MBMalte Jonas Marius Julian Becher

Malte Jonas Marius Julian Becher

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Malte Jonas Marius Julian Becher has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Phase Engineering of Plasma‐Enhanced Atomic Layer Deposited Molybdenum Disulfide Using High Accuracy Direct Writing With Focused Li + and Ga + Ion Beams and Ultrashort Pulse Laser

    by Marvin Krüner, Achim Nadzeyka, Malte Jonas Marius Julian Becher, Zhongquan Liao, Detlef Rogalla, André Clausner, Andreas Ostendorf, Michael Kahl, Claudia Bock

    Two‐dimensional (2D) transition metal dichalcogenides (TMDCs), such as molybdenum disulfide (), have significant potential as materials for the next generation of flexible electronics. They offer advantages over conventional semiconductors, particularly due to their tunable crystal phases. However, precise control of phase transformation in 2D layers deposited using low‐temperature processes in a bottom‐up approach for future electronics has not yet been mastered, which limits their integration into scalable device technology. This study demonstrates the control of the phase composition of plasma enhanced atomic layer deposited (PEALD) films by direct writing with focused and ion beams, and retransformation into the 2H phase by ultrashort pulse laser processing. The ion beam‐treated films exhibit excellent long‐term stability and are therefore suitable for industrial processes.

  • Open Access

    Acoustically-driven femtosecond laser ablation of atomically thin molybdenum disulfide

    by Malte J. M. J. Becher, Anton Saetchnikov, Leander Vogel, Ralf Nett, Yannis Laplace, Tingwen Guo, Pavel Varlamov, Charlie Massé, Claudia Bock, Andreas Ostendorf, et al.


  • Open Access

    Pulse Duration Dependent Formation of Laser‐Induced Periodic Surface Structures in Atomic Layer Deposited MoS2

    by Malte J. M. J. Becher, Jonas B. Ullrich, Julia Jagosz, Aleksander Kostka, Claudia Bock, Andreas Ostendorf, Evgeny L. Gurevich

    In this paper, the formation of laser‐induced periodic surface structures (LIPSS) on atomic‐layer deposited MoS2 layers are studied experimentally. The process parameters (laser fluence and the pulse overlap) corresponding to formation of low‐ and high‐spatial frequency LIPSS as well as ablation and modification of the layers are identified for different pulse durations in the range from 0.2 to 10 ps. The role of the temperature accumulation is evaluated by changing the repetition rate from 0.2 to 2 MHz. The negative accumulation effect, i.e., the ablation of the layers becomes more difficult at higher laser pulse overlaps, is also observed. A simple model explaining the transition between different types of the LIPSS and the decrease of the ablation efficiency with the pulse overlap is suggested.


  • Open Access

    Wafer‐Scale Demonstration of Polycrystalline MoS2 Growth on 200 mm Glass and SiO2/Si Substrates by Plasma‐Enhanced Atomic Layer Deposition

    by Julia Jagosz, Leander Willeke, Nils Gerke, Malte J. M. J. Becher, Paul Plate, Aleksander Kostka, Detlef Rogalla, Andreas Ostendorf, Claudia Bock

    2D materials like transition metal dichalcogenides (TMDCs) have been widely studied and are a gateway to modern technologies. While research today is mostly carried out on a laboratory scale, there is an intensive need for reliable processes on a wafer‐scale, starting with monolayer‐precise deposition of high‐quality films. In this work, a plasma‐enhanced atomic layer deposition (PEALD) process is developed on a 200 mm SiO2/Si substrate. The layers are investigated regarding crystallinity, composition, homogeneity, microstructure, topography, and electrical properties. The process is then applied on 200 mm alkali‐free glass wafers aiming toward flexible electronics and compatibility with Si processes. A complete coverage of the wafer with a satisfying uniformity is achieved on both substrates and direct polycrystalline growth of MoS2 films is verified on the entire wafer at a substrate temperature of T = 230 °C. On glass, the deposited MoS2 films exhibit a higher crystallinity and are more planar compared to the SiO2/Si substrate. Furthermore, application relevant few‐nanometer thick layers are investigated in detail. This low‐temperature process inspires optimism for future direct integration of 2D‐materials in an economical bottom‐up approach on a wide variety of substrates, thus paving the way for industrial mass production.


  • Open Access

    Ultrashort‐Pulsed‐Laser Annealing of Amorphous Atomic‐Layer‐Deposited MoS2 Films

    by Malte Jonas Marius Julian Becher, Julia Jagosz, Rahel-Manuela Neubieser, Jan-Lucas Wree, Anjana Devi, Marvin Michel, Claudia Bock, Evgeny L. Gurevich, Andreas Ostendorf

    To implement 2D molybdenum disulfide (MoS2) in the flexible electronic industry, large, uniform, and crystalline films on flexible substrates are needed. Thermal atomic layer deposition (ALD) generates large‐area uniform MoS2 films at low temperatures directly on temperature‐sensitive substrates. But if the grown films are amorphous, a high‐temperature posttreatment of the whole sample, which may cause thermal degradation of the substrate or other layers, needs to be avoided. In this article, the crystallization of amorphous MoS2 layers deposited by thermal ALD processed with picosecond laser pulses (λ = 532 nm), in a “cold” annealing process, is reported. The laser fluence range varies from = 8.73 mJ cm−2 to = 18.25 mJ cm−2 with scanning speeds from = 240 mm s−1 to = 2640 mm s−1. The crystallization and the influence of the processing parameters on the film morphology are analyzed in detail by Raman spectroscopy and scanning electron microscopy. Furthermore, a transition of amorphous MoS2 by laser annealing to self‐organized patterns is demonstrated and a possible process mechanism for the ultrashort‐pulsed (usp)‐laser annealing is discussed. Finally, the usp laser annealed films are compared to thermally and continuous‐wave‐laser‐annealed samples.


  • Open Access

    Formation of low- and high-spatial frequency laser-induced periodic surface structures (LIPSSs) in ALD-deposited MoS2

    by Malte J. M. J. Becher, Julia Jagosz, Claudia Bock, Andreas Ostendorf, Evgeny L. Gurevich

    The formation of laser-induced periodic surface structures (LIPSSs) on the atomic layer-deposited (ALD) molybdenum disulfide (MoS2) upon femtosecond laser processing is studied experimentally. Laser-processing parameters such as average laser power and the scan speed at which the formation of the periodic nanostructures takes place are identified. Optical and scanning electron microscopy are applied to identify the parameter regions for the different LIPSS formations and transitions between them. High- and low-spatial frequency LIPSS (HSFL and LSFL) with two distinct periods λLSFL ≈ 1.1 μm and λHSFL ≈ 83 nm can be observed. The HSFL are dominating at higher and the LSFL at lower laser average powers. Formation of LIPSS is found to inhibit laser ablation at lower scan speeds.


  • Open Access

    Ultrashort Pulse Laser Annealing of Amorphous Atomic Layer Deposited MoS$_2$ Films

    by Malte J. M. J. Becher, Julia Jagosz, Rahel-Manuela Neubieser, Jan-Lucas Wree, Anjana Devi, Marvin Michel, Claudia Bock, Evgeny L. Gurevich, Andreas Ostendorf

    Thin films of molybendum disulfide grown via thermal atomic layer deposition at low temperatures, suitable for temperature sensible substrates, can be amorphous. To avoid a high temperature post treatment of the whole sample, which can cause thermal degradation of the substrate or other layers, a ultrashort pulse (usp) laser-induced transformation to crystalline layers is one of the most promising routes. In this paper we report the crystallization of amorphous MoS$_2$ layers processed with ultrashort laser pulses. The amorphous MoS$_2$ films were deposited by atomic layer deposition (ALD) and exposed to picosecond laser pulses ($λ= 532$ nm). The crystallization and the influence of the processing parameters on the film morphology were analyzed in detail by Raman spectroscopy and scanning electron microscopy. Furthermore, a transition of amorphous MoS$_2$ by laser annealing to self-organized patterns is demonstrated and a possible process mechanism for the ultrashort pulse laser annealing is discussed. Finally, the usp laser annealed films were compared to thermally and continuous wave (cw) laser annealed samples.


  • Open Access

    Nucleation and growth studies of large-area deposited WS2 on flexible substrates

    by Thomas Berning, Malte Becher, Jan-Lucas Wree, Julia Jagosz, Aleksander Kostka, Andreas Ostendorf, Anjana Devi, Claudia Bock

    Transition metal dichalcogenides (TMDCs) such as tungsten disulfide (WS2) are studied for advanced electronic and optical devices because of their unique and versatile electrical, optical and mechanical properties. For the use of TMDC films in next-generation flexible electronics, large-area bottom-up synthesis on flexible substrates needs to be mastered, understood and controlled. In this study, we performed a detailed study on the nucleation and growth of WS2 layers deposited by metalorganic chemical vapor deposition (MOCVD) on crystalline van-der-Waals material muscovite mica as a model substrate and on the alkali-metal free flexible glass AF 32® eco. The deposition of the WS2 layers was performed using an all nitrogen-coordinated bis-imido-bis-amido tungsten based precursor in combination with elemental sulfur as the co-reactant. On both substrates, crystalline growth of WS2 at a moderate growth temperature of 600 °C was verified by Raman spectroscopy and X-ray diffraction (XRD). However, the growth mode and nucleation density differ significantly. On mica, an initially planar growth of WS2 triangular islands is observed, whereas untreated glass reveals an out-off plane growth. Detailed XRD and Raman analysis show tensile strain in the WS2 films on both substrates, indicating a strong interaction from CVD grown TMDC films with the underlying carrier material. In order to avoid such substrate-semiconductor interaction, a substrate pre-treatment is required. A plasma pre-treatment prior to the deposition leads to a planar growth even on amorphous glass substrates.