Pankaj Solanki
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Pankaj Solanki has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Bharat Kataria
Department of Nanoscience and Advanced Materials, Saurashtra University, Rajkot, India
8 shared publications - Dhananjay Dhruv
Natubhai V. Patel College of Pure and Applied Sciences, The Charutar Vidya Mandal (CVM) University, Anand, India
6 shared publications - Jaysukh H. Markna
Department of Nanoscience and Advanced Materials Saurashtra University Rajkot Gujarat India
4 shared publications J.H. Markna
3 shared publications- Naveen Agrawal
Natubhai V. Patel College of Pure and Applied Sciences, The Charutar Vidya Mandal (CVM) University, Anand, India
3 shared publications - S. D. Dhruv
Natubhai V. Patel College of Pure and Applied Sciences, The Charutar Vidya Mandal (CVM) University, Vallabh Vidyanagar, 388120, Anand, Gujarat, India
3 shared publications
Latest Publications
- 4 March 2026
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 730
Suppression of Jahn–Teller distortion and dielectric enhancement in Pr-doped GdMnO3 perovskites
- 4 March 2026
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 730
Suppression of Jahn–Teller distortion and dielectric enhancement in Pr-doped GdMnO3 perovskites
- 18 April 2025
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 711
Investigations on electronic structure and transport property modifications of La0.7Ca0.3-xKxMnO3 ceramics
- 18 April 2025
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 711
Investigations on electronic structure and transport property modifications of La0.7Ca0.3-xKxMnO3 ceramics
- 6 November 2024
- Published by Springer Nature in Interactions
- Vol. 245 (1) , 1-22
Fabrication of Tungsten/n-CdSe/Pyrographite/Brass sandwiched electronic device and transport characterization for its resistive switching applications
- 6 November 2024
- Published by Springer Nature in Interactions
- Vol. 245 (1) , 1-22
Fabrication of Tungsten/n-CdSe/Pyrographite/Brass sandwiched electronic device and transport characterization for its resistive switching applications
- 21 June 2024
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 35 (18) , 1-18
Synthesis, microstructural, rietveld refinement and optical characterizations of sol–gel grown cerium oxide ceramics
- 21 June 2024
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 35 (18) , 1-18
Synthesis, microstructural, rietveld refinement and optical characterizations of sol–gel grown cerium oxide ceramics
- Open Access
- 10 May 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (22) , 15455-15467
Synthesis, microstructural and optical characterizations of sol-gel grown gadolinium doped cerium oxide ceramics
In this study, through the utilization of the sol–gel combustion tactic, gadolinium (Gd)-doped cerium oxide (CeO2), Ce1−xGdxO2 (x = 0.00, 0.10, 0.20 and 0.30 (GDC)) ceramics were attained.
- 10 May 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (22) , 15455-15467
Open AccessSynthesis, microstructural and optical characterizations of sol-gel grown gadolinium doped cerium oxide ceramics
In this study, through the utilization of the sol–gel combustion tactic, gadolinium (Gd)-doped cerium oxide (CeO2), Ce1−xGdxO2 (x = 0.00, 0.10, 0.20 and 0.30 (GDC)) ceramics were attained.
- 9 January 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (2) , 025923
Optimisation and numerical analysis of highly efficient CGSe-based thin film solar cell
Among the various chalcopyrites compounds used in photovoltaic devices, Copper Gallium Selenium (CGSe) turns out as an underperformer due to its limited photovoltaic performance, So far highest efficiency measured is about 11.9%. This paper investigates the possibilities for efficiency enhancement for the CuGSe layer in Cu2O/CGSe/TiO2/ZnO thin film solar cell structure using the SCAPS-1D simulation program. The short circuit current (Jsc) and power conversion efficiency (PCE) is 30.77 mA cm−2 and 27.10%, with open-circuit voltage (Voc) and fill factor (FF) of 1.03 V and 84.72% respectively. Furthermore, we evaluated some specific parameters of TiO2/CGSe heterostructure, such as the influence of layer thickness, operating temperature, the effect of defect density and acceptor density of CGSe layer, metal work function, and the effect of series and shunt resistance on cell performance. We investigated that combining TiO2 as an ETL and Cu2O as HTL with a CGSe absorber layer is novel and promising, which results in higher power conversation efficiency and improves other PV parameters. The application of CGSe/TiO2 heterojunction in a simulated model offers a viable method for the development of high-efficiency solar cell devices.
- 9 January 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (2) , 025923
Optimisation and numerical analysis of highly efficient CGSe-based thin film solar cell
Among the various chalcopyrites compounds used in photovoltaic devices, Copper Gallium Selenium (CGSe) turns out as an underperformer due to its limited photovoltaic performance, So far highest efficiency measured is about 11.9%. This paper investigates the possibilities for efficiency enhancement for the CuGSe layer in Cu2O/CGSe/TiO2/ZnO thin film solar cell structure using the SCAPS-1D simulation program. The short circuit current (Jsc) and power conversion efficiency (PCE) is 30.77 mA cm−2 and 27.10%, with open-circuit voltage (Voc) and fill factor (FF) of 1.03 V and 84.72% respectively. Furthermore, we evaluated some specific parameters of TiO2/CGSe heterostructure, such as the influence of layer thickness, operating temperature, the effect of defect density and acceptor density of CGSe layer, metal work function, and the effect of series and shunt resistance on cell performance. We investigated that combining TiO2 as an ETL and Cu2O as HTL with a CGSe absorber layer is novel and promising, which results in higher power conversation efficiency and improves other PV parameters. The application of CGSe/TiO2 heterojunction in a simulated model offers a viable method for the development of high-efficiency solar cell devices.
- 8 November 2023
- Published by Elsevier in Ceramics International
- Vol. 50 (2) , 3351-3365
Complex dielectric and impedance analysis in Dy1-XPrXMnO3 compounds: Partial substitution effects
- 8 November 2023
- Published by Elsevier in Ceramics International
- Vol. 50 (2) , 3351-3365
Complex dielectric and impedance analysis in Dy1-XPrXMnO3 compounds: Partial substitution effects
- 20 July 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (8) , 085935
Structural, optical, and dielectric characteristics of pulsed laser deposited SnO2-TiO2 composite thin films
Pulsed laser deposition was used to fabricate the thin films of SnO2 and SnO2-TiO2 composites on FTO substrates and these films were characterized to understand the effect of TiO2 on the structural, optical, and electrical properties of SnO2. The Tauc plots confirm that the composite films have a higher band gap energy than SnO2. EDX spectra demonstrate that the thin films contain Ti, Sn, and O ions. The photoluminescence (PL) spectra indicate three blue emission bands at wavelengths of 410, 435, and 460 nm and these are due to the oxygen vacancies or interstitial oxygen ions and defect-related states. These films are n-type semiconductors as verified by the Hall Effect measurements. At the interface of the film, the frequency dependence of the dielectric at room temperature reveals that as the frequency increases, the dielectric constant and dielectric losses decrease. SnO2 film has a significantly higher a.c. conductivity than the SnO2-TiO2 composite films. The correlated barrier hopping (CBH) mechanism is responsible for the conduction behaviour and obeys Johncher’s power law (n < 1). The addition of TiO2 in SnO2 affects the structural, optical, dielectric, and ac conductivity of films at room temperature.
- 20 July 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (8) , 085935
Structural, optical, and dielectric characteristics of pulsed laser deposited SnO2-TiO2 composite thin films
Pulsed laser deposition was used to fabricate the thin films of SnO2 and SnO2-TiO2 composites on FTO substrates and these films were characterized to understand the effect of TiO2 on the structural, optical, and electrical properties of SnO2. The Tauc plots confirm that the composite films have a higher band gap energy than SnO2. EDX spectra demonstrate that the thin films contain Ti, Sn, and O ions. The photoluminescence (PL) spectra indicate three blue emission bands at wavelengths of 410, 435, and 460 nm and these are due to the oxygen vacancies or interstitial oxygen ions and defect-related states. These films are n-type semiconductors as verified by the Hall Effect measurements. At the interface of the film, the frequency dependence of the dielectric at room temperature reveals that as the frequency increases, the dielectric constant and dielectric losses decrease. SnO2 film has a significantly higher a.c. conductivity than the SnO2-TiO2 composite films. The correlated barrier hopping (CBH) mechanism is responsible for the conduction behaviour and obeys Johncher’s power law (n < 1). The addition of TiO2 in SnO2 affects the structural, optical, dielectric, and ac conductivity of films at room temperature.
- 23 November 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 76, 573-578
Investigation on transport properties of GdMnO3 based bilayer thin films
- 23 November 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 76, 573-578
Investigation on transport properties of GdMnO3 based bilayer thin films