A. Samy Saadeldin
A. Samy Saadeldin has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Salah Sabry Ahmed Obayya
Centre for Photonics and Smart Materials, Zewail City of Science, Technology and Innovation, 6th of October City, Giza, Egypt
7 shared publications - Mohamed Farhat O. Hameed
Center for Nanotechnology, Zewail City of Science, Technology and Innovation, 6th of October City, Giza, Egypt
6 shared publications Essam M. A. Elkaramany
Engineering Mathematics and Physics Department, Faculty of Engineering, Cairo University, Giza, Egypt
5 shared publicationsAdnan M. Amr
Electronics and Communication Engineering Department, Akhbar Elyom Academy, 6th of October City, Giza, Egypt
1 shared publicationAmr M. Sayed
Electronics and Communication Engineering Department, Akhbar Elyom Academy, 6th of October City, Giza, Egypt
1 shared publicationEssam M.A. Elkaramany
Engineering Mathematics and Physics Department, Cairo University, Giza 12211, Egypt
1 shared publication
Latest Publications
- 28 October 2024
- Published by Springer Nature in Journal of Infrared, Millimeter, and Terahertz Waves
- Vol. 45 (11-12) , 1010-1028
Ultra-Wideband Flexible Metamaterial Absorber Based on Silver Nanoparticle Using Inkjet Printing
- 28 October 2024
- Published by Springer Nature in Journal of Infrared, Millimeter, and Terahertz Waves
- Vol. 45 (11-12) , 1010-1028
Ultra-Wideband Flexible Metamaterial Absorber Based on Silver Nanoparticle Using Inkjet Printing
- Open Access
- 11 September 2023
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 34 (26) , 1-11
Wideband ultrathin and polarization insensitive metamaterial absorber for Ku-band applications
In this paper, wideband, and ultrathin metamaterial absorber is proposed, analyzed and fabricated for Ku-band applications. The reported absorber has a nearly perfect absorptivity above 90% covering the entire Ku band (12–20 GHz) at normal incidence for both transverse electric and transverse magnetic polarization. This is due to the supported electric and magnetic resonances simultaneously. Consequently, the effective permittivity and permeability can be designed to obtain impedance matching with free space. This leads to the absorption of the entire incident energy in the metamaterial absorber. The suggested structure also shows a good absorption response (above 80%) under oblique incidence (from 0 to 50°). Therefore, the proposed absorber represents a good potential for Ku-band applications.
- 11 September 2023
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 34 (26) , 1-11
Open AccessWideband ultrathin and polarization insensitive metamaterial absorber for Ku-band applications
In this paper, wideband, and ultrathin metamaterial absorber is proposed, analyzed and fabricated for Ku-band applications. The reported absorber has a nearly perfect absorptivity above 90% covering the entire Ku band (12–20 GHz) at normal incidence for both transverse electric and transverse magnetic polarization. This is due to the supported electric and magnetic resonances simultaneously. Consequently, the effective permittivity and permeability can be designed to obtain impedance matching with free space. This leads to the absorption of the entire incident energy in the metamaterial absorber. The suggested structure also shows a good absorption response (above 80%) under oblique incidence (from 0 to 50°). Therefore, the proposed absorber represents a good potential for Ku-band applications.
- Top Cited Papers
- 22 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 19 (18) , 7993-7999
Highly Sensitive Terahertz Metamaterial Sensor
A novel design of nearly perfect metamaterial absorber is proposed and analyzed for terahertz sensing applications. The full vectorial finite element method is used to simulate and analyze the reported design. The suggested structure is based on increasing the confinement of both electric and magnetic fields simultaneously at the resonance frequency. Therefore, an absorptivity of 0.99 is achieved at 2.249 THz with a narrow resonant peak and Q-factor of 22.05. The resonance frequency is sensitive to the surrounding medium refractive index at fixed analyte thickness. Consequently, the reported metamaterial design can be used as a refractive index (RI) sensor with high sensitivity of 300 GHz/RIU and figure of merit (FoM) of 2.94 through RI range from 1.0 to 1.39 at analyte thickness of 1.0 μm. Further, the proposed sensor has a sensitivity of 23.7 GHz/μm for the detection of the sensing layer thickness variation at fixed analyte RI of 1.35. It is worth noting that most of the biomedical samples have refractive index range from 1.3 to 1.39. Therefore, the reported sensor can be used for biomedical applications with high sensitivity.
- 22 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 19 (18) , 7993-7999
Top Cited PapersHighly Sensitive Terahertz Metamaterial Sensor
A novel design of nearly perfect metamaterial absorber is proposed and analyzed for terahertz sensing applications. The full vectorial finite element method is used to simulate and analyze the reported design. The suggested structure is based on increasing the confinement of both electric and magnetic fields simultaneously at the resonance frequency. Therefore, an absorptivity of 0.99 is achieved at 2.249 THz with a narrow resonant peak and Q-factor of 22.05. The resonance frequency is sensitive to the surrounding medium refractive index at fixed analyte thickness. Consequently, the reported metamaterial design can be used as a refractive index (RI) sensor with high sensitivity of 300 GHz/RIU and figure of merit (FoM) of 2.94 through RI range from 1.0 to 1.39 at analyte thickness of 1.0 μm. Further, the proposed sensor has a sensitivity of 23.7 GHz/μm for the detection of the sensing layer thickness variation at fixed analyte RI of 1.35. It is worth noting that most of the biomedical samples have refractive index range from 1.3 to 1.39. Therefore, the reported sensor can be used for biomedical applications with high sensitivity.
- 14 June 2018
- Published by Springer Nature
- p. 73-90
Introduction to Silicon Photonics
- 4 May 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10672, 90
Detection of DNA hybridization by hybrid alternative plasmonic biosensor
In order to detect DNA hybridization with label free and high sensitivity, a hybrid alternative plasmonic slot waveguide (HAPSW) biosensor based on silicon-on-insulator (SOI) is proposed and analyzed. The reported design increases the light interaction with the sensing region by using a slot-waveguide along with titanium nitride as an alternative plasmonic material. The suggested biosensor can detect the slightest change in the analyte refractive index with high sensitivity due to an ultra-high optical confinement in the low-index regions caused by the high index contrast and plasmonic enhancement. The effective index, normalized power confinement, and sensitivity are analyzed for the detection of the DNA hybridization. The simulation results are obtained using full vectorial finite element method (FVFEM). The suggested biosensor has high sensitivity of 1190 nm/RIU (refractive index unit) for DNA hybridization detection, which is very high relative to those reported in the literature to the best of our knowledge.
- 4 May 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10672, 90
Detection of DNA hybridization by hybrid alternative plasmonic biosensor
In order to detect DNA hybridization with label free and high sensitivity, a hybrid alternative plasmonic slot waveguide (HAPSW) biosensor based on silicon-on-insulator (SOI) is proposed and analyzed. The reported design increases the light interaction with the sensing region by using a slot-waveguide along with titanium nitride as an alternative plasmonic material. The suggested biosensor can detect the slightest change in the analyte refractive index with high sensitivity due to an ultra-high optical confinement in the low-index regions caused by the high index contrast and plasmonic enhancement. The effective index, normalized power confinement, and sensitivity are analyzed for the detection of the DNA hybridization. The simulation results are obtained using full vectorial finite element method (FVFEM). The suggested biosensor has high sensitivity of 1190 nm/RIU (refractive index unit) for DNA hybridization detection, which is very high relative to those reported in the literature to the best of our knowledge.
- 23 April 2014
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 28 (10) , 1246-1256
Resonant frequencies of arbitrarily shaped microstrip patch antennas using two-dimensional circuit model
- 23 April 2014
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 28 (10) , 1246-1256
Resonant frequencies of arbitrarily shaped microstrip patch antennas using two-dimensional circuit model