Anna S. Seroglazova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Anna S. Seroglazova has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Vadim Igorevich Popkov
Ioffe Institute, St. Petersburg, Russia
7 shared publications Valentin G. Semenov
Institute of Chemistry, Saint Petersburg State University, Saint-Petersburg 198504, Russian Federation
3 shared publicationsArtem A. Lobinsky
Ioffe Institute, Saint Petersburg 194021, Russian Federation
2 shared publications- Maria Igorevna Chebanenko
Ioffe Institute
2 shared publications Vitaly V. Panchyk
Institute of Chemistry, Saint Petersburg State University, Saint-Petersburg 198504, Russian Federation
2 shared publications- Albina A. Valeeva
Institute of Solid State Chemistry, Ural Branch of the Russian Academy of Sciences, 620990 Ekaterinburg, Russia
1 shared publication
Latest Publications
- Open Access
- 8 February 2024
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 48 (8) , 3767
Correction: Novel electrode material based on coral-like cerium orthoferrite (CeFeO3) for efficient alkaline water splitting
Correction for ‘Novel electrode material based on coral-like cerium orthoferrite (CeFeO3) for efficient alkaline water splitting’ by Anna S. Seroglazova et al., New J. Chem., 2023, 47, 20257–20261, https://doi.org/10.1039/D3NJ01898A.
- 8 February 2024
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 48 (8) , 3767
Open AccessCorrection: Novel electrode material based on coral-like cerium orthoferrite (CeFeO3) for efficient alkaline water splitting
Correction for ‘Novel electrode material based on coral-like cerium orthoferrite (CeFeO3) for efficient alkaline water splitting’ by Anna S. Seroglazova et al., New J. Chem., 2023, 47, 20257–20261, https://doi.org/10.1039/D3NJ01898A.
- 28 November 2023
- Published by Elsevier in Ceramics International
- Vol. 50 (4) , 6099-6107
Facile solution combustion synthesis of mesoporous HfTiO4 as novel photoanode material with enhanced visible-light response
- 28 November 2023
- Published by Elsevier in Ceramics International
- Vol. 50 (4) , 6099-6107
Facile solution combustion synthesis of mesoporous HfTiO4 as novel photoanode material with enhanced visible-light response
- 30 October 2023
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 47 (44) , 20257-20261
Novel electrode material based on coral-like cerium orthoferrite (CeFeO 3 ) for efficient alkaline water splitting
Schematic representation of oxygen and hydrogen generation in alkaline water splitting using electrode material based on coral-like cerium orthoferrite (CeFeO 3 ) obtained via solution combustion.
- 30 October 2023
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 47 (44) , 20257-20261
Novel electrode material based on coral-like cerium orthoferrite (CeFeO 3 ) for efficient alkaline water splitting
Schematic representation of oxygen and hydrogen generation in alkaline water splitting using electrode material based on coral-like cerium orthoferrite (CeFeO 3 ) obtained via solution combustion.
- 17 January 2023
- Published by Elsevier in Ceramics International
- Vol. 49 (10) , 15468-15479
Solution combustion synthesis of novel PrFeO3/CeO2 nanocomposite with enhanced photo-Fenton activity under visible light
- 17 January 2023
- Published by Elsevier in Ceramics International
- Vol. 49 (10) , 15468-15479
Solution combustion synthesis of novel PrFeO3/CeO2 nanocomposite with enhanced photo-Fenton activity under visible light
- 28 December 2022
- Published by ITMO University in Nanosystems: Physics, Chemistry, Mathematics
- Vol. 13 (6) , 649-654
Synthesis of highly active and visible-light-driven PrFeO3 photocatalyst using solution combustion approach and succinic acid as fuel
- 28 December 2022
- Published by ITMO University in Nanosystems: Physics, Chemistry, Mathematics
- Vol. 13 (6) , 649-654
Synthesis of highly active and visible-light-driven PrFeO3 photocatalyst using solution combustion approach and succinic acid as fuel
- Open Access
Synthesis, Characterization and Photocatalytic Activity of Spherulite-like r-TiO2 in Hydrogen Evolution Reaction and Methyl Violet Photodegradation
Synthesis and characterization of spherulite-like nanocrystalline titania with rutile structure (r-TiO2) are described herein. The r-TiO2 particles were synthesized via the convenient and low-cost hydrothermal treatment of TiO(C6H6O7) titanyl citrate. The r-TiO2 spherulites are micron-sized agglomerates of rod-shaped nanocrystals with characteristic sizes of 7(±2) × 43(±10) nm, oriented along (101) crystallographic direction, and separated by micropores, as revealed by SEM and TEM. PXRD and Raman spectroscopy confirmed the nanocrystalline nature of r-TiO2 crystallites. BET analysis showed a high specific surface area of 102.6 m2/g and a pore volume of 6.22 mm3/g. Photocatalytic performances of the r-TiO2 spherulites were investigated for the processes of methyl violet (MV) degradation in water and hydrogen evolution reaction (HER) in aqueous solutions of ethanol. The (MV) degradation kinetics was found to be first-order and the degradation rate coefficient is 2.38 × 10−2 min−1. The HER was performed using pure r-TiO2 spherulites and nanocomposite r-TiO2 spherulites with platinum deposited on the surface (r-TiO2/Pt). It was discovered that the r-TiO2/Pt nanocomposite has a 15-fold higher hydrogen evolution rate than pure r-TiO2; their rates are 161 and 11 nmol/min, respectively. Thus, the facile synthesis route and the high photocatalytic performances of the obtained nanomaterials make them promising for commercial use in such photocatalytic processes as organic contamination degradation and hydrogen evolution.
Open AccessSynthesis, Characterization and Photocatalytic Activity of Spherulite-like r-TiO2 in Hydrogen Evolution Reaction and Methyl Violet Photodegradation
Synthesis and characterization of spherulite-like nanocrystalline titania with rutile structure (r-TiO2) are described herein. The r-TiO2 particles were synthesized via the convenient and low-cost hydrothermal treatment of TiO(C6H6O7) titanyl citrate. The r-TiO2 spherulites are micron-sized agglomerates of rod-shaped nanocrystals with characteristic sizes of 7(±2) × 43(±10) nm, oriented along (101) crystallographic direction, and separated by micropores, as revealed by SEM and TEM. PXRD and Raman spectroscopy confirmed the nanocrystalline nature of r-TiO2 crystallites. BET analysis showed a high specific surface area of 102.6 m2/g and a pore volume of 6.22 mm3/g. Photocatalytic performances of the r-TiO2 spherulites were investigated for the processes of methyl violet (MV) degradation in water and hydrogen evolution reaction (HER) in aqueous solutions of ethanol. The (MV) degradation kinetics was found to be first-order and the degradation rate coefficient is 2.38 × 10−2 min−1. The HER was performed using pure r-TiO2 spherulites and nanocomposite r-TiO2 spherulites with platinum deposited on the surface (r-TiO2/Pt). It was discovered that the r-TiO2/Pt nanocomposite has a 15-fold higher hydrogen evolution rate than pure r-TiO2; their rates are 161 and 11 nmol/min, respectively. Thus, the facile synthesis route and the high photocatalytic performances of the obtained nanomaterials make them promising for commercial use in such photocatalytic processes as organic contamination degradation and hydrogen evolution.
- 1 February 2022
- Published by Elsevier in Advanced Powder Technology
- Vol. 33 (2)
Ox/Red-controllable combustion synthesis of foam-like PrFeO3 nanopowders for effective photo-Fenton degradation of methyl violet
- 1 February 2022
- Published by Elsevier in Advanced Powder Technology
- Vol. 33 (2)
Ox/Red-controllable combustion synthesis of foam-like PrFeO3 nanopowders for effective photo-Fenton degradation of methyl violet
- Open Access
- 24 November 2021
- Published by Voronezh State University in Kondensirovannye sredy i mezhfaznye granitsy = Condensed Matter and Interphases
- Vol. 23 (4) , 548-560
Synthesis, structure, and photo-Fenton activity of PrFeO3-TiO2 mesoporous nanocomposites
Porous nanocomposites based on PrFeO3-TiO2 were synthesized using the glycine-nitrate combustion method with different values of mass content of TiO2 (0–7.5 %) and subsequent heat treatment in air. The results of X-ray phase analysis and Raman spectroscopy confirmed the presence of ultradispersed TiO2, structurally close to that of anatase. The morphology, specific surface area, and porous structure of the obtained powders were characterized by scanning electron microscopy and adsorption-structural analysis, the results of which showed that the samples had a foam-like mesoporous structure.The specific surface area and the average pore size were in the ranges of 7.6–17.8 m2/g and 7.2–15.2 nm, respectively, and varied depending on the TiO2 content. The optical properties of the nanocomposites were studied by UV-visible diffuse reflection spectroscopy, the energy of the band gap was calculated as 2.11–2.26 eV. The photocatalytic activity of PrFeO3‑TiO2 nanocomposites was investigated in the process of photo-Fenton-like degradation of methyl violet under the action of visible light. It was shown that the maximum reaction rate constant was 0.095 min-1, which is ten times higher than the value for the known orthoferrite-based analogs. The obtained photocatalysts were also characterized by their high cyclic stability. Based on the studies carried out, the obtained porous PrFeO3-TiO2 nanocomposites can be considered to be apromising basis for photocatalysts applied in advanced oxidative processes of aqueous media purification from organic pollutants.
- 24 November 2021
- Published by Voronezh State University in Kondensirovannye sredy i mezhfaznye granitsy = Condensed Matter and Interphases
- Vol. 23 (4) , 548-560
Open AccessSynthesis, structure, and photo-Fenton activity of PrFeO3-TiO2 mesoporous nanocomposites
Porous nanocomposites based on PrFeO3-TiO2 were synthesized using the glycine-nitrate combustion method with different values of mass content of TiO2 (0–7.5 %) and subsequent heat treatment in air. The results of X-ray phase analysis and Raman spectroscopy confirmed the presence of ultradispersed TiO2, structurally close to that of anatase. The morphology, specific surface area, and porous structure of the obtained powders were characterized by scanning electron microscopy and adsorption-structural analysis, the results of which showed that the samples had a foam-like mesoporous structure.The specific surface area and the average pore size were in the ranges of 7.6–17.8 m2/g and 7.2–15.2 nm, respectively, and varied depending on the TiO2 content. The optical properties of the nanocomposites were studied by UV-visible diffuse reflection spectroscopy, the energy of the band gap was calculated as 2.11–2.26 eV. The photocatalytic activity of PrFeO3‑TiO2 nanocomposites was investigated in the process of photo-Fenton-like degradation of methyl violet under the action of visible light. It was shown that the maximum reaction rate constant was 0.095 min-1, which is ten times higher than the value for the known orthoferrite-based analogs. The obtained photocatalysts were also characterized by their high cyclic stability. Based on the studies carried out, the obtained porous PrFeO3-TiO2 nanocomposites can be considered to be apromising basis for photocatalysts applied in advanced oxidative processes of aqueous media purification from organic pollutants.