Maria Gonta
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Maria Gonta has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Gheorghe Duca
Moldova State University
9 shared publications - Larisa Mocanu
Institutul de Cercetare și Inovare, Universitatea de Stat din Moldova
8 shared publications - Carolina Grigoras
Universitatea de stat din Moldova
4 shared publications - Alexandru Ciocarlan
Laboratory “Chemistry of Natural and Biologically Active Compounds”, Institute of Chemistry, Moldova State University, Chisinau, Republic of Moldova
3 shared publications - Corneliu Cojocaru
“Petru Poni” Institute of Macromolecular Chemistry, 41A Grigore Ghica Voda Alley, 700487 Iasi, Romania
3 shared publications Vera Matveevici
Moldova State University, Departament of Industrial and Ecological Chemistry MD-2009,Chisinau, Mateevici 60, Republic of Moldova
3 shared publications
Latest Publications
- 1 May 2026
- Published by Moldova State University
- p. 316-324
Advanced oxidation processes of direct red 81 dye: optimization of physico-chemical parameters and competitive mechanisms in the presence of phenol
This study investigates the degradation of the azo dye Direct Red 81 (DR81) via the Fenton process, focusing on operational parameter optimization and competitive reaction mechanisms. The effects of pH (2.5-4.0), Fe²⁺ concentration (2.8-11.2 mg/L), H₂O₂ (17-102 mg/L), and gallic acid (0-10 mg/L) were evaluated. The degradation kinetics follows a pseudo-first-order model (R² ≥ 0.98), assuming a quasisteadystate concentration of hydroxyl radicals. Optimal conditions (pH 2.5; Fe²⁺ 5.6 mg/L; H₂O₂ 102 mg/L) yielded 99.4% removal within 60 minutes. Gallic acid exhibited a strong inhibitory effect, decreasing efficiency to 9.2% at 10 mg/L due to hydroxyl radical scavenging and iron complexation. The results highlight the critical role of competitive interactions for reactive species in multicomponent aqueous systems.
- 1 May 2026
- Published by Moldova State University
- p. 316-324
Advanced oxidation processes of direct red 81 dye: optimization of physico-chemical parameters and competitive mechanisms in the presence of phenol
This study investigates the degradation of the azo dye Direct Red 81 (DR81) via the Fenton process, focusing on operational parameter optimization and competitive reaction mechanisms. The effects of pH (2.5-4.0), Fe²⁺ concentration (2.8-11.2 mg/L), H₂O₂ (17-102 mg/L), and gallic acid (0-10 mg/L) were evaluated. The degradation kinetics follows a pseudo-first-order model (R² ≥ 0.98), assuming a quasisteadystate concentration of hydroxyl radicals. Optimal conditions (pH 2.5; Fe²⁺ 5.6 mg/L; H₂O₂ 102 mg/L) yielded 99.4% removal within 60 minutes. Gallic acid exhibited a strong inhibitory effect, decreasing efficiency to 9.2% at 10 mg/L due to hydroxyl radical scavenging and iron complexation. The results highlight the critical role of competitive interactions for reactive species in multicomponent aqueous systems.
- 1 February 2026
- Published by Moldova State University
- p. 722-729
Oxidation and mineralization of catechol from aqueous solutions using homogeneous processes
Catechol is widely used in industrial applications such as photographic de-velopers, lubricants, polymerization inhibitors, and pharmaceuticals. Due to its toxicity and persistence, its removal from wastewater is essential. This study investigated the degradation and mineralization of catechol using homogeneous advanced oxidation processes—specifical-ly, Fenton and Photo-Fenton. Key operational parameters, including pH, reagent concentra-tions, UV type, and molar ratios, were systematically optimized. Optimal performance was observed at pH 2.6-3.2, with 0.1 mM H2O2 and Fe2+, and a molar ratio of H2O2 : Fe2+ : catechol of 10 : 1 : 2. UV-C radiation significantly enhanced the Photo-Fenton process by promoting Fe²⁺ regeneration. Kinetic analysis showed pseudo-first-order behavior, with the highest rate constant (0.00347 min-1) and a degradation rate of 9.23·10-8 mol/L·s. The proposed degradati-on mechanism involves hydroxyl radical attack, ring cleavage, and mineralization to CO2 and H2O. Among the systems tested, the UV-C assisted Photo-Fenton process achieved the highest catechol removal and COD reduction. These results highlight the potential of homogeneous AOPs for efficient treatment of phenolic pollutants in industrial wastewater.
- 1 February 2026
- Published by Moldova State University
- p. 722-729
Oxidation and mineralization of catechol from aqueous solutions using homogeneous processes
Catechol is widely used in industrial applications such as photographic de-velopers, lubricants, polymerization inhibitors, and pharmaceuticals. Due to its toxicity and persistence, its removal from wastewater is essential. This study investigated the degradation and mineralization of catechol using homogeneous advanced oxidation processes—specifical-ly, Fenton and Photo-Fenton. Key operational parameters, including pH, reagent concentra-tions, UV type, and molar ratios, were systematically optimized. Optimal performance was observed at pH 2.6-3.2, with 0.1 mM H2O2 and Fe2+, and a molar ratio of H2O2 : Fe2+ : catechol of 10 : 1 : 2. UV-C radiation significantly enhanced the Photo-Fenton process by promoting Fe²⁺ regeneration. Kinetic analysis showed pseudo-first-order behavior, with the highest rate constant (0.00347 min-1) and a degradation rate of 9.23·10-8 mol/L·s. The proposed degradati-on mechanism involves hydroxyl radical attack, ring cleavage, and mineralization to CO2 and H2O. Among the systems tested, the UV-C assisted Photo-Fenton process achieved the highest catechol removal and COD reduction. These results highlight the potential of homogeneous AOPs for efficient treatment of phenolic pollutants in industrial wastewater.
- 1 February 2026
- Published by Moldova State University
- p. 670-676
Advanced oxidation processes of the anionic surfactant sodium dodecylbenzenesulfonate
This study investigates the degradation of sodium dodecylbenzenesulfonate (SDBS), an anionic surfactant and persistent contaminant commonly found in industrial waste-water, through advanced oxidation processes (AOPs). The experimental research focused on eva-luating and comparing the efficiency of Fenton and photo-Fenton processes. Kinetic parameters were analyzed in relation to pH, hydrogen peroxide concentration, and ferrous ion concentration. Under optimal conditions (pH = 3,0 [H2O2]0 = 1 · 10-3 М and [Fe2+]0 = 1 · 10-4 М), the conventional Fenton process achieved a degradation efficiency of approximately 42.5%, with a reaction rate of 2.47 · 10-7 M/s. In contrast, the photo-Fenton process, enhanced by UV-C irradiation, significantly improved the oxidative performance, resulting in a degradation efficiency of up to 70.2%.
- 1 February 2026
- Published by Moldova State University
- p. 670-676
Advanced oxidation processes of the anionic surfactant sodium dodecylbenzenesulfonate
This study investigates the degradation of sodium dodecylbenzenesulfonate (SDBS), an anionic surfactant and persistent contaminant commonly found in industrial waste-water, through advanced oxidation processes (AOPs). The experimental research focused on eva-luating and comparing the efficiency of Fenton and photo-Fenton processes. Kinetic parameters were analyzed in relation to pH, hydrogen peroxide concentration, and ferrous ion concentration. Under optimal conditions (pH = 3,0 [H2O2]0 = 1 · 10-3 М and [Fe2+]0 = 1 · 10-4 М), the conventional Fenton process achieved a degradation efficiency of approximately 42.5%, with a reaction rate of 2.47 · 10-7 M/s. In contrast, the photo-Fenton process, enhanced by UV-C irradiation, significantly improved the oxidative performance, resulting in a degradation efficiency of up to 70.2%.
- Open Access
- 23 January 2026
- Published by Periodic Publication Journal of Science, Innovation, Culture and Art "SCIENCE and INNOVATION" in Akademos
- No. 4(79),p. 44-49
Propolisul ca bioindicator al contaminării cu microplastice în mediul ambiant din Republica Moldova
Honey bees, due to their morphological characteristics, as well as beekeeping products, are considered relevant indicators of environmental pollution with toxic substances, whether it is microplastic particles (MP) or other toxic contaminants. The objective of this study was to evaluate the potential of propolis to be used as a bioindicator of microplastic contamination in various geographical areas of the Republic of Moldova. Eight samples of raw propolis, collected by beekeepers during the period 2023– 2024, were analyzed. Microscopic examination was performed to characterize the morphological and chromatic characteristics of the detected particles. The morphological analysis revealed that the predominant forms were fibers, in five different types, and one type of fragment. The fragments were quantitatively identified in a larger number – 53%, and fibers made up 47%, presenting a high structural and chromatic diversity, compared to the fragments. To confirm the polymeric nature and determine their chemical composition, infrared absorption spectra (FTIR) were recorded. The spectra of the microplastic particles from the propolis were compared with those of the reference substance – polyethylene terephthalate (PET). It was found that all the recorded spectra of the microplastic particles from the propolis showed characteristic bands of polyethylene terephthalate (PET). Thus, the results obtained indicate that propolis can serve as an effective indicator of microplastic pollution.
- 23 January 2026
- Published by Periodic Publication Journal of Science, Innovation, Culture and Art "SCIENCE and INNOVATION" in Akademos
- No. 4(79),p. 44-49
Open AccessPropolisul ca bioindicator al contaminării cu microplastice în mediul ambiant din Republica Moldova
Honey bees, due to their morphological characteristics, as well as beekeeping products, are considered relevant indicators of environmental pollution with toxic substances, whether it is microplastic particles (MP) or other toxic contaminants. The objective of this study was to evaluate the potential of propolis to be used as a bioindicator of microplastic contamination in various geographical areas of the Republic of Moldova. Eight samples of raw propolis, collected by beekeepers during the period 2023– 2024, were analyzed. Microscopic examination was performed to characterize the morphological and chromatic characteristics of the detected particles. The morphological analysis revealed that the predominant forms were fibers, in five different types, and one type of fragment. The fragments were quantitatively identified in a larger number – 53%, and fibers made up 47%, presenting a high structural and chromatic diversity, compared to the fragments. To confirm the polymeric nature and determine their chemical composition, infrared absorption spectra (FTIR) were recorded. The spectra of the microplastic particles from the propolis were compared with those of the reference substance – polyethylene terephthalate (PET). It was found that all the recorded spectra of the microplastic particles from the propolis showed characteristic bands of polyethylene terephthalate (PET). Thus, the results obtained indicate that propolis can serve as an effective indicator of microplastic pollution.
- 1 October 2025
- Published by Moldova State University
- p. 412-416
Catalytic oxidation of gallic: mechanisms, kinetics, and byproduct analysis
This paper investigates the catalytic oxidation of gallic acid utilizing Fenton and Fenton/UV reactions, focusing on elucidating the mechanisms, kinetics, and byproducts of the oxidation processes. Gallic acid, a naturally occurring phenolic compound, presents both health benefits and environmental challenges due to its persistence and potential toxicity. The Fenton and Fenton/UV reactions generate highly reactive hydroxyl radicals, initiating the oxidation of GA. The study explores the pseudofirst-order kinetics of GA degradation (1.47·10⁻⁴ M), examining variables such as [Fe²⁺], [H₂O₂], pH, and temperature. Results indicate 50% degradation and 30% mineralization after 5 min, with improved COD removal over 60 min. Optimal conditions were identified as [H₂O₂] = 5·10⁻⁴ M, [Fe²⁺] = 1·10⁻⁵ M, pH=3.0. The average rate constant (kₐᵥg) was 5.7·10⁻³ s⁻⁻¹. Intermediate byproducts include hydroxylated derivatives and carboxylic acids. These findings highlight the relevance of advanced oxidation for environmental biotechnology.
- 1 October 2025
- Published by Moldova State University
- p. 412-416
Catalytic oxidation of gallic: mechanisms, kinetics, and byproduct analysis
This paper investigates the catalytic oxidation of gallic acid utilizing Fenton and Fenton/UV reactions, focusing on elucidating the mechanisms, kinetics, and byproducts of the oxidation processes. Gallic acid, a naturally occurring phenolic compound, presents both health benefits and environmental challenges due to its persistence and potential toxicity. The Fenton and Fenton/UV reactions generate highly reactive hydroxyl radicals, initiating the oxidation of GA. The study explores the pseudofirst-order kinetics of GA degradation (1.47·10⁻⁴ M), examining variables such as [Fe²⁺], [H₂O₂], pH, and temperature. Results indicate 50% degradation and 30% mineralization after 5 min, with improved COD removal over 60 min. Optimal conditions were identified as [H₂O₂] = 5·10⁻⁴ M, [Fe²⁺] = 1·10⁻⁵ M, pH=3.0. The average rate constant (kₐᵥg) was 5.7·10⁻³ s⁻⁻¹. Intermediate byproducts include hydroxylated derivatives and carboxylic acids. These findings highlight the relevance of advanced oxidation for environmental biotechnology.
- 1 January 2025
- Published by Moldova State University
- p. 636-643
Study of kinetics of transformation of galliric acid using possible oxidation processes in model systems
Gallic acid is a naturally occurring phenolic compound. Due to its persistence and potential toxicity, presents environmental challenges. Removal of gallic acid from wastewater, allows recycling and reuse of water in various industrial processes, reducing water consumption and contributing to sustainable practices. As a result, the removal of gallic acid from aqueous model solutions was studied by applying (AOPs): AG/Fenton, AG/Fenton/UV, AG/TiO2/H2O2/UV according to different physicochemical parameters. AOPs have emerged as promising techniques due to their ability to generate highly reactive hydroxyl radicals, initiating the oxidation of GA and leading to its degradation. Based on the results obtained the kinetics degradation of GA (25 mg/L) can be described by pseudo-first-order kinetics. By comparison, it was identified that Fenton reactions offer efficient means for the oxidation of GA, leading to its degradation (50%) and mineralization (30%) after 5 min of reaction. Thus, the best initial operating conditions, for practical purposes, are [H2O2] = 5·10-4 mol/L, [Fe2+] = 1·10-5 mol/L, and pH value 3.0. It was found that the conversion kinetics of GA is carried out at the rate constant (kavg.) is 5.7·10-3 s-1, the reaction rate (Δc/Δtavg.) is 6.7·10-7 mol/Ls-1 during 118 s (τ1/2). During the oxidation of GA by Fenton reactions, various intermediate and byproducts are formed, including: hydroxylation products resulting from the attack of hydroxyl radicals on the aromatic ring; cleavage products such as formic acid, oxalic acid, and acetic acid; carbon dioxide and water: complete mineralization of GA to harmless byproducts, indicating the complete oxidation of the organic substrate.
- 1 January 2025
- Published by Moldova State University
- p. 636-643
Study of kinetics of transformation of galliric acid using possible oxidation processes in model systems
Gallic acid is a naturally occurring phenolic compound. Due to its persistence and potential toxicity, presents environmental challenges. Removal of gallic acid from wastewater, allows recycling and reuse of water in various industrial processes, reducing water consumption and contributing to sustainable practices. As a result, the removal of gallic acid from aqueous model solutions was studied by applying (AOPs): AG/Fenton, AG/Fenton/UV, AG/TiO2/H2O2/UV according to different physicochemical parameters. AOPs have emerged as promising techniques due to their ability to generate highly reactive hydroxyl radicals, initiating the oxidation of GA and leading to its degradation. Based on the results obtained the kinetics degradation of GA (25 mg/L) can be described by pseudo-first-order kinetics. By comparison, it was identified that Fenton reactions offer efficient means for the oxidation of GA, leading to its degradation (50%) and mineralization (30%) after 5 min of reaction. Thus, the best initial operating conditions, for practical purposes, are [H2O2] = 5·10-4 mol/L, [Fe2+] = 1·10-5 mol/L, and pH value 3.0. It was found that the conversion kinetics of GA is carried out at the rate constant (kavg.) is 5.7·10-3 s-1, the reaction rate (Δc/Δtavg.) is 6.7·10-7 mol/Ls-1 during 118 s (τ1/2). During the oxidation of GA by Fenton reactions, various intermediate and byproducts are formed, including: hydroxylation products resulting from the attack of hydroxyl radicals on the aromatic ring; cleavage products such as formic acid, oxalic acid, and acetic acid; carbon dioxide and water: complete mineralization of GA to harmless byproducts, indicating the complete oxidation of the organic substrate.
- 1 January 2025
- Published by Moldova State University
- p. 591-598
Antioxidant activity of films with extract from plant products of Sophora japonica L
Plant products of S. japonica, more precisely: flowers, fruits and seeds collected in May and September, respectively, have been conditioned, and the products obtained serve as a source of raw material. The extracts were obtained from the vegetable raw material by maceration, distillation and hydrodistillation using various solvents, with the subsequent incorporation into the filmogenic mixture of chitosan:pectin, to obtain polymeric films. The obtained films were evaluated according to quality indices, thus the appearance, smell and mechanical properties were analyzed, the thickness of the films was measured and antioxidant properties were determined. The prepared biomaterials are uniform, thin, elastic, flexible, have no smell and have a specific color of the composition, manifest an antioxidant activity, but this varies depending on the composition of the prepared films.
- 1 January 2025
- Published by Moldova State University
- p. 591-598
Antioxidant activity of films with extract from plant products of Sophora japonica L
Plant products of S. japonica, more precisely: flowers, fruits and seeds collected in May and September, respectively, have been conditioned, and the products obtained serve as a source of raw material. The extracts were obtained from the vegetable raw material by maceration, distillation and hydrodistillation using various solvents, with the subsequent incorporation into the filmogenic mixture of chitosan:pectin, to obtain polymeric films. The obtained films were evaluated according to quality indices, thus the appearance, smell and mechanical properties were analyzed, the thickness of the films was measured and antioxidant properties were determined. The prepared biomaterials are uniform, thin, elastic, flexible, have no smell and have a specific color of the composition, manifest an antioxidant activity, but this varies depending on the composition of the prepared films.
- 1 January 2025
- Published by Moldova State University
- p. 599-605
Chemical composition of propolis extract
Propolis is a natural product with a complex chemical composition, which varies largely by geographical area and plant species visited by bees. Although the propolis collected from the same geographical area has similarities in chemical composition, specific compounds are also attested, due to the local flora. Over the years, numerous studies have been carried out on the chemical composition of propolis, but for the moment there is no common procedure for obtaining and analyzing propolis extracts, which makes it difficult to use the product in the food, cosmetics and pharmaceutical industries. In the present study we aimed to analyze the chemical composition of propolis extracts obtained by maceration with the use of 60%, 70% and 80% ethyl alcohol as solvent, in order to identify the main compounds and analyze the influence of solvent concentration on the extraction of active ingredients. For this purpose, GC-MS and UV-Vis analysis were performed, which confirmed that the predominant constituents are flavanoids with unsubstituted B ring, a characteristic aspect of propolis originating from the temperate zone.
- 1 January 2025
- Published by Moldova State University
- p. 599-605
Chemical composition of propolis extract
Propolis is a natural product with a complex chemical composition, which varies largely by geographical area and plant species visited by bees. Although the propolis collected from the same geographical area has similarities in chemical composition, specific compounds are also attested, due to the local flora. Over the years, numerous studies have been carried out on the chemical composition of propolis, but for the moment there is no common procedure for obtaining and analyzing propolis extracts, which makes it difficult to use the product in the food, cosmetics and pharmaceutical industries. In the present study we aimed to analyze the chemical composition of propolis extracts obtained by maceration with the use of 60%, 70% and 80% ethyl alcohol as solvent, in order to identify the main compounds and analyze the influence of solvent concentration on the extraction of active ingredients. For this purpose, GC-MS and UV-Vis analysis were performed, which confirmed that the predominant constituents are flavanoids with unsubstituted B ring, a characteristic aspect of propolis originating from the temperate zone.
- Open Access
- 1 June 2024
- Published by Moldova State University in Studia Universitatis Moldaviae. Seria Științe ale Naturii
- No. 1(171),p. 247-253
Total polyphenol content and antioxidant activity of ethanolic propolis extracts
Propolis is a beekeeping by-product with a high content of polyphenols that manifests antioxidant action. In this article was conducted the comparative study of the obtained results regarding the total polyphenol content of propolis extracts and their antioxidant activity depending on several factors: solvent concentration, extraction method. The total polyphenol content was determined by the Folin-Ciocalteu method and the antioxidant activity by the DPPH method. The analysis of the data revealed that the total polyphenol content and antioxidant activity is largely depended by the solvent concentration, optimal for obtaining ethanolic extracts of propolis with a high content of polyphenols, being ethyl alcohol with a concentration of 70%.
- 1 June 2024
- Published by Moldova State University in Studia Universitatis Moldaviae. Seria Științe ale Naturii
- No. 1(171),p. 247-253
Open AccessTotal polyphenol content and antioxidant activity of ethanolic propolis extracts
Propolis is a beekeeping by-product with a high content of polyphenols that manifests antioxidant action. In this article was conducted the comparative study of the obtained results regarding the total polyphenol content of propolis extracts and their antioxidant activity depending on several factors: solvent concentration, extraction method. The total polyphenol content was determined by the Folin-Ciocalteu method and the antioxidant activity by the DPPH method. The analysis of the data revealed that the total polyphenol content and antioxidant activity is largely depended by the solvent concentration, optimal for obtaining ethanolic extracts of propolis with a high content of polyphenols, being ethyl alcohol with a concentration of 70%.
- 1 September 2023
- Published by Moldova State University
Removal mixture of drugs in aqueous solution by using titanium dioxide photocatalyst
- 1 September 2023
- Published by Moldova State University
Removal mixture of drugs in aqueous solution by using titanium dioxide photocatalyst