Mohammad Kheirkhah Gilde
Research Subjects
Mohammad Kheirkhah Gilde has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
Ali Imanpour
2 shared publicationsNader Yoosef-Ghodsi
2 shared publicationsSamer Adeeb
2 shared publications- Amirhossein Iranmehr1 shared publication
Amr Mohamadien
1 shared publicationEnayat Najari
1 shared publication
Latest Publications
- Open Access
- 19 September 2026
- Published by Elsevier in SSRN Electronic Journal
Tensile Strain Capacity of Girth-Welded API 5L X42 Pipelines: Experimental Validation and Semi-Empirical Model Development
Vintage pipelines subjected to geohazard-induced ground movements require strain-based assessment methods that account for weld defects and material properties. This study develops and validates a semiempirical tensile strain capacity (TSC) model for NPS 6, API 5L X42 pipelines, taking into consideration the existence of girth weld flaws. Three full-scale pipe specimens containing machined flaws at critical weld locations were tested under combined internal pressure (7230 kPa, 53% SMYS) and four-point bending. Specimen X1 (50% wall thickness flaw in a defect zone) exhibited brittle fracture at TSC of about 0.1162% (approximately 0.12%), while specimen X3 (25% flaw in defect-free weld zone) showed ductile tearing with TSC of approximately 0.36%. Fractography revealed that weld misalignment (0.56-1.0 mm) and undercut features significantly influenced crack propagation paths.,An extended finite element method (XFEM) model, calibrated using single-edge notched tension (SENT) test data, accurately reproduced the experimental failure modes and TSC values. A parametric study of 64 XFEM simulations varying flaw depth (0.25t - 0.75t), flaw length (4t - 10t), and internal pressure (0.4 Py - 0.7 Py ) was used to develop a semi-empirical TSC model, termed TSCCM , based on circumferential material properties. The model showed strong predictive capability (R² = 0.9985) and provided better agreement with experimental data than existing industry models (ExxonMobil, PRCI) when applied to small-diameter, thin-walled vintage pipelines. The TSCCM model offers a practical engineering tool for integrity assessment of the vintage X42 pipeline under investigation, operating under ground-movement hazards. The paper provides a methodological approach to generate similar tensile strain capacity models for any vintage pipeline using a combination of full-scale and small-scale experiments, aided by the extended finite element analysis method.
- 19 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessTensile Strain Capacity of Girth-Welded API 5L X42 Pipelines: Experimental Validation and Semi-Empirical Model Development
Vintage pipelines subjected to geohazard-induced ground movements require strain-based assessment methods that account for weld defects and material properties. This study develops and validates a semiempirical tensile strain capacity (TSC) model for NPS 6, API 5L X42 pipelines, taking into consideration the existence of girth weld flaws. Three full-scale pipe specimens containing machined flaws at critical weld locations were tested under combined internal pressure (7230 kPa, 53% SMYS) and four-point bending. Specimen X1 (50% wall thickness flaw in a defect zone) exhibited brittle fracture at TSC of about 0.1162% (approximately 0.12%), while specimen X3 (25% flaw in defect-free weld zone) showed ductile tearing with TSC of approximately 0.36%. Fractography revealed that weld misalignment (0.56-1.0 mm) and undercut features significantly influenced crack propagation paths.,An extended finite element method (XFEM) model, calibrated using single-edge notched tension (SENT) test data, accurately reproduced the experimental failure modes and TSC values. A parametric study of 64 XFEM simulations varying flaw depth (0.25t - 0.75t), flaw length (4t - 10t), and internal pressure (0.4 Py - 0.7 Py ) was used to develop a semi-empirical TSC model, termed TSCCM , based on circumferential material properties. The model showed strong predictive capability (R² = 0.9985) and provided better agreement with experimental data than existing industry models (ExxonMobil, PRCI) when applied to small-diameter, thin-walled vintage pipelines. The TSCCM model offers a practical engineering tool for integrity assessment of the vintage X42 pipeline under investigation, operating under ground-movement hazards. The paper provides a methodological approach to generate similar tensile strain capacity models for any vintage pipeline using a combination of full-scale and small-scale experiments, aided by the extended finite element analysis method.
- Open Access
- 9 September 2026
- Published by Elsevier in Theoretical and Applied Fracture Mechanics
- Vol. 148
Constraint-dependent CTOD resistance and triaxiality-based damage initiation relationships of API X52 pipeline steel using XFEM analysis of SENT, SENB, and CT specimens
- 9 September 2026
- Published by Elsevier in Theoretical and Applied Fracture Mechanics
- Vol. 148
Open AccessConstraint-dependent CTOD resistance and triaxiality-based damage initiation relationships of API X52 pipeline steel using XFEM analysis of SENT, SENB, and CT specimens