Iveta Ruz̆ic̆ková
Iveta Ruz̆ic̆ková has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Jiří Wanner
Institute of Chemical Technology Prague, Technická 5, CZ-16628 Prague 6, Czech Republic
2 shared publications Andrea Benáková
Prague Institute of Chemical Technology, Department of Water Technology and Environmental Engineering, Technická 5, CZ-16628 Prague 6, Czech Republic
1 shared publication- Dominik Matýsek
Ústav technologie vody a prostředí VŠCHT Praha
1 shared publication Jana Paraniaková
Prague Institute of Chemical Technology, Department of Water Technology and Environmental Engineering, Technicka 5, CZ-166 28 Praha 6, Czech Republic
1 shared publicationJir̆í Wanner
Prague Institute of Chemical Technology, Department of Water Technology and Environmental Engineering, Technická 5, CZ-16628 Prague 6, Czech Republic
1 shared publicationK. Hladikova
Prague Institute of Chemical Technology, Department of Water Technology and Environmental Engineering, Czech Republic
1 shared publication
Latest Publications
- Open Access
- 16 July 2024
- Published by University of Chemistry and Technology - Faculty of Environmental Technology in Entecho
- No. 1,p. 1-7
Výskyt bakterií Tetrasphaera spp. v aktivovaném kalu
Fosfor lze z odpadní vody odstraňovat metodou chemického srážení, která je v České republice obvykle upřednostňována, anebo biologicky pomocí polyfosfát-akumulujících organismů. Do skupiny těchto organismů patří i rod bakterií Tetrasphaera, jejichž míra rozšíření na českých čistírnách není dosud známa. Se znalostí zastoupení významných polyfosfát-akumulujících organismů by mohlo být možné na čistírnách na našem území nastolit vhodné podmínky pro zvýšené biologické odstraňování fosforu. Práce je tedy věnována zejména monitoringu výskytu bakterií rodu Tetrasphaera na různých čistírnách odpadních vod v České republice pomocí metody fluorescenční in-situ hybridizace za využití pěti oligonukleotidových specifických sond a následné obrazové analýzy. Získané výsledky jsou dány do kontextu se znalostí podoby technologické linky příslušné čistírny odpadních vod. Tyto informace budou v pozdějším výzkumu posouzeny s ohledem na možné zapojení biologického odstraňování fosforu na českých čistírnách.
- 16 July 2024
- Published by University of Chemistry and Technology - Faculty of Environmental Technology in Entecho
- No. 1,p. 1-7
Open AccessVýskyt bakterií Tetrasphaera spp. v aktivovaném kalu
Fosfor lze z odpadní vody odstraňovat metodou chemického srážení, která je v České republice obvykle upřednostňována, anebo biologicky pomocí polyfosfát-akumulujících organismů. Do skupiny těchto organismů patří i rod bakterií Tetrasphaera, jejichž míra rozšíření na českých čistírnách není dosud známa. Se znalostí zastoupení významných polyfosfát-akumulujících organismů by mohlo být možné na čistírnách na našem území nastolit vhodné podmínky pro zvýšené biologické odstraňování fosforu. Práce je tedy věnována zejména monitoringu výskytu bakterií rodu Tetrasphaera na různých čistírnách odpadních vod v České republice pomocí metody fluorescenční in-situ hybridizace za využití pěti oligonukleotidových specifických sond a následné obrazové analýzy. Získané výsledky jsou dány do kontextu se znalostí podoby technologické linky příslušné čistírny odpadních vod. Tyto informace budou v pozdějším výzkumu posouzeny s ohledem na možné zapojení biologického odstraňování fosforu na českých čistírnách.
- 18 July 2005
- Published by Wiley in Acta Hydrochimica et Hydrobiologica
- Vol. 33 (3) , 266-269
Effect of Coagulant Dosing on Physicochemical and Microbiological Characteristics of Activated Sludge and Foam Formation
- 18 July 2005
- Published by Wiley in Acta Hydrochimica et Hydrobiologica
- Vol. 33 (3) , 266-269
Effect of Coagulant Dosing on Physicochemical and Microbiological Characteristics of Activated Sludge and Foam Formation
- 18 July 2005
- Published by Wiley in Acta Hydrochimica et Hydrobiologica
- Vol. 33 (3) , 262-265
Biological Foam Control by Chemical Additives Dosing - Part II: Biological and Physico-chemical Aspects
- 18 July 2005
- Published by Wiley in Acta Hydrochimica et Hydrobiologica
- Vol. 33 (3) , 262-265
Biological Foam Control by Chemical Additives Dosing - Part II: Biological and Physico-chemical Aspects
- 1 July 2002
- Published by IWA Publishing in Water Science & Technology
- Vol. 46 (1-2) , 525-528
An investigation into studying of the activated sludge foaming potential by using physicochemical parameters
This paper examines how the physicochemical characteristics of the solids are related to foam formation and describes how the foaming potential of full-scale plants can be assessed. The relations among activated sludge and biological foam hydrophobicity, scum index, aeration tank cover and filamentous population are evaluated. Individual parameter comparison reveals the scumming intensity can be estimated only on the assumption that foams is already established. None of the above mentioned characteristics can be reliably used to predict the foaming episodes at wastewater treatment plants.
- 1 July 2002
- Published by IWA Publishing in Water Science & Technology
- Vol. 46 (1-2) , 525-528
An investigation into studying of the activated sludge foaming potential by using physicochemical parameters
This paper examines how the physicochemical characteristics of the solids are related to foam formation and describes how the foaming potential of full-scale plants can be assessed. The relations among activated sludge and biological foam hydrophobicity, scum index, aeration tank cover and filamentous population are evaluated. Individual parameter comparison reveals the scumming intensity can be estimated only on the assumption that foams is already established. None of the above mentioned characteristics can be reliably used to predict the foaming episodes at wastewater treatment plants.
- 1 February 1998
- Published by IWA Publishing in Water Science & Technology
- Vol. 37 (4-5) , 271-279
A national survey of activated sludge separation problems in the Czech Republic: filaments, floc characteristics and activated sludge metabolic properties
The extent of activated sludge separation problems associated with excessive growth of filamentous microorganisms has increased recently in the Czech Republic. Most of the activated sludge plants in the country were contacted by mail with a questionnaire, the aim of which was to obtain the basic technological data on the plants and on the nature and intensity of activated sludge separation problems. Selected activated sludge plants were visited at different periods of the year and samples of activated sludge mixed liquor and foam were collected for microscopic examination and kinetic batch tests. It was found that good settling properties were associated more with good quality activated sludge flocs than with the absence of filaments. On the other hand, a very high abundance of filaments always resulted in bulking or foaming. The most common filamentous microorganisms in activated sludge mixed liquors were M. parvicella, N. limicola and Types 0092, 0041 and 0803 while the foams were mostly dominated by M. parvicella, NALOs (GALOs) and N. limicola. Seasonal shifts in filamentous population diversity were also observed. M. parvicella, Type 0092, N. limicola, Type 0803 and Type 0041 were dominant in both conventional and biological nutrient removal activated sludge plants whereas the other Eikelboom9s types of filaments dominated mostly in conventional activated sludge plants. The ability of foams to denitrify depended on the dominating filamentous microorganism and type of substrate.
- 1 February 1998
- Published by IWA Publishing in Water Science & Technology
- Vol. 37 (4-5) , 271-279
A national survey of activated sludge separation problems in the Czech Republic: filaments, floc characteristics and activated sludge metabolic properties
The extent of activated sludge separation problems associated with excessive growth of filamentous microorganisms has increased recently in the Czech Republic. Most of the activated sludge plants in the country were contacted by mail with a questionnaire, the aim of which was to obtain the basic technological data on the plants and on the nature and intensity of activated sludge separation problems. Selected activated sludge plants were visited at different periods of the year and samples of activated sludge mixed liquor and foam were collected for microscopic examination and kinetic batch tests. It was found that good settling properties were associated more with good quality activated sludge flocs than with the absence of filaments. On the other hand, a very high abundance of filaments always resulted in bulking or foaming. The most common filamentous microorganisms in activated sludge mixed liquors were M. parvicella, N. limicola and Types 0092, 0041 and 0803 while the foams were mostly dominated by M. parvicella, NALOs (GALOs) and N. limicola. Seasonal shifts in filamentous population diversity were also observed. M. parvicella, Type 0092, N. limicola, Type 0803 and Type 0041 were dominant in both conventional and biological nutrient removal activated sludge plants whereas the other Eikelboom9s types of filaments dominated mostly in conventional activated sludge plants. The ability of foams to denitrify depended on the dominating filamentous microorganism and type of substrate.