ABAhmet Böğrek

Ahmet Böğrek

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ahmet Böğrek has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • GÖRÜNTÜ İŞLEME TABANLI HASSAS TARIM ARACININ TASARLANMASI VE GERÇEKLEŞTİRİLMESİ

    by Harun Sümbül, Ahmet Böğrek, Abdurrahman Tunçer, Kenan Yıldırım

    Sürdürülebilir bir tarım için, bağ, bahçe veya tarlalarda erişilmesi zor ve büyük traktörlerin çalışamayacağı alanlarda ot biçme faaliyetlerini hızlı bir şekilde yapılmasına imkân veren ve yorucu olmayan bir yöntemle biçebilen, elektrikle çalışan, şarjlı, uzaktan kumandalı, hava şartlarından bağımsız çalışabilen, zararlı haşerelerden etkilenmeyen çevre dostu, kullanım ve kumandası kolay bir tarım makinesine ihtiyaç duyulduğu görülmektedir. Bu çalışmada, gerçek zamanlı görüntü işleme tekniklerini kullanarak ot yoğunluğunu tespit eden ve otomatik hız kontrolü sağlayan bir sistem başarıyla geliştirilmiştir. Sistem, düşük maliyetli donanım bileşenleri ve açık kaynak kodlu yazılım kütüphaneleri kullanılarak geliştirilmiştir. HSV renk uzayı tabanlı segmentasyon ve morfolojik işlemlerin kombinasyonu, etkili bir ot tespit çözümü sunmuştur. Lineer interpolasyon ile geliştirilen hız kontrol mekanizması, ot yoğunluğuna duyarlı dinamik bir kontrol sağlamıştır. Geliştirilen sistem, hassas tarım uygulamaları için umut verici bir yaklaşım sunmaktadır. Kaynak kullanım verimliliği, enerji optimizasyonu ve çevresel sürdürülebilirlik açısından önemli avantajlar sağlayabilecek potansiyele sahiptir.

  • Yoğun Bakım, Yanık Tedavi ve Fizik Tedavi Kombine Hasta Karyolasının Kavramsal Tasarımı

    by Harun Sümbül, Ahmet Böğrek, Abdurrahman Tunçer

    İnsan yaşamının yaklaşık üçte biri yatakta geçer. Özellikle yanık tedavi ve yoğun bakım ünitesinde yatan bakıma muhtaç insanlar genellikle bütün gününü yatakta geçirirler. Uzun süre yoğun bakım ünitesinde yatan hastalar, mevcut hastalıklarının yanında farklı risklerle de karşı karşıya kalabilmektedirler. Bu çalışmanın amacı; özellikle mobilizasyonu riskli olan gruplar için yoğun bakım ve yanık tedavi ünitesinde yatıp aynı zamanda fizik tedavi gereksinimi duyulan hastaların sedye aracılığı ile fizik tedavi ünitesine taşınmasını önleyecek, yoğun bakım ünitesinde iken bu tedaviyi almasına imkân sağlayacak kombine bir yatak ve yatak kontrol sisteminin tasarlanmasıdır.


  • A Novel Engine Vibration Measurement System based on the MEMS Sensor

    by Ahmet Böğrek, Harun Sümbül

    Internal combustion engines cause the engine to vibrate with a certain acceleration due to the oscillation of many components and combustion events during operation. The resulting vibrations can give information about the regular operation of the engine or a possible me-chanical failure. For this reason, it is very important to measure and interpret these vibrations in a healthy way. In this study, a microcontroller-based measurement system was designed and implemented to examine the vibrations of a 4-stroke, 3-cylinder and water-cooled diesel engine at different speeds, under loaded and unloaded conditions. Vibration results for three different measure-ment points at different engine speeds (900,1200,1600,2000,2400,2800 and 3200rpm) were recorded in the data recording system for 60s. The recorded data were filtered by the EMA method and the results were analyzed by the FFT method. According to the results obtained, it has been determined that there is a close linear rela-tionship between engine speed and vibrations. Results of measurement point 1 (Cylinder head) Higher vibration harmonics were measured compared to measurement points 2 (engine block) and 3 (Flywheel housing). The highest vibrations occurred at 3200rpm under loaded and unloaded operating conditions. As a result; It has been seen that the measurement sys-tem developed using MEMs-based accelerometers can be successfully applied to measure engine vibrations.


  • Demiryolu Ulaşım Güvenliği için Makinist Uyarım Sistemi Kavramsal Tasarımı ve Simülasyonu

    by Harun Sümbül, Ahmet Bogrek, Abdurrahman Tunçer

    Bu çalışmada, demiryollarında güvenli yolculuk için deray anını tespit ederek makiniste bilgi veren bir sistemin kavramsal tasarımı gerçekleştirilmiş olup sistem aynı zamanda bir bilgisayar programı ile simüle edilmiştir. Buna göre bir elektronik devre çizim programı (Proteus ISIS Labcenter Electronics 7.7 SP2) yardımı ile kavramsal tasarıma ait bir devre çizilmiştir. Devre üzerinde, treni temsilen sinyal üreteci; titreşimlerin ve kapasitif değerlerin algılandığını temsil eden butonlar, alınan sinyallerin yükseltildiği opamplı yükselteç devresi, iki algılayıcıdan da alınan verilere göre makiniste bilgi gönderilmesine karar verecek olan bir karşılaştırıcı (VE kapısı), sinyallerin izlendiği dijital osiloskop ve deray algılandığında makinist uyarımında kullanılacak sesli/ışıklı uyarım sistemi (buzzer) bulunmaktadır. Demiryolu titreşimleri ve oluşan frekans aralıkları için ilgili literatür göz önüne alınarak simülasyon devresinde sinyal üreteci frekansı 1,5KHz ve genliği ise 5v üçgen dalga DC şeklinde ayarlanmıştır. Eşik değer olarak 2.5v seçilmiştir. Buna göre karşılaştırıcı çıkışındaki değer, her iki algılayıcıdan da bilgi alındığı anda aktif olmuştur. Simülasyona göre deray 300 ms sürmüş ve 1/3 saniye gibi kısa bir sürede tespit edilerek çıkış birimleri aktif edilmiştir. Simülasyon sonuçlarına göre önerilen kavramsal modelin gerçek hayatta başarılı bir şekilde kullanılabileceği ve böylece deray kaynaklı tren kazalarının önüne geçebileceği öngörülmüştür. Bunun neticesi olarak da ölümlü / yaralanmalı / maddi kayıplı kazaları engellenerek ülkemize tren ile güven ile ulaşım konusunda yeni bir literatür kazandırılacağına inanılmaktadır.


  • Open Access

    Development of Driver Analysis System to Improve Driving Comfort and to Reduce Mechanical Abrasion in Vehicles

    by Ahmet Bogrek, Harun Sumbul

    The purpose of this study is; to develop a system that can detect road disturbances and can warn the driver. For this purpose, a measurement method which tracking as a 3-axis of the road situation with a semiconductor MEMS-based accelerometer has been developed to be used to detect vehicle vibration and drive conditions which has a serious effect on the driving quality of the road. With the developed measuring system, road wear and tear can be successfully reported. Thanks to the improved system, the driver can also be warned by detecting vehicle suspension damage. In addition, a driver performance report may be drawn up under the project that is very important for fleet and service owners (universities, municipalities and other similar public and corporate entities). Thus, the damage caused by the bad use of the vehicles can be reduced to the minimum; the operating costs can be reduced.The sensor on the measurement card developed for this purpose is placed at the lower control arm portion point of the vehicle to be used in the test drives (Renault Thalia II/Symbol brand 2012 model). A testing road with a length of 135 meters was constructed and test runs were carried out at different speeds (10km/h, 20 km/h, 30 km/h, 40 km/h and 50 km/h). 7 bumps with varying dimensions were placed on the created road route at intervals of 5 meters. The obtained data were recorded on the SD card and then analyzed in the Matlab program by filtering it from the noise. A total of 2099 data were analyzed. As a result, driver performances can be categorized successfully (Normal, Medium, Bad, Very Bad, Very Very Bad) for each test drive according to the speed and condition of the road bumps. Sound and light stimulation of the driver when the bulge and the pit are entered in the test runs repeated in the result of the determined threshold acceleration value after the reference driving has also been successfully achieved.