Enrique M. del Castillo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Enrique M. del Castillo has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Alomir H. Favero Neto
Department of Civil and Environmental Engineering Bucknell University Lewisburg Pennsylvania USA
5 shared publications - Ronaldo I. Borja
Department of Civil and Environmental Engineering Stanford University Stanford California USA
4 shared publications - Jun Geng
Department of Civil and Environmental Engineering Stanford University Stanford California USA
2 shared publications - Liuchi Li
Department of Civil and Environmental Engineering, Princeton University, Princeton, NJ 08544, USA
2 shared publications Ronaldo I. Borja
Stanford University
2 shared publications- Allan M. Rubin
Department of Geosciences Princeton University Princeton NJ USA
1 shared publication
Latest Publications
- Open Access
- 1 September 2026
- Published by Elsevier in Extreme Mechanics Letters
- Vol. 88
Crack steering in a homogeneous solid via out-of-plane constraints: A three-dimensional phase-field modeling study
- 1 September 2026
- Published by Elsevier in Extreme Mechanics Letters
- Vol. 88
Open AccessCrack steering in a homogeneous solid via out-of-plane constraints: A three-dimensional phase-field modeling study
- Open Access
- 16 July 2026
- Published by Elsevier in International Journal of Solids and Structures
- Vol. 340
Assessing variational phase-field fracture against LEFM predictions for crack-tip dynamics
- 16 July 2026
- Published by Elsevier in International Journal of Solids and Structures
- Vol. 340
Open AccessAssessing variational phase-field fracture against LEFM predictions for crack-tip dynamics
- Open Access
- 21 April 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 131 (4)
Large Deformation, Pressure‐Driven Mechanistic Modeling of the 2018 Caldera Collapse at Kīlauea Volcano, HI
Volcanic calderas are large depressions formed by the rapid collapse of overlying rock into a magma chamber during eruptions. We utilize Smoothed Particle Hydrodynamics (SPH), a continuum, meshfree numerical method, to study the 2018 caldera collapse at Kīlauea volcano in Hawaii. We model the emergence of localized and distributed inelastic deformation (shear bands) during the collapse and their relation to chamber depressurization‐induced crustal down‐sagging. The SPH method has various advantageous features, namely its ability to handle large deformations, its nonlocal properties, and its capacity to accommodate strain localization without additional enhancements to the method. We specify pressure boundary conditions along the chamber top to model depressurization of the chamber, using the pressure change time history for the 2018 event inferred from a combination of geodetic data and lava‐lake drainage. This includes non‐monotonic pressure changes associated with early partial collapse events. Our simulations help to bound the critical magma pressure that triggers collapse and provide insights into various features including the stress arching effect and the evolution and directionality of both slip planes and zones of localized deformation. Using an elastoplastic Drucker‐Prager constitutive model, we analyze the contribution of inelastic deformation before and after the initiation of collapse both adjacent to Kīlauea caldera and within the subsiding block, concluding that significant distributed plastic deformation occurs once collapse initiates. Mechanistic differences between the pressure‐driven collapses and the traditional displacement‐driven trapdoor‐problem collapse are explored.
- 21 April 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 131 (4)
Open AccessLarge Deformation, Pressure‐Driven Mechanistic Modeling of the 2018 Caldera Collapse at Kīlauea Volcano, HI
Volcanic calderas are large depressions formed by the rapid collapse of overlying rock into a magma chamber during eruptions. We utilize Smoothed Particle Hydrodynamics (SPH), a continuum, meshfree numerical method, to study the 2018 caldera collapse at Kīlauea volcano in Hawaii. We model the emergence of localized and distributed inelastic deformation (shear bands) during the collapse and their relation to chamber depressurization‐induced crustal down‐sagging. The SPH method has various advantageous features, namely its ability to handle large deformations, its nonlocal properties, and its capacity to accommodate strain localization without additional enhancements to the method. We specify pressure boundary conditions along the chamber top to model depressurization of the chamber, using the pressure change time history for the 2018 event inferred from a combination of geodetic data and lava‐lake drainage. This includes non‐monotonic pressure changes associated with early partial collapse events. Our simulations help to bound the critical magma pressure that triggers collapse and provide insights into various features including the stress arching effect and the evolution and directionality of both slip planes and zones of localized deformation. Using an elastoplastic Drucker‐Prager constitutive model, we analyze the contribution of inelastic deformation before and after the initiation of collapse both adjacent to Kīlauea caldera and within the subsiding block, concluding that significant distributed plastic deformation occurs once collapse initiates. Mechanistic differences between the pressure‐driven collapses and the traditional displacement‐driven trapdoor‐problem collapse are explored.
- 13 April 2026
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 50 (10) , 4059-4089
A Coupled u – p w SPH Formulation for Hydromechanical Modeling of Retrogressive Landslides and Comparison With a Penalty‐Based Approach
We present a strongly coupled displacement () and pore water pressure () version of the Biot–Zienkiewicz (–) equations in saturated porous media for the meshfree Lagrangian smoothed particle hydrodynamics (SPH) method. We propose two distinct formulations using a single particle layer, two‐phase framework, one based on a one‐step solution of a pressure Poisson equation (PPE formulation) and another allowing compressibility of the fluid resulting in an explicit rate equation for the pore pressure (PR formulation). We discuss both formulations from a numerical perspective and verify them using benchmark problems from poroelasticity, including Cryer's problem, as well as using undrained triaxial tests, where we additionally compare the results against a weakly coupled penalty‐based undrained framework for SPH. Beyond the formulations, the focus of this work is on modeling retrogressive landslides in saturated sensitive clays, which are particularly destructive due to their extended runout and fast movement. Our simulations emphasize performing strongly coupled hydromechanical modeling even for quasi‐undrained conditions, contrary to the predominant practices in the literature, as the structural features of the landslides change significantly when pore pressure dissipation and coupled effects are included. Additionally, spreads develop under a greater variety of slope conditions as opposed to the more fluidized flowslide type of retrogressive landslides captured when solely considering undrained behavior. Lastly, we apply the PR formulation to explore how slope steepness and height influence deformation modes and apply the framework to simulate the 1994 Sainte‐Monique landslide, recreating the topographic profile, runout, and deformation features post‐failure.
- 13 April 2026
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 50 (10) , 4059-4089
A Coupled u – p w SPH Formulation for Hydromechanical Modeling of Retrogressive Landslides and Comparison With a Penalty‐Based Approach
We present a strongly coupled displacement () and pore water pressure () version of the Biot–Zienkiewicz (–) equations in saturated porous media for the meshfree Lagrangian smoothed particle hydrodynamics (SPH) method. We propose two distinct formulations using a single particle layer, two‐phase framework, one based on a one‐step solution of a pressure Poisson equation (PPE formulation) and another allowing compressibility of the fluid resulting in an explicit rate equation for the pore pressure (PR formulation). We discuss both formulations from a numerical perspective and verify them using benchmark problems from poroelasticity, including Cryer's problem, as well as using undrained triaxial tests, where we additionally compare the results against a weakly coupled penalty‐based undrained framework for SPH. Beyond the formulations, the focus of this work is on modeling retrogressive landslides in saturated sensitive clays, which are particularly destructive due to their extended runout and fast movement. Our simulations emphasize performing strongly coupled hydromechanical modeling even for quasi‐undrained conditions, contrary to the predominant practices in the literature, as the structural features of the landslides change significantly when pore pressure dissipation and coupled effects are included. Additionally, spreads develop under a greater variety of slope conditions as opposed to the more fluidized flowslide type of retrogressive landslides captured when solely considering undrained behavior. Lastly, we apply the PR formulation to explore how slope steepness and height influence deformation modes and apply the framework to simulate the 1994 Sainte‐Monique landslide, recreating the topographic profile, runout, and deformation features post‐failure.
- 23 October 2024
- Published by Springer Nature in Acta Geotechnica
- Vol. 19 (12) , 7767-7798
Fault rupture propagation through stratified sand–clay deposits and engineered earth structures: a meshfree and critical-state modeling approach
- 23 October 2024
- Published by Springer Nature in Acta Geotechnica
- Vol. 19 (12) , 7767-7798
Fault rupture propagation through stratified sand–clay deposits and engineered earth structures: a meshfree and critical-state modeling approach
- 4 October 2024
- Published by Springer Nature in Computational Mechanics
- Vol. 75 (6) , 1745-1768
A nonlocal kernel-based continuum damage model for compaction band formation in porous sedimentary rock
- 4 October 2024
- Published by Springer Nature in Computational Mechanics
- Vol. 75 (6) , 1745-1768
A nonlocal kernel-based continuum damage model for compaction band formation in porous sedimentary rock
- 14 June 2024
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 48 (12) , 3227-3257
An SPH framework for drained and undrained loading over large deformations
We propose a new approach for performing drained and undrained loading of elastoplastic geomaterials over large deformations using smoothed particle hydrodynamics (SPH), a meshfree continuum particle method, combined with the modified Cam Clay (MCC) model of critical state soil mechanics. The numerical approach draws upon a novel one‐particle two‐phase penalty‐method based formulation for handling undrained loading in saturated soils, which allows tracking of the buildup of pore‐water pressures under combined shearing and compression. Large‐scale parallelized simulations are employed to accommodate a significant number of degrees of freedom in a three‐dimensional setting. After verification and benchmark testing, the SPH based formulation is used to analyze the propagation of reverse faults through fluid‐saturated clay deposits and the rupture of strike‐slip faults across earthen embankments. The computational methodology tests the robustness of the meshfree approach in situations where the soil tends to dilate on the ‘dry’ side of the critical state line and to compact on the ‘wet’ side, but cannot, because of the incompressibility constraint imposed by undrained loading. Our results extend the current understanding of fault rupture modeling and further demonstrate the potential of our framework together with the SPH method for large deformation analyses of complex problems in geotechnics.
- 14 June 2024
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 48 (12) , 3227-3257
An SPH framework for drained and undrained loading over large deformations
We propose a new approach for performing drained and undrained loading of elastoplastic geomaterials over large deformations using smoothed particle hydrodynamics (SPH), a meshfree continuum particle method, combined with the modified Cam Clay (MCC) model of critical state soil mechanics. The numerical approach draws upon a novel one‐particle two‐phase penalty‐method based formulation for handling undrained loading in saturated soils, which allows tracking of the buildup of pore‐water pressures under combined shearing and compression. Large‐scale parallelized simulations are employed to accommodate a significant number of degrees of freedom in a three‐dimensional setting. After verification and benchmark testing, the SPH based formulation is used to analyze the propagation of reverse faults through fluid‐saturated clay deposits and the rupture of strike‐slip faults across earthen embankments. The computational methodology tests the robustness of the meshfree approach in situations where the soil tends to dilate on the ‘dry’ side of the critical state line and to compact on the ‘wet’ side, but cannot, because of the incompressibility constraint imposed by undrained loading. Our results extend the current understanding of fault rupture modeling and further demonstrate the potential of our framework together with the SPH method for large deformation analyses of complex problems in geotechnics.
- 16 August 2023
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 42 (8)
Strain Localization Patterns and Thrust Propagation in 3‐D Discrete Element Method (DEM) Models of Accretionary Wedges
High‐resolution three‐dimensional discrete element method (DEM) simulations of sandbox‐scale models of accretionary wedges suggest thrusts follow a variety of propagation processes and orientations depending on a number of factors. These include the stage of development of the wedge (precritical vs. critical), basal friction, and type of thrust (forward vs. backward‐vergent). In terms of propagation processes, two clear mechanisms are identified. The first involves propagation from the décollement to the wedge top, similar to the standard model of thrust propagation seen in many kinematic models, and in the second, thrusts grow downward from an initial nucleation point just below the top surface of the wedge as well as upward from the décollement joining in the middle. In terms of orientation, forward‐vergent thrusts initially form at Roscoe (θR = 45° − Ψ/2) or Arthur orientations (θA = 45° − (ϕ + Ψ)/4), and over greater shortening, rotate into Coulomb orientations (θC = 45° − ϕ/2). To arrive at these results, a wide array of continuum parameters and fields were extracted from the DEM simulations, including stress, strain, strain rate, kinetic energy, Mohr‐Coulomb parameters, and proximity to yielding using the Drucker‐Prager criterion to visualize thrust nucleation and propagation. Lastly, the advantages and disadvantages of these continuum proxies for discerning failure in the granular assembly are considered, and the spatial and temporal relationship between proximity to yielding and strain localization (both pre‐peak and subsequent persistent shear banding) in the granular model of an accretionary wedge is explored.
- 16 August 2023
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 42 (8)
Strain Localization Patterns and Thrust Propagation in 3‐D Discrete Element Method (DEM) Models of Accretionary Wedges
High‐resolution three‐dimensional discrete element method (DEM) simulations of sandbox‐scale models of accretionary wedges suggest thrusts follow a variety of propagation processes and orientations depending on a number of factors. These include the stage of development of the wedge (precritical vs. critical), basal friction, and type of thrust (forward vs. backward‐vergent). In terms of propagation processes, two clear mechanisms are identified. The first involves propagation from the décollement to the wedge top, similar to the standard model of thrust propagation seen in many kinematic models, and in the second, thrusts grow downward from an initial nucleation point just below the top surface of the wedge as well as upward from the décollement joining in the middle. In terms of orientation, forward‐vergent thrusts initially form at Roscoe (θR = 45° − Ψ/2) or Arthur orientations (θA = 45° − (ϕ + Ψ)/4), and over greater shortening, rotate into Coulomb orientations (θC = 45° − ϕ/2). To arrive at these results, a wide array of continuum parameters and fields were extracted from the DEM simulations, including stress, strain, strain rate, kinetic energy, Mohr‐Coulomb parameters, and proximity to yielding using the Drucker‐Prager criterion to visualize thrust nucleation and propagation. Lastly, the advantages and disadvantages of these continuum proxies for discerning failure in the granular assembly are considered, and the spatial and temporal relationship between proximity to yielding and strain localization (both pre‐peak and subsequent persistent shear banding) in the granular model of an accretionary wedge is explored.
- 13 December 2022
- Published by Springer Nature
- p. 155-161
Modeling Fault Rupture Through Layered Geomaterials with SPH
- 13 December 2022
- Published by Springer Nature
- p. 155-161
Modeling Fault Rupture Through Layered Geomaterials with SPH
- 1 December 2021
- Published by Elsevier in Journal of Structural Geology
- Vol. 153
A continuum meshfree method for sandbox-style numerical modeling of accretionary and doubly vergent wedges
- 1 December 2021
- Published by Elsevier in Journal of Structural Geology
- Vol. 153
A continuum meshfree method for sandbox-style numerical modeling of accretionary and doubly vergent wedges