Jingwei Cao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jingwei Cao has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Zhengwei Wang
State Key Laboratory of Hydroscience and Engineering, Department of Energy and Power Engineering, Tsinghua University, Beijing 100084, China
5 shared publications Liming Zhai
3 shared publications- Yongyao Luo
State Key Laboratory of Hydroscience and Engineering, Department of Energy and Power Engineering, Tsinghua University, Beijing 100084, China
3 shared publications - Liming Zhai
Dan Lin and Liming Zhai are with Continental-NTU Corporate Lab Nanyang Technological University 50 Nanyang Avenue 639798 Singapore
2 shared publications - Soo-Hwang Ahn
State Key Laboratory of Hydroscience and Engineering & Department of Energy and Power Engineering, Tsinghua University, Beijing 100084, China
2 shared publications Xin Liu
2 shared publications
Latest Publications
- 1 May 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (5)
Study on the dynamic characteristics of sand-laden suction vortex in the hydraulic machinery based on experimental test
Sediment-laden surface vortices in pump sump represent a three-phase flow, comprising gas, liquid, and solid phases, surpassing the complexity of clear water vortices, which has also more serious effect on the hydraulic machinery. In this paper, focusing on sediment-laden free surface vortices, a model experiment was employed to investigate their motion characteristics. The spatiotemporal evolution of sediment-laden vortices has been captured through three-dimensional velocity testing, revealing particle aggregation and dispersion patterns within vortex cores at various stages. Radial velocity within the vortex core accelerates the inward movement of particles, while axial velocity enhances their vertical transport. The scale of sandy vortices is larger than that of clear water vortices, approximately 1.2 times the size, and the rotational velocity within the vortex core is lower for sandy vortices, with maximum rotational velocities of 1.04 and 0.5 m/s, respectively. The maximum suction speed of the vortex is 6.1 times that of the initial stage, and the sediment-carrying capacity is 21 times greater. Finally, the mechanism and characteristics of vortex transporting sand and air are discussed, along with the detrimental effects of various sediment-carrying vortices on the sediment erosion of hydraulic machinery. The research findings of this paper have significant theoretical and engineering values.
- 1 May 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (5)
Study on the dynamic characteristics of sand-laden suction vortex in the hydraulic machinery based on experimental test
Sediment-laden surface vortices in pump sump represent a three-phase flow, comprising gas, liquid, and solid phases, surpassing the complexity of clear water vortices, which has also more serious effect on the hydraulic machinery. In this paper, focusing on sediment-laden free surface vortices, a model experiment was employed to investigate their motion characteristics. The spatiotemporal evolution of sediment-laden vortices has been captured through three-dimensional velocity testing, revealing particle aggregation and dispersion patterns within vortex cores at various stages. Radial velocity within the vortex core accelerates the inward movement of particles, while axial velocity enhances their vertical transport. The scale of sandy vortices is larger than that of clear water vortices, approximately 1.2 times the size, and the rotational velocity within the vortex core is lower for sandy vortices, with maximum rotational velocities of 1.04 and 0.5 m/s, respectively. The maximum suction speed of the vortex is 6.1 times that of the initial stage, and the sediment-carrying capacity is 21 times greater. Finally, the mechanism and characteristics of vortex transporting sand and air are discussed, along with the detrimental effects of various sediment-carrying vortices on the sediment erosion of hydraulic machinery. The research findings of this paper have significant theoretical and engineering values.
- 1 December 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (12)
A review of hydro-turbine unit rotor system dynamic behavior: Multi-field coupling of a three-dimensional model
The dynamic behavior of hydro-turbine rotor system is a complex multi-field and nonlinear problem, which has been studied by many researchers. The analysis of the rotor system dynamic characteristics is usually carried out based on the behavior analysis of bearings, hydraulics, electromagnetics, etc., while the thermo-elasto-hydrodynamic characteristics of bearings are extremely important to numerical accuracy. Therefore, this paper first summarizes the research progress in bearing lubrication performance, and further summarizes the research on hydro-turbine rotor system dynamic characteristics, including the modal characteristics and dynamic response characteristics. Finally, this paper summarizes the main research progress of the hydro-turbine rotor system and proposes possible directions in future research. Literature review shows that the hydro-turbine runners and bearings have achieved multi-field coupling analysis of three-dimensional (3D) models, and some work on multi-field coupling of rotor systems has been carried out. The transition of 3D multi-field coupling from single component to rotor system is significant to accurately predict the rotor system dynamic characteristics and the solution of engineering problems, which requires further in-depth research on the multi-field coupling theory, numerical methods, 3D model integrity, simulation software, etc., and the spatiotemporal synergy between multi-fields should be fully considered.
- 1 December 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (12)
A review of hydro-turbine unit rotor system dynamic behavior: Multi-field coupling of a three-dimensional model
The dynamic behavior of hydro-turbine rotor system is a complex multi-field and nonlinear problem, which has been studied by many researchers. The analysis of the rotor system dynamic characteristics is usually carried out based on the behavior analysis of bearings, hydraulics, electromagnetics, etc., while the thermo-elasto-hydrodynamic characteristics of bearings are extremely important to numerical accuracy. Therefore, this paper first summarizes the research progress in bearing lubrication performance, and further summarizes the research on hydro-turbine rotor system dynamic characteristics, including the modal characteristics and dynamic response characteristics. Finally, this paper summarizes the main research progress of the hydro-turbine rotor system and proposes possible directions in future research. Literature review shows that the hydro-turbine runners and bearings have achieved multi-field coupling analysis of three-dimensional (3D) models, and some work on multi-field coupling of rotor systems has been carried out. The transition of 3D multi-field coupling from single component to rotor system is significant to accurately predict the rotor system dynamic characteristics and the solution of engineering problems, which requires further in-depth research on the multi-field coupling theory, numerical methods, 3D model integrity, simulation software, etc., and the spatiotemporal synergy between multi-fields should be fully considered.
- 1 May 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (5)
The influence of installation deviation on the upper guide bearing thermo-hydrodynamic characteristics of a 1000 MW giant hydropower unit
The operating stability of guide bearings under load fluctuations in giant hydro turbines is a critical issue. As a crucial component supporting rotating machinery and enduring radial forces, guide bearings suffer from problems including rapid wear and unstable operation. In this study, a three-dimensional thermo-hydrodynamic model of the 1000 MW giant Francis turbine unit guide bearing is applied to analyze the oil film lubrication characteristics and flow in a turbine tank. The effects of installation deviations on the upper guide bearing are analyzed, and the results demonstrate that the cooler has little effect on the pressure and the velocity distribution within the oil film. A Q-criterion is defined to analyze the flow in the tank, and the results indicate that the high-velocity and strong-vortex regions are mainly distributed within the rotating oil line and the oil film region. In the oil tank, the velocity and vorticity are relatively low despite the presence of chaotic spiral vortices. The maximum values of the temperature and pressure within the oil film and the unbalanced radial force increase with the level of deviation. As a result, the temperature distribution becomes more uneven. The conclusions obtained in this paper can be used to guide engineering practice.
- 1 May 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (5)
The influence of installation deviation on the upper guide bearing thermo-hydrodynamic characteristics of a 1000 MW giant hydropower unit
The operating stability of guide bearings under load fluctuations in giant hydro turbines is a critical issue. As a crucial component supporting rotating machinery and enduring radial forces, guide bearings suffer from problems including rapid wear and unstable operation. In this study, a three-dimensional thermo-hydrodynamic model of the 1000 MW giant Francis turbine unit guide bearing is applied to analyze the oil film lubrication characteristics and flow in a turbine tank. The effects of installation deviations on the upper guide bearing are analyzed, and the results demonstrate that the cooler has little effect on the pressure and the velocity distribution within the oil film. A Q-criterion is defined to analyze the flow in the tank, and the results indicate that the high-velocity and strong-vortex regions are mainly distributed within the rotating oil line and the oil film region. In the oil tank, the velocity and vorticity are relatively low despite the presence of chaotic spiral vortices. The maximum values of the temperature and pressure within the oil film and the unbalanced radial force increase with the level of deviation. As a result, the temperature distribution becomes more uneven. The conclusions obtained in this paper can be used to guide engineering practice.
- 1 March 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (3)
Thermo-hydrodynamic lubrication and energy dissipation mechanism of a pump-turbine thrust bearing in load-rejection process
The dynamic behavior of the pump-turbine thrust bearing is important to the safety operation of the unit. This paper analyzed the lubrication and energy dissipation mechanism of pump-turbine thrust bearing during load-rejection based on the thermo-hydrodynamic model. The results show that the variation of the axial force and the maximum pad surface pressure is basically consistent with that of the inclination of the pad surface. The change of the friction loss is consistent with the change of rotational speed, while the change of pad surface temperature is affected by the combination of pad inclination and rotational speed. The chaotic flow in the oil tank is accompanied by different forms of vortices, such as Taylor vortices, vortex pairs, and Karman vortices, and results in a significant asymmetry in the pressure distribution. The flow in the bearing pad groove has an effect on the energy dissipation in the oil film. This paper provides a theoretical basis for the design and optimization of thrust bearings, and provides a reference for solving the problems of wear, oil mist, and other related problems of thrust bearings in engineering.
- 1 March 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (3)
Thermo-hydrodynamic lubrication and energy dissipation mechanism of a pump-turbine thrust bearing in load-rejection process
The dynamic behavior of the pump-turbine thrust bearing is important to the safety operation of the unit. This paper analyzed the lubrication and energy dissipation mechanism of pump-turbine thrust bearing during load-rejection based on the thermo-hydrodynamic model. The results show that the variation of the axial force and the maximum pad surface pressure is basically consistent with that of the inclination of the pad surface. The change of the friction loss is consistent with the change of rotational speed, while the change of pad surface temperature is affected by the combination of pad inclination and rotational speed. The chaotic flow in the oil tank is accompanied by different forms of vortices, such as Taylor vortices, vortex pairs, and Karman vortices, and results in a significant asymmetry in the pressure distribution. The flow in the bearing pad groove has an effect on the energy dissipation in the oil film. This paper provides a theoretical basis for the design and optimization of thrust bearings, and provides a reference for solving the problems of wear, oil mist, and other related problems of thrust bearings in engineering.
- Open Access
- 1 June 2022
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1037 (1) , 012003
EXPERIMENTAL AND CFD SIMULATION VALIDATION PERFORMANCE ANALYSIS OF FRANCIS TURBINE
Francis Turbines are designed to Extract hydraulic power as much as possible in hydro power plant stations. Performance analysis and selecting design of hydraulic turbines are two very essential aspects of any hydro power project which ensure the economical and efficient functioning of these hydro power plants.CFD simulation can provide us insight into field flow characteristics which will help us understand the design parameter and development of Francis turbine. The performance analyzed in different operating conditions with the help of numerical simulation and experimental testing. The various visualization techniques in numerically and Physically model testing for hydraulic performance with maximum-minimum and rated head and different flow rate analyses of the turbines are briefly discussed. These techniques can be provided efficiency and insight flow characteristics with different operating conditions of the Francis turbine. Efficiency is calculated 94% with Computational fluid dynamics simulation with an error of less than 0.7% compared with physical model testing. The numerically simulation and physical model testing are shown that feasibility for the optimal design of the hydraulic Francis turbine.
- 1 June 2022
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1037 (1) , 012003
Open AccessEXPERIMENTAL AND CFD SIMULATION VALIDATION PERFORMANCE ANALYSIS OF FRANCIS TURBINE
Francis Turbines are designed to Extract hydraulic power as much as possible in hydro power plant stations. Performance analysis and selecting design of hydraulic turbines are two very essential aspects of any hydro power project which ensure the economical and efficient functioning of these hydro power plants.CFD simulation can provide us insight into field flow characteristics which will help us understand the design parameter and development of Francis turbine. The performance analyzed in different operating conditions with the help of numerical simulation and experimental testing. The various visualization techniques in numerically and Physically model testing for hydraulic performance with maximum-minimum and rated head and different flow rate analyses of the turbines are briefly discussed. These techniques can be provided efficiency and insight flow characteristics with different operating conditions of the Francis turbine. Efficiency is calculated 94% with Computational fluid dynamics simulation with an error of less than 0.7% compared with physical model testing. The numerically simulation and physical model testing are shown that feasibility for the optimal design of the hydraulic Francis turbine.
- 10 May 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 236 (8) , 1533-1543
Effect of the pressure balance device on the flow characteristics of a pump-turbine
Pump-turbine plays a significant role in the pumped storage station, and it is troubled by unreasonable hydraulic thrust. Some pressure balance devices have been adopted to ensure the safety of the pump-turbine unit, but the effect mechanism has not been numerical studied. This paper establishes the CFD model of the flow passage of a pump-turbine, wherein the crown gap, band gap, pressure balance pipe, and the discharge ostium are considered. Then, the flow characteristics of the pump-turbine at four typical operating conditions in turbine mode are calculated in transient scheme, and the numerical results agree with the experimental results. Finally, the effect of the pressure balance pipe and the discharge ostium on the pressure pulsation and the hydraulic thrust is discussed. The results show that the pressure balance pipe causes the direction of the axial hydraulic thrust to change from downward to upward, and the discharge ostium helps reducing the axial hydraulic thrust to a reasonable range. The pressure balance pipe and the discharge ostium have little effect on the radial hydraulic thrust. The pressure pulsation analysis provides a basis for revealing the mechanism of the hydraulic thrust frequency, and the rotor-stator interaction frequency exists in the axial hydraulic thrust. This paper provides a deeper knowledge of the impact mechanism of the pressure balance pipe and discharge ostium on the flow characteristics of the pump-turbine, which could contribute to future designs of the pump-turbine units, and is helpful for improving the safety of the pumped storage unit.
- 10 May 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 236 (8) , 1533-1543
Effect of the pressure balance device on the flow characteristics of a pump-turbine
Pump-turbine plays a significant role in the pumped storage station, and it is troubled by unreasonable hydraulic thrust. Some pressure balance devices have been adopted to ensure the safety of the pump-turbine unit, but the effect mechanism has not been numerical studied. This paper establishes the CFD model of the flow passage of a pump-turbine, wherein the crown gap, band gap, pressure balance pipe, and the discharge ostium are considered. Then, the flow characteristics of the pump-turbine at four typical operating conditions in turbine mode are calculated in transient scheme, and the numerical results agree with the experimental results. Finally, the effect of the pressure balance pipe and the discharge ostium on the pressure pulsation and the hydraulic thrust is discussed. The results show that the pressure balance pipe causes the direction of the axial hydraulic thrust to change from downward to upward, and the discharge ostium helps reducing the axial hydraulic thrust to a reasonable range. The pressure balance pipe and the discharge ostium have little effect on the radial hydraulic thrust. The pressure pulsation analysis provides a basis for revealing the mechanism of the hydraulic thrust frequency, and the rotor-stator interaction frequency exists in the axial hydraulic thrust. This paper provides a deeper knowledge of the impact mechanism of the pressure balance pipe and discharge ostium on the flow characteristics of the pump-turbine, which could contribute to future designs of the pump-turbine units, and is helpful for improving the safety of the pumped storage unit.
- 18 November 2021
- Published by Emerald Publishing in Engineering Computations
- Vol. 39 (4) , 1511-1533
Transient thermo-elasto-hydrodynamic analysis of a bidirectional thrust bearing in start-up and shutdown processes
Purpose: The purpose of this paper is to reveal the transient thermo-elasto-hydrodynamic lubrication mechanism of a bidirectional thrust bearing in a pumped-storage unit, and to propose the transient simulation method of two-way fluid-solid-thermal interaction of thrust bearing.Design/methodology/approach: The transient fluid-solid-thermal interaction method is used to simulate the three-dimensional lubrication of the thrust bearing, during the start-up and shutdown process of a pumped storage unit. A pad including an oil hole is modelled to analyze the temporal variation of lubrication characteristics, such as the film pressure, thickness and temperature, during the transient operation process.Findings: The injection of the high-pressure oil sufficiently affects the lubrication characteristics on film, in which the hysteresis phenomena were found between the start-up and shutdown possess.Originality/value: This paper reveals the transient lubrication mechanism of tilting pad in a thrust bearing, by means of transient fluid-solid-thermal interaction method. Lubrication characteristics are simulated without assuming the temperature relationship between the oil film inlet and the outlet and the heat transfer on the pad free surface. This paper provides a theoretical basis for the safe design and stable operation of thrust bearings.
- 18 November 2021
- Published by Emerald Publishing in Engineering Computations
- Vol. 39 (4) , 1511-1533
Transient thermo-elasto-hydrodynamic analysis of a bidirectional thrust bearing in start-up and shutdown processes
Purpose: The purpose of this paper is to reveal the transient thermo-elasto-hydrodynamic lubrication mechanism of a bidirectional thrust bearing in a pumped-storage unit, and to propose the transient simulation method of two-way fluid-solid-thermal interaction of thrust bearing.Design/methodology/approach: The transient fluid-solid-thermal interaction method is used to simulate the three-dimensional lubrication of the thrust bearing, during the start-up and shutdown process of a pumped storage unit. A pad including an oil hole is modelled to analyze the temporal variation of lubrication characteristics, such as the film pressure, thickness and temperature, during the transient operation process.Findings: The injection of the high-pressure oil sufficiently affects the lubrication characteristics on film, in which the hysteresis phenomena were found between the start-up and shutdown possess.Originality/value: This paper reveals the transient lubrication mechanism of tilting pad in a thrust bearing, by means of transient fluid-solid-thermal interaction method. Lubrication characteristics are simulated without assuming the temperature relationship between the oil film inlet and the outlet and the heat transfer on the pad free surface. This paper provides a theoretical basis for the safe design and stable operation of thrust bearings.
- Open Access
- 1 January 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 627 (1) , 012015
Numerical Analysis of Rotor Dynamics of Dredge Pump Shafting
The operating condition of dredge pump is highly complicated, a technical issue is the shaft vibration problems, which has great effects on the operation safety and stability of pumps. This paper introduces a mathematical model of rotor dynamics for the dredge pump, which is used to numerically investigate critical speeds and mode shapes of the pump shaft under different bearing stiffness and damping. The effects of bearing stiffness and damping on shafting vibration characteristics are considered. The results show that the stiffness has great effect on 1st and 3rd order critical speed and the damping effect can be ignored. The stiffness has little effect on shafting axial and torsional natural frequency, but has great effect on lateral natural frequency. The analysis method of rotor dynamics dealt with in this paper can provide a foundation for the design of dredge pump shafting.
- 1 January 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 627 (1) , 012015
Open AccessNumerical Analysis of Rotor Dynamics of Dredge Pump Shafting
The operating condition of dredge pump is highly complicated, a technical issue is the shaft vibration problems, which has great effects on the operation safety and stability of pumps. This paper introduces a mathematical model of rotor dynamics for the dredge pump, which is used to numerically investigate critical speeds and mode shapes of the pump shaft under different bearing stiffness and damping. The effects of bearing stiffness and damping on shafting vibration characteristics are considered. The results show that the stiffness has great effect on 1st and 3rd order critical speed and the damping effect can be ignored. The stiffness has little effect on shafting axial and torsional natural frequency, but has great effect on lateral natural frequency. The analysis method of rotor dynamics dealt with in this paper can provide a foundation for the design of dredge pump shafting.