Monika Bociarska
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Monika Bociarska has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Dariusz Wójcik
Institute of Geophysics, Polish Academy of Sciences, Ks. Janusza 64, PL-01-452 Warszawa, Poland
11 shared publications Piotr Środa
Institute of Geophysics, Polish Academy of Sciences, Ks. Janusza 64, PL-01-452 Warszawa, Poland
7 shared publicationsWeronika Materkowska
Department of Seismic Lithospheric Research, Institute of Geophysics, Polish Academy of Science, Warsaw, 01-452, Poland
6 shared publications- Raimo Lahtinen
Jalavakuja 4 F8, 02760 Espoo, Finland
5 shared publications - Tomasz Janik
Institute of Geophysics, Polish Academy of Sciences, Ks. Janusza 64, 01-452 Warszawa, Poland
5 shared publications Julia Rewers
Department of Seismic Lithospheric Research, Institute of Geophysics Polish Academy of Sciences, Warszawa, 01-452, Poland
4 shared publications
Latest Publications
- Open Access
- 30 July 2025
- Published by Copernicus GmbH in Solid Earth
- Vol. 16 (7) , 727-759
Revisit of the Fennoscandian Shield along the UPPLAND seismic profile: competitive velocity models
This paper presents a comprehensive re-analysis of seismic data collected along the UPPLAND profile in the Fennoscandian Shield, focusing on the competitive velocity models for P-wave ( V p ) and S-wave ( V s ) velocities and the Vp/Vs ratio. The initial data collection was conducted in 2017, and the first interpretation was published by Buntin et al. (2021). This study reveals that, while both the previous and current models exhibit similar velocities up to a depth of approximately 35 km, significant discrepancies arise in the lower-crust and upper-mantle velocities and in the depth of the Moho boundary. The preferred model obtained by 2D forward ray-tracing modelling indicates V p values of approximately 7.05–7.17 km s −1 in the lower crust (LC) and 8.05 km s −1 in the upper mantle (UM), contrasting with the earlier model's values of 7.25–7.4 and 8.0–8.5 km s −1 , respectively. The Moho depth varies between 43–50 km in the new model, compared to 45–52 km in the previous one. In addition, we present two, possibly overlapping, tectonic interpretations to explain the new model. The main crustal structure formed during W-vergent crustal stacking at ca. 1.86 Ga, followed by N–S crustal shortening at 1.82–1.80 Ga. The bulging of the high-velocity upper mantle is either related to extension at 1.89–1.87 Ga in a continental back-arc or was formed during extensional magmatism at 1.6/1.7/1.8 Ga. The findings highlight the complexities in determining lower-crustal and upper-mantle properties from ambiguous seismic data and suggest that the interpretations presented may require a more cautious approach, allowing alternative explanations.
- 30 July 2025
- Published by Copernicus GmbH in Solid Earth
- Vol. 16 (7) , 727-759
Open AccessRevisit of the Fennoscandian Shield along the UPPLAND seismic profile: competitive velocity models
This paper presents a comprehensive re-analysis of seismic data collected along the UPPLAND profile in the Fennoscandian Shield, focusing on the competitive velocity models for P-wave ( V p ) and S-wave ( V s ) velocities and the Vp/Vs ratio. The initial data collection was conducted in 2017, and the first interpretation was published by Buntin et al. (2021). This study reveals that, while both the previous and current models exhibit similar velocities up to a depth of approximately 35 km, significant discrepancies arise in the lower-crust and upper-mantle velocities and in the depth of the Moho boundary. The preferred model obtained by 2D forward ray-tracing modelling indicates V p values of approximately 7.05–7.17 km s −1 in the lower crust (LC) and 8.05 km s −1 in the upper mantle (UM), contrasting with the earlier model's values of 7.25–7.4 and 8.0–8.5 km s −1 , respectively. The Moho depth varies between 43–50 km in the new model, compared to 45–52 km in the previous one. In addition, we present two, possibly overlapping, tectonic interpretations to explain the new model. The main crustal structure formed during W-vergent crustal stacking at ca. 1.86 Ga, followed by N–S crustal shortening at 1.82–1.80 Ga. The bulging of the high-velocity upper mantle is either related to extension at 1.89–1.87 Ga in a continental back-arc or was formed during extensional magmatism at 1.6/1.7/1.8 Ga. The findings highlight the complexities in determining lower-crustal and upper-mantle properties from ambiguous seismic data and suggest that the interpretations presented may require a more cautious approach, allowing alternative explanations.
- Open Access
- 18 April 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-38
Reply on RC2
The manuscript presents a comprehensive re-analysis of seismic data collected along the UPPLAND profile in the Fennoscandian Shield, focusing on the competitive velocity models for P-wave (Vp) and S-wave (Vs) velocities, as well as the Vp/Vs ratio. The initial data collection was conducted in 2017, and the first interpretation was published by Buntin et al. in 2021. This study reveals that while both the previous and current models exhibit similar velocities up to a depth of approximately 35 km, significant discrepancies arise in the lower crust and upper mantle velocities, as well as the depth of the Moho boundary. The preferred model indicates Vp values of approximately 7.05–7.17 km s-1 in the lower crust and 8.05 km s-1 in the upper mantle, contrasting with the earlier model's values of 7.25–7.4 km s-1 and 8.0–8.5 km s-1, respectively. The Moho depth varies between 43–50 km in the new model, compared to 45–52 km in the previous one. In addition, we present two, possibly overlapping, tectonic interpretations to explain the new model. The main crustal structure has formed during W-vergent crustal stacking at ca. 1.86 Ga, followed by N–S crustal shortening at 1.82–1.80 Ga. The bulging of the high-velocity upper mantle is either related to extension at 1.89–1.87 Ga in a continental back-arc or during extensional magmatism at 1.7/1.8 Ga. The findings highlight the complexities in determining lower crustal and upper mantle properties from ambiguous seismic data and suggest that the interpretations presented may require a more cautious approach, allowing for alternative explanations.
- 18 April 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-38
Open AccessReply on RC2
The manuscript presents a comprehensive re-analysis of seismic data collected along the UPPLAND profile in the Fennoscandian Shield, focusing on the competitive velocity models for P-wave (Vp) and S-wave (Vs) velocities, as well as the Vp/Vs ratio. The initial data collection was conducted in 2017, and the first interpretation was published by Buntin et al. in 2021. This study reveals that while both the previous and current models exhibit similar velocities up to a depth of approximately 35 km, significant discrepancies arise in the lower crust and upper mantle velocities, as well as the depth of the Moho boundary. The preferred model indicates Vp values of approximately 7.05–7.17 km s-1 in the lower crust and 8.05 km s-1 in the upper mantle, contrasting with the earlier model's values of 7.25–7.4 km s-1 and 8.0–8.5 km s-1, respectively. The Moho depth varies between 43–50 km in the new model, compared to 45–52 km in the previous one. In addition, we present two, possibly overlapping, tectonic interpretations to explain the new model. The main crustal structure has formed during W-vergent crustal stacking at ca. 1.86 Ga, followed by N–S crustal shortening at 1.82–1.80 Ga. The bulging of the high-velocity upper mantle is either related to extension at 1.89–1.87 Ga in a continental back-arc or during extensional magmatism at 1.7/1.8 Ga. The findings highlight the complexities in determining lower crustal and upper mantle properties from ambiguous seismic data and suggest that the interpretations presented may require a more cautious approach, allowing for alternative explanations.
- Open Access
- 15 April 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-38
Comment on egusphere-2025-742
The manuscript presents a comprehensive re-analysis of seismic data collected along the UPPLAND profile in the Fennoscandian Shield, focusing on the competitive velocity models for P-wave (Vp) and S-wave (Vs) velocities, as well as the Vp/Vs ratio. The initial data collection was conducted in 2017, and the first interpretation was published by Buntin et al. in 2021. This study reveals that while both the previous and current models exhibit similar velocities up to a depth of approximately 35 km, significant discrepancies arise in the lower crust and upper mantle velocities, as well as the depth of the Moho boundary. The preferred model indicates Vp values of approximately 7.05–7.17 km s-1 in the lower crust and 8.05 km s-1 in the upper mantle, contrasting with the earlier model's values of 7.25–7.4 km s-1 and 8.0–8.5 km s-1, respectively. The Moho depth varies between 43–50 km in the new model, compared to 45–52 km in the previous one. In addition, we present two, possibly overlapping, tectonic interpretations to explain the new model. The main crustal structure has formed during W-vergent crustal stacking at ca. 1.86 Ga, followed by N–S crustal shortening at 1.82–1.80 Ga. The bulging of the high-velocity upper mantle is either related to extension at 1.89–1.87 Ga in a continental back-arc or during extensional magmatism at 1.7/1.8 Ga. The findings highlight the complexities in determining lower crustal and upper mantle properties from ambiguous seismic data and suggest that the interpretations presented may require a more cautious approach, allowing for alternative explanations.
- 15 April 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-38
Open AccessComment on egusphere-2025-742
The manuscript presents a comprehensive re-analysis of seismic data collected along the UPPLAND profile in the Fennoscandian Shield, focusing on the competitive velocity models for P-wave (Vp) and S-wave (Vs) velocities, as well as the Vp/Vs ratio. The initial data collection was conducted in 2017, and the first interpretation was published by Buntin et al. in 2021. This study reveals that while both the previous and current models exhibit similar velocities up to a depth of approximately 35 km, significant discrepancies arise in the lower crust and upper mantle velocities, as well as the depth of the Moho boundary. The preferred model indicates Vp values of approximately 7.05–7.17 km s-1 in the lower crust and 8.05 km s-1 in the upper mantle, contrasting with the earlier model's values of 7.25–7.4 km s-1 and 8.0–8.5 km s-1, respectively. The Moho depth varies between 43–50 km in the new model, compared to 45–52 km in the previous one. In addition, we present two, possibly overlapping, tectonic interpretations to explain the new model. The main crustal structure has formed during W-vergent crustal stacking at ca. 1.86 Ga, followed by N–S crustal shortening at 1.82–1.80 Ga. The bulging of the high-velocity upper mantle is either related to extension at 1.89–1.87 Ga in a continental back-arc or during extensional magmatism at 1.7/1.8 Ga. The findings highlight the complexities in determining lower crustal and upper mantle properties from ambiguous seismic data and suggest that the interpretations presented may require a more cautious approach, allowing for alternative explanations.
- Open Access
- 14 April 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-38
Reply on RC1
The manuscript presents a comprehensive re-analysis of seismic data collected along the UPPLAND profile in the Fennoscandian Shield, focusing on the competitive velocity models for P-wave (Vp) and S-wave (Vs) velocities, as well as the Vp/Vs ratio. The initial data collection was conducted in 2017, and the first interpretation was published by Buntin et al. in 2021. This study reveals that while both the previous and current models exhibit similar velocities up to a depth of approximately 35 km, significant discrepancies arise in the lower crust and upper mantle velocities, as well as the depth of the Moho boundary. The preferred model indicates Vp values of approximately 7.05–7.17 km s-1 in the lower crust and 8.05 km s-1 in the upper mantle, contrasting with the earlier model's values of 7.25–7.4 km s-1 and 8.0–8.5 km s-1, respectively. The Moho depth varies between 43–50 km in the new model, compared to 45–52 km in the previous one. In addition, we present two, possibly overlapping, tectonic interpretations to explain the new model. The main crustal structure has formed during W-vergent crustal stacking at ca. 1.86 Ga, followed by N–S crustal shortening at 1.82–1.80 Ga. The bulging of the high-velocity upper mantle is either related to extension at 1.89–1.87 Ga in a continental back-arc or during extensional magmatism at 1.7/1.8 Ga. The findings highlight the complexities in determining lower crustal and upper mantle properties from ambiguous seismic data and suggest that the interpretations presented may require a more cautious approach, allowing for alternative explanations.
- 14 April 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-38
Open AccessReply on RC1
The manuscript presents a comprehensive re-analysis of seismic data collected along the UPPLAND profile in the Fennoscandian Shield, focusing on the competitive velocity models for P-wave (Vp) and S-wave (Vs) velocities, as well as the Vp/Vs ratio. The initial data collection was conducted in 2017, and the first interpretation was published by Buntin et al. in 2021. This study reveals that while both the previous and current models exhibit similar velocities up to a depth of approximately 35 km, significant discrepancies arise in the lower crust and upper mantle velocities, as well as the depth of the Moho boundary. The preferred model indicates Vp values of approximately 7.05–7.17 km s-1 in the lower crust and 8.05 km s-1 in the upper mantle, contrasting with the earlier model's values of 7.25–7.4 km s-1 and 8.0–8.5 km s-1, respectively. The Moho depth varies between 43–50 km in the new model, compared to 45–52 km in the previous one. In addition, we present two, possibly overlapping, tectonic interpretations to explain the new model. The main crustal structure has formed during W-vergent crustal stacking at ca. 1.86 Ga, followed by N–S crustal shortening at 1.82–1.80 Ga. The bulging of the high-velocity upper mantle is either related to extension at 1.89–1.87 Ga in a continental back-arc or during extensional magmatism at 1.7/1.8 Ga. The findings highlight the complexities in determining lower crustal and upper mantle properties from ambiguous seismic data and suggest that the interpretations presented may require a more cautious approach, allowing for alternative explanations.
- Open Access
- 27 February 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-38
Revisit of the Fennoscandian Shield along the UPPLAND seismic profile: competitive velocity models
The manuscript presents a comprehensive re-analysis of seismic data collected along the UPPLAND profile in the Fennoscandian Shield, focusing on the competitive velocity models for P-wave (Vp) and S-wave (Vs) velocities, as well as the Vp/Vs ratio. The initial data collection was conducted in 2017, and the first interpretation was published by Buntin et al. in 2021. This study reveals that while both the previous and current models exhibit similar velocities up to a depth of approximately 35 km, significant discrepancies arise in the lower crust and upper mantle velocities, as well as the depth of the Moho boundary. The preferred model indicates Vp values of approximately 7.05–7.17 km s-1 in the lower crust and 8.05 km s-1 in the upper mantle, contrasting with the earlier model's values of 7.25–7.4 km s-1 and 8.0–8.5 km s-1, respectively. The Moho depth varies between 43–50 km in the new model, compared to 45–52 km in the previous one. In addition, we present two, possibly overlapping, tectonic interpretations to explain the new model. The main crustal structure has formed during W-vergent crustal stacking at ca. 1.86 Ga, followed by N–S crustal shortening at 1.82–1.80 Ga. The bulging of the high-velocity upper mantle is either related to extension at 1.89–1.87 Ga in a continental back-arc or during extensional magmatism at 1.7/1.8 Ga. The findings highlight the complexities in determining lower crustal and upper mantle properties from ambiguous seismic data and suggest that the interpretations presented may require a more cautious approach, allowing for alternative explanations.
- 27 February 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-38
Open AccessRevisit of the Fennoscandian Shield along the UPPLAND seismic profile: competitive velocity models
The manuscript presents a comprehensive re-analysis of seismic data collected along the UPPLAND profile in the Fennoscandian Shield, focusing on the competitive velocity models for P-wave (Vp) and S-wave (Vs) velocities, as well as the Vp/Vs ratio. The initial data collection was conducted in 2017, and the first interpretation was published by Buntin et al. in 2021. This study reveals that while both the previous and current models exhibit similar velocities up to a depth of approximately 35 km, significant discrepancies arise in the lower crust and upper mantle velocities, as well as the depth of the Moho boundary. The preferred model indicates Vp values of approximately 7.05–7.17 km s-1 in the lower crust and 8.05 km s-1 in the upper mantle, contrasting with the earlier model's values of 7.25–7.4 km s-1 and 8.0–8.5 km s-1, respectively. The Moho depth varies between 43–50 km in the new model, compared to 45–52 km in the previous one. In addition, we present two, possibly overlapping, tectonic interpretations to explain the new model. The main crustal structure has formed during W-vergent crustal stacking at ca. 1.86 Ga, followed by N–S crustal shortening at 1.82–1.80 Ga. The bulging of the high-velocity upper mantle is either related to extension at 1.89–1.87 Ga in a continental back-arc or during extensional magmatism at 1.7/1.8 Ga. The findings highlight the complexities in determining lower crustal and upper mantle properties from ambiguous seismic data and suggest that the interpretations presented may require a more cautious approach, allowing for alternative explanations.
- Open Access
- 2 September 2021
- Published by Copernicus GmbH in Geoscientific Instrumentation, Methods and Data Systems
- Vol. 10 (2) , 183-202
Passive seismic experiment “AniMaLS” in the Polish Sudetes (NE Variscides)
The paper presents information about the seismic experiment “AniMaLS” which aims to provide a new insight into the crust and upper mantle structure beneath the Polish Sudetes (NE margin of the Variscan orogen). The seismic network composed of 23 temporary broadband stations was operated continuously for about 2 years (October 2017 to October 2019). The dataset was complemented by records from eight permanent stations located in the study area and in the vicinity. The stations were deployed with an inter-station spacing of approximately 25–30 km. As a result, recordings of local, regional and teleseismic events were obtained. We describe the aims and motivation of the project, the station deployment procedure, as well as the characteristics of the temporary seismic network and of the permanent stations. Furthermore, this paper includes a description of important issues like data transmission setup, status monitoring systems, data quality control, near-surface geological structure beneath stations and related site effects, etc. Special attention was paid to verification of correct orientation of the sensors. The obtained dataset will be analysed using several seismic interpretation methods, including analysis of seismic anisotropy parameters, with the objective of extending knowledge about the lithospheric and sublithospheric structure and the tectonic evolution of the study area.
- 2 September 2021
- Published by Copernicus GmbH in Geoscientific Instrumentation, Methods and Data Systems
- Vol. 10 (2) , 183-202
Open AccessPassive seismic experiment “AniMaLS” in the Polish Sudetes (NE Variscides)
The paper presents information about the seismic experiment “AniMaLS” which aims to provide a new insight into the crust and upper mantle structure beneath the Polish Sudetes (NE margin of the Variscan orogen). The seismic network composed of 23 temporary broadband stations was operated continuously for about 2 years (October 2017 to October 2019). The dataset was complemented by records from eight permanent stations located in the study area and in the vicinity. The stations were deployed with an inter-station spacing of approximately 25–30 km. As a result, recordings of local, regional and teleseismic events were obtained. We describe the aims and motivation of the project, the station deployment procedure, as well as the characteristics of the temporary seismic network and of the permanent stations. Furthermore, this paper includes a description of important issues like data transmission setup, status monitoring systems, data quality control, near-surface geological structure beneath stations and related site effects, etc. Special attention was paid to verification of correct orientation of the sensors. The obtained dataset will be analysed using several seismic interpretation methods, including analysis of seismic anisotropy parameters, with the objective of extending knowledge about the lithospheric and sublithospheric structure and the tectonic evolution of the study area.
- Open Access
- 1 July 2021
- Published by Copernicus GmbH
- p. 1-28
Reply on RC3
The paper presents information about the seismic experiment AniMaLS which aims to provide a new insight into the crustal and upper mantle structure beneath the Polish Sudetes (NE margin of the Variscan orogen). The seismic array composed of 23 temporary broadband stations was operating continuously for ~2 years (October 2017 and October 2019). The dataset was complemented by records from 8 permanent stations located in the study area and in the vicinity. The stations were deployed with inter-station spacing of approximately 25–30 km. As a result, good quality recordings of local, regional and teleseismic events were obtained. We describe the aims and motivation of the project, the stations deployment procedure, as well as the characteristics of the temporary seismic array and of the permanent stations. Furthermore, this paper includes a description of important issues like: data transmission set-up, status monitoring systems, data quality control, near-surface geological structure beneath stations and related site effects etc. Special attention was paid to verification of correct orientation of the sensors. The obtained data set will be modelled using several seismic interpretation methods, including analysis of seismic anisotropy parameters, with the objective of extending knowledge about the lithospheric and sub-lithospheric structure and the tectonic evolution of the study area.
- 1 July 2021
- Published by Copernicus GmbH
- p. 1-28
Open AccessReply on RC3
The paper presents information about the seismic experiment AniMaLS which aims to provide a new insight into the crustal and upper mantle structure beneath the Polish Sudetes (NE margin of the Variscan orogen). The seismic array composed of 23 temporary broadband stations was operating continuously for ~2 years (October 2017 and October 2019). The dataset was complemented by records from 8 permanent stations located in the study area and in the vicinity. The stations were deployed with inter-station spacing of approximately 25–30 km. As a result, good quality recordings of local, regional and teleseismic events were obtained. We describe the aims and motivation of the project, the stations deployment procedure, as well as the characteristics of the temporary seismic array and of the permanent stations. Furthermore, this paper includes a description of important issues like: data transmission set-up, status monitoring systems, data quality control, near-surface geological structure beneath stations and related site effects etc. Special attention was paid to verification of correct orientation of the sensors. The obtained data set will be modelled using several seismic interpretation methods, including analysis of seismic anisotropy parameters, with the objective of extending knowledge about the lithospheric and sub-lithospheric structure and the tectonic evolution of the study area.
- Open Access
- 1 July 2021
- Published by Copernicus GmbH
- p. 1-28
Reply on RC3
The paper presents information about the seismic experiment AniMaLS which aims to provide a new insight into the crustal and upper mantle structure beneath the Polish Sudetes (NE margin of the Variscan orogen). The seismic array composed of 23 temporary broadband stations was operating continuously for ~2 years (October 2017 and October 2019). The dataset was complemented by records from 8 permanent stations located in the study area and in the vicinity. The stations were deployed with inter-station spacing of approximately 25–30 km. As a result, good quality recordings of local, regional and teleseismic events were obtained. We describe the aims and motivation of the project, the stations deployment procedure, as well as the characteristics of the temporary seismic array and of the permanent stations. Furthermore, this paper includes a description of important issues like: data transmission set-up, status monitoring systems, data quality control, near-surface geological structure beneath stations and related site effects etc. Special attention was paid to verification of correct orientation of the sensors. The obtained data set will be modelled using several seismic interpretation methods, including analysis of seismic anisotropy parameters, with the objective of extending knowledge about the lithospheric and sub-lithospheric structure and the tectonic evolution of the study area.
- 1 July 2021
- Published by Copernicus GmbH
- p. 1-28
Open AccessReply on RC3
The paper presents information about the seismic experiment AniMaLS which aims to provide a new insight into the crustal and upper mantle structure beneath the Polish Sudetes (NE margin of the Variscan orogen). The seismic array composed of 23 temporary broadband stations was operating continuously for ~2 years (October 2017 and October 2019). The dataset was complemented by records from 8 permanent stations located in the study area and in the vicinity. The stations were deployed with inter-station spacing of approximately 25–30 km. As a result, good quality recordings of local, regional and teleseismic events were obtained. We describe the aims and motivation of the project, the stations deployment procedure, as well as the characteristics of the temporary seismic array and of the permanent stations. Furthermore, this paper includes a description of important issues like: data transmission set-up, status monitoring systems, data quality control, near-surface geological structure beneath stations and related site effects etc. Special attention was paid to verification of correct orientation of the sensors. The obtained data set will be modelled using several seismic interpretation methods, including analysis of seismic anisotropy parameters, with the objective of extending knowledge about the lithospheric and sub-lithospheric structure and the tectonic evolution of the study area.
- Open Access
- 1 July 2021
- Published by Copernicus GmbH
- p. 1-28
Reply on RC1
The paper presents information about the seismic experiment AniMaLS which aims to provide a new insight into the crustal and upper mantle structure beneath the Polish Sudetes (NE margin of the Variscan orogen). The seismic array composed of 23 temporary broadband stations was operating continuously for ~2 years (October 2017 and October 2019). The dataset was complemented by records from 8 permanent stations located in the study area and in the vicinity. The stations were deployed with inter-station spacing of approximately 25–30 km. As a result, good quality recordings of local, regional and teleseismic events were obtained. We describe the aims and motivation of the project, the stations deployment procedure, as well as the characteristics of the temporary seismic array and of the permanent stations. Furthermore, this paper includes a description of important issues like: data transmission set-up, status monitoring systems, data quality control, near-surface geological structure beneath stations and related site effects etc. Special attention was paid to verification of correct orientation of the sensors. The obtained data set will be modelled using several seismic interpretation methods, including analysis of seismic anisotropy parameters, with the objective of extending knowledge about the lithospheric and sub-lithospheric structure and the tectonic evolution of the study area.
- 1 July 2021
- Published by Copernicus GmbH
- p. 1-28
Open AccessReply on RC1
The paper presents information about the seismic experiment AniMaLS which aims to provide a new insight into the crustal and upper mantle structure beneath the Polish Sudetes (NE margin of the Variscan orogen). The seismic array composed of 23 temporary broadband stations was operating continuously for ~2 years (October 2017 and October 2019). The dataset was complemented by records from 8 permanent stations located in the study area and in the vicinity. The stations were deployed with inter-station spacing of approximately 25–30 km. As a result, good quality recordings of local, regional and teleseismic events were obtained. We describe the aims and motivation of the project, the stations deployment procedure, as well as the characteristics of the temporary seismic array and of the permanent stations. Furthermore, this paper includes a description of important issues like: data transmission set-up, status monitoring systems, data quality control, near-surface geological structure beneath stations and related site effects etc. Special attention was paid to verification of correct orientation of the sensors. The obtained data set will be modelled using several seismic interpretation methods, including analysis of seismic anisotropy parameters, with the objective of extending knowledge about the lithospheric and sub-lithospheric structure and the tectonic evolution of the study area.
- Open Access
- 1 July 2021
- Published by Copernicus GmbH
- p. 1-28
Reply on RC2
The paper presents information about the seismic experiment AniMaLS which aims to provide a new insight into the crustal and upper mantle structure beneath the Polish Sudetes (NE margin of the Variscan orogen). The seismic array composed of 23 temporary broadband stations was operating continuously for ~2 years (October 2017 and October 2019). The dataset was complemented by records from 8 permanent stations located in the study area and in the vicinity. The stations were deployed with inter-station spacing of approximately 25–30 km. As a result, good quality recordings of local, regional and teleseismic events were obtained. We describe the aims and motivation of the project, the stations deployment procedure, as well as the characteristics of the temporary seismic array and of the permanent stations. Furthermore, this paper includes a description of important issues like: data transmission set-up, status monitoring systems, data quality control, near-surface geological structure beneath stations and related site effects etc. Special attention was paid to verification of correct orientation of the sensors. The obtained data set will be modelled using several seismic interpretation methods, including analysis of seismic anisotropy parameters, with the objective of extending knowledge about the lithospheric and sub-lithospheric structure and the tectonic evolution of the study area.
- 1 July 2021
- Published by Copernicus GmbH
- p. 1-28
Open AccessReply on RC2
The paper presents information about the seismic experiment AniMaLS which aims to provide a new insight into the crustal and upper mantle structure beneath the Polish Sudetes (NE margin of the Variscan orogen). The seismic array composed of 23 temporary broadband stations was operating continuously for ~2 years (October 2017 and October 2019). The dataset was complemented by records from 8 permanent stations located in the study area and in the vicinity. The stations were deployed with inter-station spacing of approximately 25–30 km. As a result, good quality recordings of local, regional and teleseismic events were obtained. We describe the aims and motivation of the project, the stations deployment procedure, as well as the characteristics of the temporary seismic array and of the permanent stations. Furthermore, this paper includes a description of important issues like: data transmission set-up, status monitoring systems, data quality control, near-surface geological structure beneath stations and related site effects etc. Special attention was paid to verification of correct orientation of the sensors. The obtained data set will be modelled using several seismic interpretation methods, including analysis of seismic anisotropy parameters, with the objective of extending knowledge about the lithospheric and sub-lithospheric structure and the tectonic evolution of the study area.