Lei Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lei Wang has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
Qiuyu Zhu
Engineering Research Center for Eco-Dyeing and Finishing of Textiles, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, China
9 shared publicationsGuangyuan Xie
Engineering Research Center for Eco-Dyeing and Finishing of Textiles, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, China
6 shared publicationsZhicheng Yu
Engineering Research Center for Eco-Dyeing and Finishing of Textiles, Zhejiang Sci-Tech University, Hangzhou, China
6 shared publicationsHanchang Hu
State Key Laboratory of Silicon Materials & School of Materials Science and Engineering, Zhejiang University, Hangzhou 310027, China
5 shared publicationsBeibei Xie
Engineering Research Center for Eco‐Dyeing and Finishing of Textiles Zhejiang Sci‐Tech University Hangzhou Zhejiang China
4 shared publicationsYu Du
Engineering Research Center for Eco-Dyeing and Finishing of Textiles, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, China
4 shared publications
Latest Publications
- Open Access
- 29 July 2026
- Published by Wiley in Advanced Science
- Vol. 13 (57) , e76684
Regulating Droplet Dynamics via Wormlike Micelle Networks: From Splash Suppression to Precise Confined Spreading
The high‐speed impact of droplets is fundamental to frontier applications ranging from high‐resolution inkjet printing to precision agriculture. However, simultaneously suppressing stochastic splashing and achieving controllable, uniform spreading on hydrophilic surfaces remains a formidable challenge. Herein, we report a strategy to modulate droplet dynamics, which triggers a structural transition in anionic surfactant (SDS) aggregates via quaternary ammonium cationic induction (CT 1 , CT 4 ). This transition yields a sophisticated internal wormlike micelle (WLM) network that facilitates splash‐free, spatially confined deposition. As a proof of concept, we demonstrate the dual‐regulatory role of the WLM network during high‐speed impact on cotton fabrics. Specifically, the synergistic interaction between CT 4 ‐SDS aggregates and the ionic bonding with the cellulose backbone effectively inhibits excessive spreading during the initial wetting phase. Furthermore, the entanglement of the WLM network with the hierarchical micro/nano‐structures of cellulose fibers generates a powerful interfacial mechanical pinning effect. This effect immobilizes the three‐phase contact line and constructs a spatial barrier at the spreading front. As a result, a stabilized liquid film and uniform circular deposition are ensured. Overall, this study provides a novel mechanistic pathway for steering droplet impact kinetics and offers critical insights into the design of complex fluids for high‐performance functional coating and deposition.
- 29 July 2026
- Published by Wiley in Advanced Science
- Vol. 13 (57) , e76684
Open AccessRegulating Droplet Dynamics via Wormlike Micelle Networks: From Splash Suppression to Precise Confined Spreading
The high‐speed impact of droplets is fundamental to frontier applications ranging from high‐resolution inkjet printing to precision agriculture. However, simultaneously suppressing stochastic splashing and achieving controllable, uniform spreading on hydrophilic surfaces remains a formidable challenge. Herein, we report a strategy to modulate droplet dynamics, which triggers a structural transition in anionic surfactant (SDS) aggregates via quaternary ammonium cationic induction (CT 1 , CT 4 ). This transition yields a sophisticated internal wormlike micelle (WLM) network that facilitates splash‐free, spatially confined deposition. As a proof of concept, we demonstrate the dual‐regulatory role of the WLM network during high‐speed impact on cotton fabrics. Specifically, the synergistic interaction between CT 4 ‐SDS aggregates and the ionic bonding with the cellulose backbone effectively inhibits excessive spreading during the initial wetting phase. Furthermore, the entanglement of the WLM network with the hierarchical micro/nano‐structures of cellulose fibers generates a powerful interfacial mechanical pinning effect. This effect immobilizes the three‐phase contact line and constructs a spatial barrier at the spreading front. As a result, a stabilized liquid film and uniform circular deposition are ensured. Overall, this study provides a novel mechanistic pathway for steering droplet impact kinetics and offers critical insights into the design of complex fluids for high‐performance functional coating and deposition.
- 17 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (6) , 4573-4586
Controlling the Soft-Core–Hard-Shell Gradient Copolymer-Encapsulated Structure for Smooth Pigment-Based Inkjet Printing
- 17 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (6) , 4573-4586
Controlling the Soft-Core–Hard-Shell Gradient Copolymer-Encapsulated Structure for Smooth Pigment-Based Inkjet Printing
- 24 March 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 308, 142440
Reassembly mechanism of keratin structures for the valorization of keratinous wastes
- 24 March 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 308, 142440
Reassembly mechanism of keratin structures for the valorization of keratinous wastes
- 21 March 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 308 (Pt 1) , 142387
Salt-free clean dyeing of cotton fabrics by reactive dye/cationic nanoparticle to obtain dark-coloured fabrics
- 21 March 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 308 (Pt 1) , 142387
Salt-free clean dyeing of cotton fabrics by reactive dye/cationic nanoparticle to obtain dark-coloured fabrics
- 27 September 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 281 (Pt 1) , 135898
Regulating the surface charge and reactivity of cellulose through quaternized modification to achieve salt-free reactive dyeing process
- 27 September 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 281 (Pt 1) , 135898
Regulating the surface charge and reactivity of cellulose through quaternized modification to achieve salt-free reactive dyeing process
- 17 June 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (26) , 13636-13647
Regulating the Morphology Modification To Prepare the High Charge Separation Efficiency and Visible Light Responsive Dual-Type-II B-CN/H-TiO2/BS-CN Heterojunction for Wastewater Treatment
For the conventional type-II heterojunction photocatalyst, their photocatalytic activity is affected by the limited separation efficiency of electron-hole pairs, exquisitely designed heterojunction photocatalysts are highly prospective materials for inducing charge transfer efficiently. Typically, enhancing the separation efficiency of electron-hole pairs in photocatalysts has been a formidable challenge. Here, the hollow mesoporous TiO2 (H-TiO2), the bulk g-C3N4 (B-CN), and g-C3N4 with bamboo shape (BS-CN) are prepared by simple processes. Among them, it is surprising to find that the band structure of g-C3N4 can be regulated and controlled by adjusting its structure. The B-CN/H-TiO2/BS-CN (CNTOCN) dual-type-II heterojunction photocatalyst and B-CN/H-TiO2 (CNTO) type-II heterojunction photocatalyst are designed to improve the separation efficiency of electron-hole pairs. The superiority of CNTOCN dual-type-II heterojunction photocatalyst is demonstrated by the photocatalysis experiment, the band structure analysis, and the photoelectric characterization. The results show that CNTOCN (0.8428 h-1) has much higher photocatalytic activity than H-TiO2 (0.0812 h-1), B-CN (0.3569 h-1), and CNTO (0.5934 h-1). The improvement of photocatalytic activity is ascribed to the establishment of the dual-type-II heterojunction charge transfer mechanism. This work presents an approach to designing efficient dual-type-II heterojunction photocatalysts for the sustainable conversion of solar energy to photodegrade dyes in dyeing wastewater.
- 17 June 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (26) , 13636-13647
Regulating the Morphology Modification To Prepare the High Charge Separation Efficiency and Visible Light Responsive Dual-Type-II B-CN/H-TiO2/BS-CN Heterojunction for Wastewater Treatment
For the conventional type-II heterojunction photocatalyst, their photocatalytic activity is affected by the limited separation efficiency of electron-hole pairs, exquisitely designed heterojunction photocatalysts are highly prospective materials for inducing charge transfer efficiently. Typically, enhancing the separation efficiency of electron-hole pairs in photocatalysts has been a formidable challenge. Here, the hollow mesoporous TiO2 (H-TiO2), the bulk g-C3N4 (B-CN), and g-C3N4 with bamboo shape (BS-CN) are prepared by simple processes. Among them, it is surprising to find that the band structure of g-C3N4 can be regulated and controlled by adjusting its structure. The B-CN/H-TiO2/BS-CN (CNTOCN) dual-type-II heterojunction photocatalyst and B-CN/H-TiO2 (CNTO) type-II heterojunction photocatalyst are designed to improve the separation efficiency of electron-hole pairs. The superiority of CNTOCN dual-type-II heterojunction photocatalyst is demonstrated by the photocatalysis experiment, the band structure analysis, and the photoelectric characterization. The results show that CNTOCN (0.8428 h-1) has much higher photocatalytic activity than H-TiO2 (0.0812 h-1), B-CN (0.3569 h-1), and CNTO (0.5934 h-1). The improvement of photocatalytic activity is ascribed to the establishment of the dual-type-II heterojunction charge transfer mechanism. This work presents an approach to designing efficient dual-type-II heterojunction photocatalysts for the sustainable conversion of solar energy to photodegrade dyes in dyeing wastewater.
- 24 January 2024
- Published by Springer Nature in Cellulose
- Vol. 31 (4) , 2583-2601
Eco-friendly and sustainable application of gardenia yellow extraction as natural dye source for dyeing and bio-functional finishing of cotton fabric
- 24 January 2024
- Published by Springer Nature in Cellulose
- Vol. 31 (4) , 2583-2601
Eco-friendly and sustainable application of gardenia yellow extraction as natural dye source for dyeing and bio-functional finishing of cotton fabric
- 3 November 2023
- Published by Elsevier in Applied Surface Science
- Vol. 644, 158764
Quaternized hollow TiO2-enhanced the dye adsorption capacity and photogenerated carrier separation for efficient reactive dye removal
- 3 November 2023
- Published by Elsevier in Applied Surface Science
- Vol. 644, 158764
Quaternized hollow TiO2-enhanced the dye adsorption capacity and photogenerated carrier separation for efficient reactive dye removal
- Open Access
- 19 May 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (22) , 20116-20124
Surface-Modified TiO2@SiO2 Nanocomposites for Enhanced Dispersibility and Optical Performance to Apply in the Printing Process as a Pigment
The grafted modification TiO2@SiO2 composite was fabricated by a liquid-phase deposition method with Na2SiO3 and a grafting reaction with a silane coupling agent. First, the TiO2@SiO2 composite was prepared, and the effect of deposition rate and silica content on the morphology, particle size, dispersibility, and pigmentary property of TiO2@SiO2 composites was investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), and ζ-potential. The islandlike TiO2@SiO2 composite had a good particle size and printing performance compared with the dense TiO2@SiO2 composite. The presence of Si was confirmed by EDX elemental analysis and XPS, and a peak at 980 cm-1 belonging to Si-O was observed in the FTIR spectrum, confirming the presence of SiO2 anchored at TiO2 surfaces via Si-O-Ti bonds. Then, the islandlike TiO2@SiO2 composite was modified by grafting with a silane coupling agent. The effect of the silane coupling agent on the hydrophobicity and dispersibility was investigated. The peaks at 2919 and 2846 cm-1 belong to CH2 in the FTIR spectrum, and Si-C in the XPS confirmed the grafting of silane coupling agent to the TiO2@SiO2 composite. The grafted modification of the islandlike TiO2@SiO2 composite using 3-triethoxysilylpropylamine endowed it with weather durability, dispersibility, and good printing performance.
- 19 May 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (22) , 20116-20124
Open AccessSurface-Modified TiO2@SiO2 Nanocomposites for Enhanced Dispersibility and Optical Performance to Apply in the Printing Process as a Pigment
The grafted modification TiO2@SiO2 composite was fabricated by a liquid-phase deposition method with Na2SiO3 and a grafting reaction with a silane coupling agent. First, the TiO2@SiO2 composite was prepared, and the effect of deposition rate and silica content on the morphology, particle size, dispersibility, and pigmentary property of TiO2@SiO2 composites was investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), and ζ-potential. The islandlike TiO2@SiO2 composite had a good particle size and printing performance compared with the dense TiO2@SiO2 composite. The presence of Si was confirmed by EDX elemental analysis and XPS, and a peak at 980 cm-1 belonging to Si-O was observed in the FTIR spectrum, confirming the presence of SiO2 anchored at TiO2 surfaces via Si-O-Ti bonds. Then, the islandlike TiO2@SiO2 composite was modified by grafting with a silane coupling agent. The effect of the silane coupling agent on the hydrophobicity and dispersibility was investigated. The peaks at 2919 and 2846 cm-1 belong to CH2 in the FTIR spectrum, and Si-C in the XPS confirmed the grafting of silane coupling agent to the TiO2@SiO2 composite. The grafted modification of the islandlike TiO2@SiO2 composite using 3-triethoxysilylpropylamine endowed it with weather durability, dispersibility, and good printing performance.