Tianqi Zhu
Tianqi Zhu has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
Hongmei Li
2 shared publicationsMakoto Kobashi
2 shared publicationsMasataka Yoshino
2 shared publicationsNaoki Takata
2 shared publications- Shuo Yin
Department of Mechanical, Manufacturing and Biomedical Engineering, Trinity College Dublin, The University of Dublin, Dublin, Ireland
2 shared publications Anton Zubayer
1 shared publication
Latest Publications
- Open Access
- 24 July 2026
- Published by Elsevier in Scripta Materialia
- Vol. 284
Laser ablation particle acceleration and observation (LAPAO) system reveals the metal–ceramic adhesion mechanism under supersonic impacts
- 24 July 2026
- Published by Elsevier in Scripta Materialia
- Vol. 284
Open AccessLaser ablation particle acceleration and observation (LAPAO) system reveals the metal–ceramic adhesion mechanism under supersonic impacts
- Open Access
- 27 October 2025
- Published by Elsevier in Acta Materialia
- Vol. 302
Growth mechanisms and mechanical response of 3D superstructured cubic and hexagonal Hf1-xAlxN thin films
- 27 October 2025
- Published by Elsevier in Acta Materialia
- Vol. 302
Open AccessGrowth mechanisms and mechanical response of 3D superstructured cubic and hexagonal Hf1-xAlxN thin films
- Open Access
- 19 July 2025
- Published by Elsevier in Materials & Design
- Vol. 257
Bi-modal structured cold spray copper deposits enabling high strength and ductility
- 19 July 2025
- Published by Elsevier in Materials & Design
- Vol. 257
Open AccessBi-modal structured cold spray copper deposits enabling high strength and ductility
- 25 September 2022
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 857
Effect of solute Ni on thermal activation process of plastic deformation in Fe–18Cr single-crystal micropillars
- 25 September 2022
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 857
Effect of solute Ni on thermal activation process of plastic deformation in Fe–18Cr single-crystal micropillars
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Effect of Solute Ni on the Thermal Activation During the Plastic Deformation of Fe-18cr Single-Crystal Micropillars
The aim of the present study was to identify the effect of solute Ni element on the plastic deformation and its thermal activation process of 18Cr ferritic stainless steels. Single-crystal micropillars with different diameters of approximately 2 and 5 μm were fabricated on the surface of Fe-18%Cr-Ni alloy sheets containing different contents of Ni (0–2 mass%). Compression tests were performed on the micropillars at different initial strain rates to investigate the strain rate sensitivity ( m ) of stress for the slip initiation and the specimen-size dependence of the m value. In micropillars with a small diameter of 2 μm, the Fe-18Cr binary alloy specimen exhibited a relatively higher strain-rate sensitivity of initial slip stress ( m = 0.12), whereas m was reduced to 0.01 by adding 2% Ni. The same trend was observed in micropillars with a larger size of approximately 5 μm. The experimental results were utilized to evaluate the activation volume of plastic deformation. The activation volumes of the Fe-18%Cr alloy and alloy containing 1% Ni followed the specimen-size dependence trend of activation volume in bcc metals; however, the alloy containing 2% Ni exhibited larger activation volumes, suggesting a different thermal activation process presumably due to the significant interaction that occurred between dislocations and solute Ni atoms in bcc solid-solutions.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessEffect of Solute Ni on the Thermal Activation During the Plastic Deformation of Fe-18cr Single-Crystal Micropillars
The aim of the present study was to identify the effect of solute Ni element on the plastic deformation and its thermal activation process of 18Cr ferritic stainless steels. Single-crystal micropillars with different diameters of approximately 2 and 5 μm were fabricated on the surface of Fe-18%Cr-Ni alloy sheets containing different contents of Ni (0–2 mass%). Compression tests were performed on the micropillars at different initial strain rates to investigate the strain rate sensitivity ( m ) of stress for the slip initiation and the specimen-size dependence of the m value. In micropillars with a small diameter of 2 μm, the Fe-18Cr binary alloy specimen exhibited a relatively higher strain-rate sensitivity of initial slip stress ( m = 0.12), whereas m was reduced to 0.01 by adding 2% Ni. The same trend was observed in micropillars with a larger size of approximately 5 μm. The experimental results were utilized to evaluate the activation volume of plastic deformation. The activation volumes of the Fe-18%Cr alloy and alloy containing 1% Ni followed the specimen-size dependence trend of activation volume in bcc metals; however, the alloy containing 2% Ni exhibited larger activation volumes, suggesting a different thermal activation process presumably due to the significant interaction that occurred between dislocations and solute Ni atoms in bcc solid-solutions.