MAMike Ajieh

Mike Ajieh

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Mike Ajieh has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    KINETIC AND THERMODYNAMIC STUDIES OF THE DEVOLATILIZATION OF PUMPKIN PODS (Telfairia occidentalis Hook F.) WASTES

    by Nneka R. Agbale, Mike Ajieh, Gamaliel O. Atonuje, Kingsley O. Adiotomre, Solomon N. Eze, David Atugba, Izuchukwu F. Okafor

    Waste accruing from Pumpkin pod (Telfairia occidentalis Hook F.) was exposed to pyrolysis at varying temperatures namely; 350oC, 400oC, 500oC and 600oC and the heating rates were monitored at 0.17, 0.33 and 0.5 oC/sec. The biochar were then characterized in terms of yield, proximate composition and the process kinetics evaluated using Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS) and Starink models. The models also showed the behaviour of the biochar with respect to to change in temperature. Proximate analysis of the biochar shows that it contains 11.77% moisture, 2.64%ash 12.50% fixed carbon and 73.10% volatile matter with a heating value of 17.91 MJ/kg. Furthermore, at 10oC/min, 20oC/min and 30/min, the biochar yield (wt%) decreased from 63.1 to 42.13, 59.87 to 38.33 and 51.91 to 32.12 respectively as pyrolysis temperature increased from 350oC to 600oC. FWO, KAS and Starink models, show high R2 squared values greater than 0.9400, which indicate a good fit of the models. The mean activation energy (EA) obtained for FWO, KAS and Starink models were 157.68kJ/mol, 157.23kJ/mol and 157.38kJ/mol. The thermodynamics results for FWO, KAS and Starink models show an average enthalpy of 152.30kJ/mol, 157.44kJ/mol and 155.14KJ/mol, average free energy of 112.89kJ/mol, 122.77kJ/mol and 116.73kJ/mol and low average entropy of 0.077kJ/mol, 0.075kJ/mol and 0.073kJ/mol. The optimization of the thermal conversion of pumpkin pod for energy and sequestration purposes is provided by the theoretical analysis of this study.

  • Open Access

    Perspective Chapter: Unlocking Energy and Natural Resources for Sustainable Development in Nigeria – The Role of Energy Research Centers

    by Emmanuel Ogbomida, Abdullahi Mustapha, Chukwudi Emeribe, Lawrence Ezemonye, Mike Ajieh

    Amid global challenges like climate change and resource depletion, Nigeria’s pursuit of low-carbon energy resources teeters on the brink. Nigeria grapples with the delicate balance between economic growth, environmental stewardship, and energy security. Energy and natural resources are crucial to modern society, playing a pivotal role in economic development, environmental sustainability, and overall human well-being. In response to these challenges, the national energy research centers have emerged as vital institutions that can contribute to the development of sustainable innovations that would catalyze the transition to a low-carbon economy. Unlocking these potential hinges on cutting-edge research tailored to drive innovation, influence policy, and promote responsible resource management. Investing in research holds the potential to facilitate Nigeria’s transition to a low-carbon economy. These research centers can act as catalysts for unleashing the full potential of Nigeria’s energy and natural resources contributing to global efforts to combat climate change while ensuring economic growth and energy security for the populations. Achieving these objectives requires an increased investment in avant-garde research, which would propel Nigeria toward a future characterized by sustainability and prosperity and paving the way for a resilient and environmentally conscious path to long-term development.


  • Open Access

    Analytical assessment of knowledge, attitude and practices (KAP) of waste management practices to optimize energy and food nexus: A case study of Oleh, Isoko South LGA, Delta State, Nigeria

    by U. Ajieh M., T. Ogbomida E., D. Uhunamure N., N. Agbale R., I. Ajieh G., Ekperi R., I. Owamah H., F. Okafor I.

    The circular life cycle of waste management, designed for waste-to-energy, can substantially contribute to efficient waste management, a precursor for sustainable energy and food production. This study evaluates knowledge, attitudes, and practices (KAP) related to waste management and identify its potential for improving energy and food production. Surveys, interviews, and data analysis were employed to investigate current waste management scenarios, socio-cultural perceptions, and policy frameworks in Oleh, Nigeria. Factor analysis was used to reduce the multitude of attitudinal variables collected during surveys and interviews. The results exposed gaps in waste management perception, principles, policy implementation, and waste-to-energy conversion. SWOT analysis was conducted to validate identified factors, highlighting significant strengths, weaknesses, opportunities, and threats associated with current waste management practices. To enhance energy generation and food security, a waste management model was proposed with recommendations for pathways promoting policy enhancements and community engagement strategies to foster a more efficient energy and food nexus. Key words: Waste management, factor analysis, social attitudes, community engagement, public perception. The circular life cycle of waste management, designed for waste-to-energy, can substantially contribute to efficient waste management, a precursor for sustainable energy and food production. This study evaluates knowledge, attitudes, and practices (KAP) related to waste management and identify its potential for improving energy and food production. Surveys, interviews, and data analysis were employed to investigate current waste management scenarios, socio-cultural perceptions, and policy frameworks in Oleh, Nigeria. Factor analysis was used to reduce the multitude of attitudinal variables collected during surveys and interviews. The results exposed gaps in waste management perception, principles, policy implementation, and waste-to-energy conversion. SWOT analysis was conducted to validate identified factors, highlighting significant strengths, weaknesses, opportunities, and threats associated with current waste management practices. To enhance energy generation and food security, a waste management model was proposed with recommendations for pathways promoting policy enhancements and community engagement strategies to foster a more efficient energy and food nexus. Key words: Waste management, factor analysis, social attitudes, community engagement, public perception.


  • Open Access

    Evaluation of Polyurethane Production Quality using Statistical Process Control Approach

    by Anthony Muobike, Mike Ajieh, Nneka R. Agbale, Lawrence C. Edomwonyi-Otu

    Manufacturing processes in the recent times prioritizes competitiveness and continuous improvement. This study examined production data from an indigenous polyurethane firm to monitor controllable variables (i.e., density, tensile strength, hardness, compression and elongation) for quality and improve outcomes. Data was subjected to statistical process control (SPC) using control chart methods of analysis. In addition to raising an alarm when a process deviates from control, control charts are crucial for determining internal and natural control limits. An analysis of the data revealed that at the beginning of production, 35DC (27084), 22DC (26543), 18DC (21805), and 16DC (20666) consumed more production material than 14DC (3833). According to the mean value, the majority of the production material is either consumed during the early stages of production or preserved or minimized during the later stages of production. To counteract this irregularity, it is important to pay greater attention to identifying the material that suffocates other production components during the first stages of production. Therefore, for better health outcomes in terms of ergonomics and acceptability and/or comfort (the feel-good factor) during usage, an ideal blend of polyurethane under controlled manufacture is needed.

  • Assessment of Anaerobic Digestate Amended with Wood Ash and Green Vegetable Matter and Impacts on Microbial Growth

    by Ebuwa S. Isagba, Mike U. Ajieh, Cyprian E. Oshoma, Andrew Amenaghawon, Abraham Ogofure, Victoria Obatusin, Ifeyinwa S. Obuekwe, Isioma Tongo, Newton Ihoeghian, Valerie I. O. Edosa, et al.


  • Effect of excess viscosifier and fluid loss control additive on the rheological characteristics of water-based drilling fluid

    by Mike Uche Ajieh, Nosakhare Andrew Amenaghawon, Kesiena Owebor, Oghenero Henry Orugba, Esua Bassey Bassey

    Water-soluble polymers are used to improve drilling operations to ensure that oil and gas wells are drilled in less time and completed with minimized formation damage. However, excessive utilization of these polymers additives may have implication on the drilling outcomes. In this work, drilling fluids comprising of different compositions of polyanionic cellulose (PAC), and starch; and a constant amount of bentonite were formulated to examine the effects of excessive use of each additive or their combinations in a water-based drilling fluid (WBDF). The fluid properties were further investigated at low pressure and low temperature (LPLT) as well as high pressure and high temperature (HPHT). The results suggest that the viscosities of the fluid are not only dependent on the shear rate, shear stress, and composition but also on the temperature and pressure. Model plots of shear stress (Pa) against shear rate (s−1) using the Power law, Bingham plastic and Herschel-Bulley shows that all composition have low viscosity and low yield point. Increasing the amount of additive increases, the equivalent circulating density (ECD) which may increase differential sticking and consequent formation damage.


  • Open Access

    Assessment of Aerobic Microbial Activity of Ash and Vegetable-Amended Digestate

    by Ebuwa S. Isagba, Mike U. Ajieh, Cyprian E Oshoma, Andrew Amenaghawon, Abraham Ogofure, Victoria Obatusin, Ifeyinwa Obuekwe, Isioma Tongo, Newton Ihoeghian, Valerie I.O. Edosa, et al.

    Anaerobic digestion (AD) of organic wastes results in biogas and digestate production. The digestate from AD may fall short of vital nutrients required for an optimal plant growth due to feedstock quality. Thus, digestate amendment with biomass and aerobic metabolic activities becomes an essential process for nutrient enhancement. This study aimed to investigate the microbial quality of digestate amended with wood ash, and vegetable matter during treatment. Digestate from cattle rumen (CR), food waste (FW), fruit waste (FRW); and their combinations were obtained. The various digestates were amended with wood ash, vegetable matter and a blend of both. Amendment was carried out for a duration of 5 weeks and samples were analyzed weekly. Enumeration and identification of bacteria and fungi were carried on culture media. The rhizobacterial potential of the identified bacterial isolates was also investigated using standard procedures. The results showed high bacteria and fungal loading in the amended digestate from the first to the fourth week. Comparatively, cattle rumen and food waste digestate, amended with vegetable were highly significant with mean value of 0.8 and 0.6 respectively. The identified bacterial isolates, Bacillus subtilis, Salmonella sp, Pseudomonas sp, Proteus sp, Enterobacter sp, Chromobacterium sp Bacillus spp. and Escherichia coli were found to be involved in solubilization of phosphate, nitrogen fixation, ammonia production and induction of indole acetic acid. Specifically, digestate amended with vegetable waste improved the soil nutrient compared to the wood ash in both bacterial and fungal load. Hence, digestate amendment is crucial for nutrient enhancement, increase in carbon level and overall, improves soil nutrient.