Zhuo Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhuo Chen has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Xiaoyan Huang
College of Electrical Engineering, Zhejiang University, Hangzhou, China
16 shared publications - Zhaokai Li
Department of Energy, Politecnico di Milano, Milan, Italy
13 shared publications - Ang Liu
Zhejiang Provincial Key Laboratory of Electrical Machine Systems, College of Electrical Engineering, Zhejiang University, Hangzhou, China
7 shared publications - Ye Ma
College of Electrical Engineering, Zhejiang Provincial Key Laboratory of Electrical Machine Systems, Zhejiang University, Hangzhou, China
5 shared publications - Yelong Yu
Zhejiang Provincial Key Laboratory of Electrical Machine Systems, College of Electrical Engineering, Zhejiang University, Hangzhou, China
5 shared publications - Huanran Wang
College of Electrical Engineering, Zhejiang Provincial Key Laboratory of Electrical Machine Systems, Zhejiang University, Hangzhou, China
4 shared publications
Latest Publications
- 17 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. PP (08858969) , 1-10
Low Copper Loss High-Resistance Connection Fault Tolerant Method in Five-phase PMSM with Current and Voltage Reconfiguration
The high-resistance connection (HRC) fault in the five-phase permanent magnet synchronous motor (PMSM) leads to increased copper losses and reduced efficiency due to impedance imbalance. The impedance model under HRC fault is incorporated into the proposed fault-tolerant control method. A current and voltage reconfiguration is also adopted with the constraint of minimizing copper loss (MCL). Additionally, the maximization of torque output range with low copper loss (MTMCL) constraint is also proposed for more torque output capability. Combined with the above two constraints and proposed fault tolerant control method, a fault tolerant coefficient switching strategy following electromagnetic torque is also summarized for minimization copper loss without overheating. The experimental results demonstrate that the proposed control method achieves a significant reduction in copper loss compared to original method.
- 17 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. PP (08858969) , 1-10
Low Copper Loss High-Resistance Connection Fault Tolerant Method in Five-phase PMSM with Current and Voltage Reconfiguration
The high-resistance connection (HRC) fault in the five-phase permanent magnet synchronous motor (PMSM) leads to increased copper losses and reduced efficiency due to impedance imbalance. The impedance model under HRC fault is incorporated into the proposed fault-tolerant control method. A current and voltage reconfiguration is also adopted with the constraint of minimizing copper loss (MCL). Additionally, the maximization of torque output range with low copper loss (MTMCL) constraint is also proposed for more torque output capability. Combined with the above two constraints and proposed fault tolerant control method, a fault tolerant coefficient switching strategy following electromagnetic torque is also summarized for minimization copper loss without overheating. The experimental results demonstrate that the proposed control method achieves a significant reduction in copper loss compared to original method.
- Open Access
- 1 January 2026
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 20 (1)
A Fast Motor Design Method Using Gear Ratio Scaling Factor for High‐Efficiency Electric Motorcycle Drives
To achieve high power density of the electric drives for motorcycles, the speed of the electric motor is normally increased. Gear reducers are therefore typically employed to amplify torque. For a given power rating, the gear reduction ratio significantly impacts not only the power density but also the efficiency under various operating conditions. An analytical motor model based on the gear ratio scaling factor is therefore derived and the fast design method for optimising motor efficiency using this factor is proposed consequently. The experimental testing results are demonstrated to verify the proposed approach.
- 1 January 2026
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 20 (1)
Open AccessA Fast Motor Design Method Using Gear Ratio Scaling Factor for High‐Efficiency Electric Motorcycle Drives
To achieve high power density of the electric drives for motorcycles, the speed of the electric motor is normally increased. Gear reducers are therefore typically employed to amplify torque. For a given power rating, the gear reduction ratio significantly impacts not only the power density but also the efficiency under various operating conditions. An analytical motor model based on the gear ratio scaling factor is therefore derived and the fast design method for optimising motor efficiency using this factor is proposed consequently. The experimental testing results are demonstrated to verify the proposed approach.
- 7 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (4) , 6434-6443
A Double-Phase Open-Circuit Fault Tolerant Control Method for Five-Phase PMSM With Zero Sequence Voltage Compensation
Five-phase machines have gained increasing attention due to their fault-tolerant characteristics. This paper proposes a fault-tolerant control method in a five-phase surface-mounted permanent magnet synchronous machine (PMSM) for an adjacent and non-adjacent double-phase open-circuit fault. The proposed method not only considers the current reconfiguration for double-phase open-circuit fault, but also thoroughly analyzes the variation of neutral point voltage and proposes voltage reconfiguration method. Based on the derived remaining phase currents, the derating factors under double-phase open-circuit faults are calculated. The torque fluctuation in the proposed fault tolerant method is nearly identical to that observed during the healthy stage. Additionally, after using the voltage reconfiguration and optimal PR controller configuration, the phase current distortion and computational time are reduced.
- 7 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (4) , 6434-6443
A Double-Phase Open-Circuit Fault Tolerant Control Method for Five-Phase PMSM With Zero Sequence Voltage Compensation
Five-phase machines have gained increasing attention due to their fault-tolerant characteristics. This paper proposes a fault-tolerant control method in a five-phase surface-mounted permanent magnet synchronous machine (PMSM) for an adjacent and non-adjacent double-phase open-circuit fault. The proposed method not only considers the current reconfiguration for double-phase open-circuit fault, but also thoroughly analyzes the variation of neutral point voltage and proposes voltage reconfiguration method. Based on the derived remaining phase currents, the derating factors under double-phase open-circuit faults are calculated. The torque fluctuation in the proposed fault tolerant method is nearly identical to that observed during the healthy stage. Additionally, after using the voltage reconfiguration and optimal PR controller configuration, the phase current distortion and computational time are reduced.
- 3 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 60 (9) , 1-7
Design and Quantitative Analysis of Asymmetric Flux Reversal Permanent Magnet Linear Machine With Reduced Leakage Flux
This article introduces an asymmetric flux reversal permanent magnet linear machine (AFR-PMLM) designed to minimize the leakage flux. By employing asymmetric Halbach PM array, it effectively generates and fully exploits the second-order harmonic magnetomotive force (MMF), leading to substantial improvements in both thrust force density and power factor compared to conventional FR-PMLM. First, the machine topology and operation principle are introduced. Subsequently, the thrust force generation mechanism under multi MMFs is analytically calculated based on MMF-permeance model. Furthermore, various electromagnetic performances are thoroughly illustrated and comprehensively studied. It reveals that the proposed AFR-PMLM with Halbach PM array has the capability to provide 12.8% and 55.4% higher average force than that in AFR-PMLM with conventional asymmetric PM excitation and conventional FR-PMLM, respectively. Additionally, it achieves a power factor exceeding 0.77 under a current density of 6 A/mm2, representing a notable improvement of 36.8% compared to conventional FR-PMLM with symmetric PM excitation. Compared with conventional PMLM, it can provide nearly 72.1% of the thrust force density while consuming only 1/81 of the PMs over a 10 m distance.
- 3 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 60 (9) , 1-7
Design and Quantitative Analysis of Asymmetric Flux Reversal Permanent Magnet Linear Machine With Reduced Leakage Flux
This article introduces an asymmetric flux reversal permanent magnet linear machine (AFR-PMLM) designed to minimize the leakage flux. By employing asymmetric Halbach PM array, it effectively generates and fully exploits the second-order harmonic magnetomotive force (MMF), leading to substantial improvements in both thrust force density and power factor compared to conventional FR-PMLM. First, the machine topology and operation principle are introduced. Subsequently, the thrust force generation mechanism under multi MMFs is analytically calculated based on MMF-permeance model. Furthermore, various electromagnetic performances are thoroughly illustrated and comprehensively studied. It reveals that the proposed AFR-PMLM with Halbach PM array has the capability to provide 12.8% and 55.4% higher average force than that in AFR-PMLM with conventional asymmetric PM excitation and conventional FR-PMLM, respectively. Additionally, it achieves a power factor exceeding 0.77 under a current density of 6 A/mm2, representing a notable improvement of 36.8% compared to conventional FR-PMLM with symmetric PM excitation. Compared with conventional PMLM, it can provide nearly 72.1% of the thrust force density while consuming only 1/81 of the PMs over a 10 m distance.
- 3 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 60 (3) , 1-5
Nonlinear Analytical Model-Embedded Optimal Design for ER-PMSM
This paper proposed a nonlinear analytical model-embedded optimal design procedure for permanent-magnet synchronous motors with an external rotor. Combined with the winding inductance calculation, a refined magnetic circuit is proposed for the analytical prediction of the electromagnetic performance. The stator nonlinearity, which is significant in torque prediction, is considered by using the conception of saturation current. Then, ant colony algorithm is employed for the multi-objective optimization for the great potential in global exploring. Finally, optimal design parameters are selected from the Pareto front. The effectiveness of the proposed optimization design method is verified by finite-element analysis and experimental results of the manufactured prototype.
- 3 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 60 (3) , 1-5
Nonlinear Analytical Model-Embedded Optimal Design for ER-PMSM
This paper proposed a nonlinear analytical model-embedded optimal design procedure for permanent-magnet synchronous motors with an external rotor. Combined with the winding inductance calculation, a refined magnetic circuit is proposed for the analytical prediction of the electromagnetic performance. The stator nonlinearity, which is significant in torque prediction, is considered by using the conception of saturation current. Then, ant colony algorithm is employed for the multi-objective optimization for the great potential in global exploring. Finally, optimal design parameters are selected from the Pareto front. The effectiveness of the proposed optimization design method is verified by finite-element analysis and experimental results of the manufactured prototype.
- Open Access
- 1 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (2) , 3529-3537
Analytical Analysis of Quasi-Halbach Array Permanent-Magnet Motors Based on Field Separation Theory
This paper proposes the field separation theory for predicting the magnetic field of a quasi-Halbach array permanent-magnet motor considering the magnetization pattern and iron saturation. According to the proposed method, the air-gap field consists of a permanent-magnet field, winding current field, and equivalent saturation field. The equivalent permanent-magnet currents replacing the Halbach array with radial or parallel magnetization are introduced to obtain the linear analytical air-gap field of the permanent magnets. The winding current field relating to the slot shape and air-gap length can be directly determined using the linear analytical model. The equivalent saturation field is derived from the combination of the linear analytical model in the air gap and the magnetic circuit model in the iron region. The finite-element analysis of an 8-pole/9-slot Halbach array permanent-magnet motor and its prototype experiments are carried out to verify the effectiveness of the field separation theory, which is then used to analyze the harmonic magnetic field of Halbach array permanent-magnet motors to further improve the electromagnetic torque estimation.
- 1 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (2) , 3529-3537
Open AccessAnalytical Analysis of Quasi-Halbach Array Permanent-Magnet Motors Based on Field Separation Theory
This paper proposes the field separation theory for predicting the magnetic field of a quasi-Halbach array permanent-magnet motor considering the magnetization pattern and iron saturation. According to the proposed method, the air-gap field consists of a permanent-magnet field, winding current field, and equivalent saturation field. The equivalent permanent-magnet currents replacing the Halbach array with radial or parallel magnetization are introduced to obtain the linear analytical air-gap field of the permanent magnets. The winding current field relating to the slot shape and air-gap length can be directly determined using the linear analytical model. The equivalent saturation field is derived from the combination of the linear analytical model in the air gap and the magnetic circuit model in the iron region. The finite-element analysis of an 8-pole/9-slot Halbach array permanent-magnet motor and its prototype experiments are carried out to verify the effectiveness of the field separation theory, which is then used to analyze the harmonic magnetic field of Halbach array permanent-magnet motors to further improve the electromagnetic torque estimation.
- Open Access
- 27 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (1) , 1388-1397
Hybrid Analytical Model for Predicting the Electromagnetic Losses in Surface-Mounted Permanent-Magnet Motors
This paper presents a comprehensive method to predict the electromagnetic losses in surface-mounted permanent-magnet motors based on a hybrid analytical model. Hybrid analytical model will significantly improve the calculation speed compared with finite-element method while keeping great accuracy, making it a competitive alternative for the analysis and optimization of permanent-magnet motors. As the accurate field distribution is the bias of electromagnetic losses prediction, the magnet loss, sleeve loss, and copper loss can all be accurately obtained from their vector potential distribution using hybrid analytical model with small computational burden. As for iron loss, the improved Jiles-Atherton model is proposed to build the relationship between the loss and the magnetic field in the iron region from the perspective of energy conversion. The predictions of magnet loss, sleeve loss, and copper loss using hybrid analytical model agree well with the finite-element method. The experiment on surface-mounted permanent-magnet prototype demonstrates the high accuracy of iron loss calculation using the combination of the improved Jiles-Atherton model and hybrid analytical model.
- 27 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (1) , 1388-1397
Open AccessHybrid Analytical Model for Predicting the Electromagnetic Losses in Surface-Mounted Permanent-Magnet Motors
This paper presents a comprehensive method to predict the electromagnetic losses in surface-mounted permanent-magnet motors based on a hybrid analytical model. Hybrid analytical model will significantly improve the calculation speed compared with finite-element method while keeping great accuracy, making it a competitive alternative for the analysis and optimization of permanent-magnet motors. As the accurate field distribution is the bias of electromagnetic losses prediction, the magnet loss, sleeve loss, and copper loss can all be accurately obtained from their vector potential distribution using hybrid analytical model with small computational burden. As for iron loss, the improved Jiles-Atherton model is proposed to build the relationship between the loss and the magnetic field in the iron region from the perspective of energy conversion. The predictions of magnet loss, sleeve loss, and copper loss using hybrid analytical model agree well with the finite-element method. The experiment on surface-mounted permanent-magnet prototype demonstrates the high accuracy of iron loss calculation using the combination of the improved Jiles-Atherton model and hybrid analytical model.
- 7 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (1) , 2264-2276
Reliability-Oriented Multiobjective Optimization of Electrical Machines Considering Insulation Thermal Lifetime Prediction
With the trend toward transportation electrification, the power density of electrical machines faces ever-increasing requirement owing to the stringent limit of weight, especially for aerospace applications. Conventionally, the reliability of electrical machines in such safety-critical application is guaranteed by considerable safety margins, i.e., the over-engineering approach, which prevents electrical machines from reaching higher power densities and leads to a design conflict. This paper proposes a reliability-oriented design approach for low-voltage electrical machines by integrating model-based lifetime prediction into a multi-objective optimization process. Accelerated thermal degradation tests are carried out on mainwall insulation and turn insulation, then the thermal degradation model is built to predict the lifetimes, accordingly. Thermal lifetime models are developed at several lifetime percentiles for both continuous duty and variable duty applications. Finally, a feasible reliability-oriented multi-objective optimization platform is established, based on which a study-case electrical machine for aerospace application is designed and optimized. The prototype is manufactured to verify the optimized performances.
- 7 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (1) , 2264-2276
Reliability-Oriented Multiobjective Optimization of Electrical Machines Considering Insulation Thermal Lifetime Prediction
With the trend toward transportation electrification, the power density of electrical machines faces ever-increasing requirement owing to the stringent limit of weight, especially for aerospace applications. Conventionally, the reliability of electrical machines in such safety-critical application is guaranteed by considerable safety margins, i.e., the over-engineering approach, which prevents electrical machines from reaching higher power densities and leads to a design conflict. This paper proposes a reliability-oriented design approach for low-voltage electrical machines by integrating model-based lifetime prediction into a multi-objective optimization process. Accelerated thermal degradation tests are carried out on mainwall insulation and turn insulation, then the thermal degradation model is built to predict the lifetimes, accordingly. Thermal lifetime models are developed at several lifetime percentiles for both continuous duty and variable duty applications. Finally, a feasible reliability-oriented multi-objective optimization platform is established, based on which a study-case electrical machine for aerospace application is designed and optimized. The prototype is manufactured to verify the optimized performances.