Zunwen Ke
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Zunwen Ke has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
Chengyong Wang
School of Electro-mechanical Engineering, Guangdong University of Technology, Guangzhou, China, 510006
1 shared publicationLijuan Zheng
School of Electro-mechanical Engineering, Guangdong University of Technology, Guangzhou, China, 510006
1 shared publicationQingshu Gu
Guangzhou Hasen Non-Woven Cloth Industry Co., LTD, Guangzhou, China, 510800
1 shared publicationYang Yang
School of Electro-mechanical Engineering, Guangdong University of Technology, Guangzhou, China, 510006
1 shared publication- Yinghua Qiu
School of Mechanical Engineering Key Laboratory of High Efficiency and Clean Mechanical Manufacture of the Ministry of Education State Key Laboratory of Advanced Equipment and Technology for Metal Forming Shandong University 250061 Jinan China
1 shared publication - Zhishan Yuan
Guangdong University of Technology
1 shared publication
Latest Publications
- 23 September 2020
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (41) , 46923-46932
Prewetting Polypropylene-Wood Pulp Fiber Composite Nonwoven Fabric for Oil–Water Separation
The removal of oil from the water surface is vital to protect the environment and living organisms against the threats posed by the industrial oily wastewater and offshore oil spills. High cost, low efficiency and environmental pollution limit the widespread use of the commercial methods of oil-water separation. In this study, the pre-wetting polypropylene-wood pulp fibre composite non-woven fabric (PWNF) has been used in the gravity-driven separation of the oil–water mixture. The pre-wetting PWNF displayed superior underwater oleophobic properties, and the underwater kerosene contact angle was 137.65° ± 4.27°. The oil–water interfacial tension in the micro-channels among the PWNF fibres prevented the oil from passing through the micro-channels, however, allowed the passage of water. The PWNF membrane maintained an excellent oil–water separation performance after repeated separation and long-term soaking cycles. The separation membrane maintained 75% and 50% of the initial separation performance after 40 repeat cycles and water immersion for more than 20 days, respectively. The separation rate of the PWNF membrane was also investigated as a function of salt solution concentration, temperature and pH. Meanwhile, the influences of pre-wetting time, pre-wetting temperature and different dyeing condition of the mixture on the separation rate were clarified. The destruction of the oil–water contact interface was suggested as the main failure mode of the developed PWNF separation membrane. The maximum kerosene height that the PWNF separation membrane could sustain was 800 mm. The obtained results confirmed that the PWNF separation membrane exhibited the high potential of widespread use in various environments for achieving efficient and stable separations, especially for the oily wastewater treatment.
- 23 September 2020
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (41) , 46923-46932
Prewetting Polypropylene-Wood Pulp Fiber Composite Nonwoven Fabric for Oil–Water Separation
The removal of oil from the water surface is vital to protect the environment and living organisms against the threats posed by the industrial oily wastewater and offshore oil spills. High cost, low efficiency and environmental pollution limit the widespread use of the commercial methods of oil-water separation. In this study, the pre-wetting polypropylene-wood pulp fibre composite non-woven fabric (PWNF) has been used in the gravity-driven separation of the oil–water mixture. The pre-wetting PWNF displayed superior underwater oleophobic properties, and the underwater kerosene contact angle was 137.65° ± 4.27°. The oil–water interfacial tension in the micro-channels among the PWNF fibres prevented the oil from passing through the micro-channels, however, allowed the passage of water. The PWNF membrane maintained an excellent oil–water separation performance after repeated separation and long-term soaking cycles. The separation membrane maintained 75% and 50% of the initial separation performance after 40 repeat cycles and water immersion for more than 20 days, respectively. The separation rate of the PWNF membrane was also investigated as a function of salt solution concentration, temperature and pH. Meanwhile, the influences of pre-wetting time, pre-wetting temperature and different dyeing condition of the mixture on the separation rate were clarified. The destruction of the oil–water contact interface was suggested as the main failure mode of the developed PWNF separation membrane. The maximum kerosene height that the PWNF separation membrane could sustain was 800 mm. The obtained results confirmed that the PWNF separation membrane exhibited the high potential of widespread use in various environments for achieving efficient and stable separations, especially for the oily wastewater treatment.