Jingjun Lou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jingjun Lou has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
B. L. Xia
1 shared publication- Benhui Yang
University of Georgia
1 shared publication C. X. Yuan
1 shared publicationD. Y. Pang
1 shared publication- Dinh Trong Tran
Institute of Physics, Vietnam Academy of Science and Technology, Hanoi, Vietnam
1 shared publication - Eiji Ideguchi
Research Center for Nuclear Physics, The University of Osaka , 10-1 Mihogaoka, Ibaraki, Osaka 567-0047
1 shared publication
Latest Publications
- Open Access
- 31 August 2023
- Published by Wiley in Shock and Vibration
- Vol. 2023, 1-20
Statistically Optimized Near-Field Acoustic Holography Using Prolate Spheroidal Wave Functions
Near-field acoustic holography (NAH) is an effective tool for realizing accurate sound field reconstruction in three-dimensional space on the prerequisite that appropriate elementary wave functions are selected or constructed to match the characteristics of the sound sources. However, for elongated sources, common wave functions, i.e., plane, cylindrical, or spherical waves, sometimes do not perform well during the sound field projections. To solve this problem, statistically optimized near-field acoustical holography combined with prolate spheroidal wave functions is proposed. In the approach, the sound field is expanded by a series of prolate spheroidal wave functions, whose wavefronts can be set nearly conformal to the elongated sources. Based on these wave functions, fewer expansion terms are required to model the sound field, and the need for regularization can be reduced during the inverse solving process. Therefore, the accuracy of the reconstruction results can be further improved. Numerical simulations are conducted by two types of elongated source models, namely, spatially separated and extended. The results show that the proposed method can effectively reconstruct the sound pressures of elongated sources and perform robustly across a wide frequency range. Simultaneously, a designed experiment is carried out in an anechoic chamber, which demonstrates the feasibility of the proposed method.
- 31 August 2023
- Published by Wiley in Shock and Vibration
- Vol. 2023, 1-20
Open AccessStatistically Optimized Near-Field Acoustic Holography Using Prolate Spheroidal Wave Functions
Near-field acoustic holography (NAH) is an effective tool for realizing accurate sound field reconstruction in three-dimensional space on the prerequisite that appropriate elementary wave functions are selected or constructed to match the characteristics of the sound sources. However, for elongated sources, common wave functions, i.e., plane, cylindrical, or spherical waves, sometimes do not perform well during the sound field projections. To solve this problem, statistically optimized near-field acoustical holography combined with prolate spheroidal wave functions is proposed. In the approach, the sound field is expanded by a series of prolate spheroidal wave functions, whose wavefronts can be set nearly conformal to the elongated sources. Based on these wave functions, fewer expansion terms are required to model the sound field, and the need for regularization can be reduced during the inverse solving process. Therefore, the accuracy of the reconstruction results can be further improved. Numerical simulations are conducted by two types of elongated source models, namely, spatially separated and extended. The results show that the proposed method can effectively reconstruct the sound pressures of elongated sources and perform robustly across a wide frequency range. Simultaneously, a designed experiment is carried out in an anechoic chamber, which demonstrates the feasibility of the proposed method.
- Open AccessStudy of $s$- and $d$-wave intruder strengths in $^{13}{\rm B}_{\rm g.s.}$ via a $p(^{13}{\rm B},d)^{12}{\rm B}$ reactionExperimental results of the $p(^{13}{\rm B},d)^{12}{\rm B}$ transfer reaction to the low-lying states in $^{12}$B are reported. The optical potential parameters for the entrance channel are extracted from the elastic scattering $p$($^{13}{\rm B}$, $p$) measured in the same experiment, while those for the exit channel are global ones. Spectroscopic factors associated with the $p$-, $s$-, and $d$-wave neutron transfer to the known $^{12}$B states, are extracted by comparing the deuteron angular distributions with the calculation results. The separated $s$- and $d$-wave intruder strengths in $^{13}{\rm B}_{\rm g.s.}$ were determined to be $10(2)\%$ and $6(1)\%$, respectively, which follow roughly the systematics for the $N$ = 8 neutron-rich isotones. The measured total intruder strength is in good agreement with the shell model calculation, while the individual ones evolve quite differently. Particularly, the sudden change of the $d$-wave intensity between $^{13}$B and $^{12}$Be needs further theoretical interpretation.Open AccessStudy of $s$- and $d$-wave intruder strengths in $^{13}{\rm B}_{\rm g.s.}$ via a $p(^{13}{\rm B},d)^{12}{\rm B}$ reactionExperimental results of the $p(^{13}{\rm B},d)^{12}{\rm B}$ transfer reaction to the low-lying states in $^{12}$B are reported. The optical potential parameters for the entrance channel are extracted from the elastic scattering $p$($^{13}{\rm B}$, $p$) measured in the same experiment, while those for the exit channel are global ones. Spectroscopic factors associated with the $p$-, $s$-, and $d$-wave neutron transfer to the known $^{12}$B states, are extracted by comparing the deuteron angular distributions with the calculation results. The separated $s$- and $d$-wave intruder strengths in $^{13}{\rm B}_{\rm g.s.}$ were determined to be $10(2)\%$ and $6(1)\%$, respectively, which follow roughly the systematics for the $N$ = 8 neutron-rich isotones. The measured total intruder strength is in good agreement with the shell model calculation, while the individual ones evolve quite differently. Particularly, the sudden change of the $d$-wave intensity between $^{13}$B and $^{12}$Be needs further theoretical interpretation.
- 22 January 2019
- Published by Taylor & Francis in Virtual and Physical Prototyping
- Vol. 14 (4) , 308-315
Effect of support on printed properties in fused deposition modelling processes
Additive manufacturing still suffers from redundant support material usage when printing parts with overhanging features. All the supports will be removed after fabrication, resulting in wasted materials. There are many works conducted for reducing support waste by improving support strategies. However, using different support strategies may lead to different printed qualities. In this paper, the effect of support strategy on printed qualities is investigated in fused deposition modelling processes. Three different support strategies are adopted for manufacturing the same 3D part. The finished surface roughness and flexural properties are compared for evaluating different support strategies, as well as the material waste and printing time. The results show that different support strategies may result in different printed surface roughness and flexural properties. To achieve the balance between support consumption and properties of printed parts, it becomes necessary to understand the effect of supports on printed qualities for choosing a best support strategy.
- 22 January 2019
- Published by Taylor & Francis in Virtual and Physical Prototyping
- Vol. 14 (4) , 308-315
Effect of support on printed properties in fused deposition modelling processes
Additive manufacturing still suffers from redundant support material usage when printing parts with overhanging features. All the supports will be removed after fabrication, resulting in wasted materials. There are many works conducted for reducing support waste by improving support strategies. However, using different support strategies may lead to different printed qualities. In this paper, the effect of support strategy on printed qualities is investigated in fused deposition modelling processes. Three different support strategies are adopted for manufacturing the same 3D part. The finished surface roughness and flexural properties are compared for evaluating different support strategies, as well as the material waste and printing time. The results show that different support strategies may result in different printed surface roughness and flexural properties. To achieve the balance between support consumption and properties of printed parts, it becomes necessary to understand the effect of supports on printed qualities for choosing a best support strategy.