMO-OTFS system, where the multipath components (MPCs) are exploited by sparse temporal-Doppler-spatial features of the received channel impulse response. Specifically, we propose a low-rank fourth-order channel tensor to characterize temporal-Doppler-spatial features, leveraging the distinctiveness of tensor decomposition to distinguish coherent multipath signals. This is followed by a sophisticated joint estimation technique. Subsequently, we establish the correlation between Doppler frequency shift (DFS) and target velocity, drawing upon the principles of relativistic Doppler effects in scenarios involving one more receivers existing in the sensing area. Moreover, we derive the Cramér-Rao lower bound (CRLB) to assess the performance of MPC parameter estimation and positioning. Our computational analysis reveals that the algorithm we propose exhibits superior accuracy in parameter estimation compared to cutting-edge methods currently available.
- 17 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 29 (2) , 373-377
A Deep Learning-Based Indoor Positioning Approach Using Channel and Spatial Attention
The emerging B5G and 6G applications have brought forth the need for high-precision indoor localization. However, the complexity of indoor environments poses significant challenges to this goal, particularly due to the presence of non-line-of-sight (NLOS) conditions and multipath effects. This letter proposes an attention-based positioning network (ABPN) that exploits fine-grained features from MIMO channel state information (CSI) by spatial attention to combat the limited receptive field of traditional convolutional neural networks (CNNs) as well as channel attention to discriminate the importance of different wireless channels. Extensive experiments, conducted on two real-world datasets, demonstrate that the proposed ABPN outperforms the popular PirnatEco, AAresCNN, MIMOnet and CLnet with an average localization accuracy improvement of over 50%.
- 17 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 29 (2) , 373-377
A Deep Learning-Based Indoor Positioning Approach Using Channel and Spatial Attention
The emerging B5G and 6G applications have brought forth the need for high-precision indoor localization. However, the complexity of indoor environments poses significant challenges to this goal, particularly due to the presence of non-line-of-sight (NLOS) conditions and multipath effects. This letter proposes an attention-based positioning network (ABPN) that exploits fine-grained features from MIMO channel state information (CSI) by spatial attention to combat the limited receptive field of traditional convolutional neural networks (CNNs) as well as channel attention to discriminate the importance of different wireless channels. Extensive experiments, conducted on two real-world datasets, demonstrate that the proposed ABPN outperforms the popular PirnatEco, AAresCNN, MIMOnet and CLnet with an average localization accuracy improvement of over 50%.
- 19 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 27 (12) , 3215-3219
An Unsupervised Transfer Learning Method for UWB Ranging Error Mitigation
Distance estimation using ultra-wideband transmissions suffers from significant accuracy loss in non-line-of-sight propagation environments. Prevailing machine learning-based error mitigation algorithms are often environment- or device-dependent. This letter proposes an unsupervised transfer learning method based on domain adversarial training and adaptive encoder-decoder, which can retain the ranging accuracy when the environment or the device changes with low data collection workload. Experimental results show that the proposed scheme can achieve a nearly supervised-level error mitigation performance in cross-environment and cross-device applications.
- 19 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 27 (12) , 3215-3219
An Unsupervised Transfer Learning Method for UWB Ranging Error Mitigation
Distance estimation using ultra-wideband transmissions suffers from significant accuracy loss in non-line-of-sight propagation environments. Prevailing machine learning-based error mitigation algorithms are often environment- or device-dependent. This letter proposes an unsupervised transfer learning method based on domain adversarial training and adaptive encoder-decoder, which can retain the ranging accuracy when the environment or the device changes with low data collection workload. Experimental results show that the proposed scheme can achieve a nearly supervised-level error mitigation performance in cross-environment and cross-device applications.
- 22 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 11 (6) , 1225-1228
A Multipath-Aided Localization Method for MIMO-OFDM Systems via Tensor Decomposition
Wi-Fi indoor localization has witnessed an increasing interest, benefiting from its low cost, easy accessibility and wide deployment. However, its applications are often restricted due to harsh multipath propagation in indoor environments. In this letter, we propose a tensor-based localization algorithm that fully exploits the multipath components (MPCs) within the channel state information. We first formulate the location parameter estimation problem as a tensor decomposition problem and ensure the uniqueness by a preprocessing step. Then, a multipath-aided localization method is proposed to achieve high-accuracy localization via fusing time-difference-of-arrival and angle-of-arrival information from all MPCs. Experimental results show that the proposed method can provide a stable sub-meter-level localization performance in multipath environments.
- 22 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 11 (6) , 1225-1228
A Multipath-Aided Localization Method for MIMO-OFDM Systems via Tensor Decomposition
Wi-Fi indoor localization has witnessed an increasing interest, benefiting from its low cost, easy accessibility and wide deployment. However, its applications are often restricted due to harsh multipath propagation in indoor environments. In this letter, we propose a tensor-based localization algorithm that fully exploits the multipath components (MPCs) within the channel state information. We first formulate the location parameter estimation problem as a tensor decomposition problem and ensure the uniqueness by a preprocessing step. Then, a multipath-aided localization method is proposed to achieve high-accuracy localization via fusing time-difference-of-arrival and angle-of-arrival information from all MPCs. Experimental results show that the proposed method can provide a stable sub-meter-level localization performance in multipath environments.
- 23 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 10 (11) , 2543-2546
A Tensor-Based Joint AoA and ToF Estimation Method for Wi-Fi Systems
This letter presents a tensor-based joint AoA and ToF estimation method using the channel state information for Wi-Fi systems. Our method can mitigate the estimation error caused by the signal phase offset and noise interference using linear regression and discrete wavelet transform, respectively. Moreover, the Cramér-Rao lower bound for joint AoA and ToF estimation is derived for performance evaluation. Finally, Wi-Fi measurements are taken in indoor scenarios, and the numerical results show that the proposed method can reduce the estimation errors by more than 20% in comparison with existing algorithms.
- 23 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 10 (11) , 2543-2546
A Tensor-Based Joint AoA and ToF Estimation Method for Wi-Fi Systems
This letter presents a tensor-based joint AoA and ToF estimation method using the channel state information for Wi-Fi systems. Our method can mitigate the estimation error caused by the signal phase offset and noise interference using linear regression and discrete wavelet transform, respectively. Moreover, the Cramér-Rao lower bound for joint AoA and ToF estimation is derived for performance evaluation. Finally, Wi-Fi measurements are taken in indoor scenarios, and the numerical results show that the proposed method can reduce the estimation errors by more than 20% in comparison with existing algorithms.
- 22 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 10 (3) , 688-691
A Semi-Supervised Learning Approach for UWB Ranging Error Mitigation
Non-line-of-sight (NLOS) propagation conditions can severely degrade wireless localization accuracy due to the biases in range measurements. Machine learning methods such as support vector machine (SVM) can mitigate the effect of NLOS biases when sufficient labeled ranging measurements are available. This paper proposes a semi-supervised learning approach for NLOS identification and mitigation, which leverages low-cost unlabeled measurements by self-training to complement only a small portion of labeled ones. Experimental results show that the proposed semi-supervised approach can increase the NLOS identification probability from 90% to 94% and reduce the ranging error by 10% by exploiting the unlabeled measurements.
- 22 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 10 (3) , 688-691
A Semi-Supervised Learning Approach for UWB Ranging Error Mitigation
Non-line-of-sight (NLOS) propagation conditions can severely degrade wireless localization accuracy due to the biases in range measurements. Machine learning methods such as support vector machine (SVM) can mitigate the effect of NLOS biases when sufficient labeled ranging measurements are available. This paper proposes a semi-supervised learning approach for NLOS identification and mitigation, which leverages low-cost unlabeled measurements by self-training to complement only a small portion of labeled ones. Experimental results show that the proposed semi-supervised approach can increase the NLOS identification probability from 90% to 94% and reduce the ranging error by 10% by exploiting the unlabeled measurements.
- Open Access
- 2 December 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (68) , 39622-39630
Dendritic fibrous nano-silica & titania (DFNST) spheres as novel cataluminescence sensing materials for the detection of diethyl ether
Selective and controllable cataluminescence (CTL) sensors for volatile organic compounds (VOCs) are significant for chemical safety, environmental monitoring, health effects on human beings, and so forth. Most of the exploited CTL-based sensors suffer relatively low response and poor selectivity because of their high sensitivities to interferential substances. In this investigation, dendritic fibrous nano-silica & titania (DFNST) spheres have been synthesized as novel sensing materials and the corresponding DFNST-based CTL sensor has been fabricated to detect diethyl ether with high selectivity via a method of utilizing one 440 nm bandpass filter. The as-prepared DFNST hybrids not only keep the excellent dendritic fibrous morphology but also bear ca. 21 wt% catalytic titanium oxide of anatase crystalline structure. The DFNST-based sensor exhibits extremely strong CTL emission at 440 nm toward diethyl ether against other VOCs like acetone, ethyl acetate, butanol, and so forth. The high response can be attributed to the unique architectural texture of DFNST. Under the optimum parameters, ether could be easily detected in a wide range from 2.0 to 40.0 mM with a fine detection limit of 1.55 mM (S/N = 3). Furthermore, the working life of this CTL sensor is satisfactory with outstanding stability and durability, far from damaging the morphology and activity of the DFNST sensing material. In conclusion, it is expected that this novel sensing material, the relevant CTL sensor, and the approach of employing the bandpass filter will be significant for the detection of diethyl ether in actual applications.
- 2 December 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (68) , 39622-39630
Open AccessDendritic fibrous nano-silica & titania (DFNST) spheres as novel cataluminescence sensing materials for the detection of diethyl ether
Selective and controllable cataluminescence (CTL) sensors for volatile organic compounds (VOCs) are significant for chemical safety, environmental monitoring, health effects on human beings, and so forth. Most of the exploited CTL-based sensors suffer relatively low response and poor selectivity because of their high sensitivities to interferential substances. In this investigation, dendritic fibrous nano-silica & titania (DFNST) spheres have been synthesized as novel sensing materials and the corresponding DFNST-based CTL sensor has been fabricated to detect diethyl ether with high selectivity via a method of utilizing one 440 nm bandpass filter. The as-prepared DFNST hybrids not only keep the excellent dendritic fibrous morphology but also bear ca. 21 wt% catalytic titanium oxide of anatase crystalline structure. The DFNST-based sensor exhibits extremely strong CTL emission at 440 nm toward diethyl ether against other VOCs like acetone, ethyl acetate, butanol, and so forth. The high response can be attributed to the unique architectural texture of DFNST. Under the optimum parameters, ether could be easily detected in a wide range from 2.0 to 40.0 mM with a fine detection limit of 1.55 mM (S/N = 3). Furthermore, the working life of this CTL sensor is satisfactory with outstanding stability and durability, far from damaging the morphology and activity of the DFNST sensing material. In conclusion, it is expected that this novel sensing material, the relevant CTL sensor, and the approach of employing the bandpass filter will be significant for the detection of diethyl ether in actual applications.