Sara Kazemi Yazdi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Sara Kazemi Yazdi has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
Hia Hung Yi
University of Nottingham
2 shared publicationsKashwin Selvanathan
University of Nottingham
2 shared publicationsKishaan Ragu
University of Nottingham
2 shared publicationsReza Godary
University of Nottingham
2 shared publications- Zhiyuan Chen
School of Computer Science, University of Nottingham Malaysia, Semenyih, Selangor, Malaysia
2 shared publications - Ali Taheri Mirghaed
Department of Aquatic Animal Health, Faculty of Veterinary Medicine University of Tehran Tehran Iran
1 shared publication
Latest Publications
- Open Access
- 30 July 2026
- Published by Elsevier in SSRN Electronic Journal
Optimization of Daily Irradiance for A. platensis biomass production: Annual Case Study for Sustainable Production in Cibinong, Bogor-Indonesia
The optimization of light availability is critical for enhancing biomass and high-value metabolite yields in Arthrospira platensis cultivation, particularly under outdoor conditions subject to seasonal variability. This study evaluated the effects of daily irradiance control on biomass, protein, and phycocyanin productivity in two columns inexpensive photobioreactors (PBRs) made with polyethylene (PE) of different diameters (PBR d-20 and PBR d-50) over a one-year period in Cibinong, Bogor, Indonesia. Four irradiance levels (I-100, I-50, I-30, I-10) were tested to assess productivity, phycocyanin content, and operational safety expressed as the percentage of safe days per month. The study identified the safe levels throughout the year for biomass production, showcasing I-50 as the best treatment for both systems. Volumetric and aerial productivity were also compared with PBRd-20 showing the highest volumetric production for biomass (198.76 mg/(L.day)), protein (106.22 mg/(L.day)), and phycocyanin production (21.86 mg/(L.day)). This research was aimed to be an optimization in bringing net-zero initiative to decentralized communities in the future.
- 30 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessOptimization of Daily Irradiance for A. platensis biomass production: Annual Case Study for Sustainable Production in Cibinong, Bogor-Indonesia
The optimization of light availability is critical for enhancing biomass and high-value metabolite yields in Arthrospira platensis cultivation, particularly under outdoor conditions subject to seasonal variability. This study evaluated the effects of daily irradiance control on biomass, protein, and phycocyanin productivity in two columns inexpensive photobioreactors (PBRs) made with polyethylene (PE) of different diameters (PBR d-20 and PBR d-50) over a one-year period in Cibinong, Bogor, Indonesia. Four irradiance levels (I-100, I-50, I-30, I-10) were tested to assess productivity, phycocyanin content, and operational safety expressed as the percentage of safe days per month. The study identified the safe levels throughout the year for biomass production, showcasing I-50 as the best treatment for both systems. Volumetric and aerial productivity were also compared with PBRd-20 showing the highest volumetric production for biomass (198.76 mg/(L.day)), protein (106.22 mg/(L.day)), and phycocyanin production (21.86 mg/(L.day)). This research was aimed to be an optimization in bringing net-zero initiative to decentralized communities in the future.
- Open Access
- 28 April 2026
- Published by Elsevier in SSRN Electronic Journal
Structure-Performance of Optimized SiO₂-Modified PVDF-PVP Hollow Fiber Ultrafiltration Membranes for Enhanced Antifouling in Palm Oil Mill Effluent Treatment
This study investigated the critical challenge of optimizing ultrafiltration membranes for high-strength wastewater treatment by establishing a definitive structure–property–performance relationship for SiO2-modified PVDF–PVP hollow fiber membranes. Membranes with varying SiO2 loadings (0–1.5 g) were fabricated via dry-jet wet spinning and systematically characterized using SEM, EDX, FTIR, contact angle, porosity, MWCO, and fouling analyses. The incorporation of SiO2 significantly enhanced membrane hydrophilicity and porosity, with the contact angle decreasing from 88.20° to 58.05° and porosity increasing from 72.5% to 82.5%, leading to a substantial improvement in pure water flux (from 86.92 to 236.13 L/m2·h). Notably, the membrane containing 1.0 g SiO2 exhibited the best overall performance, achieving the highest POME flux (69.16 L/m2·h) alongside superior antifouling properties, including flux recovery of 94.68%, high reversible fouling (88.9%), and minimal irreversible fouling (5.52%). The novelty of this study lies in identifying 1.0 g SiO2 as the optimal loading that maximizes performance by forming a well-dispersed hydrophilic network within the polymer matrix, thereby enhancing water transport while maintaining pore integrity and minimizing foulant adhesion. In contrast, higher SiO2 loadings (≥1.25 g) resulted in nanoparticle agglomeration, pore blockage, and structural heterogeneity, leading to reduced permeability and performance deterioration. Additionally, MWCO and dye-rejection analyses confirmed high selectivity, with a 94.06% rejection of Reactive Red 120 and ~97–98% removal of Crystal Violet. %). EDX verified uniform SiO2 dispersion, and FTIR confirmed preservation of C–F, C=O, and Si–O–Si functional groups. Overall, this work provides a mechanistic understanding and practical guideline for tuning nanoparticle loading in nanocomposite membranes, positioning the 1.0 g SiO2 membrane as an optimal candidate for sustainable POME and industrial wastewater treatment applications.
- 28 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessStructure-Performance of Optimized SiO₂-Modified PVDF-PVP Hollow Fiber Ultrafiltration Membranes for Enhanced Antifouling in Palm Oil Mill Effluent Treatment
This study investigated the critical challenge of optimizing ultrafiltration membranes for high-strength wastewater treatment by establishing a definitive structure–property–performance relationship for SiO2-modified PVDF–PVP hollow fiber membranes. Membranes with varying SiO2 loadings (0–1.5 g) were fabricated via dry-jet wet spinning and systematically characterized using SEM, EDX, FTIR, contact angle, porosity, MWCO, and fouling analyses. The incorporation of SiO2 significantly enhanced membrane hydrophilicity and porosity, with the contact angle decreasing from 88.20° to 58.05° and porosity increasing from 72.5% to 82.5%, leading to a substantial improvement in pure water flux (from 86.92 to 236.13 L/m2·h). Notably, the membrane containing 1.0 g SiO2 exhibited the best overall performance, achieving the highest POME flux (69.16 L/m2·h) alongside superior antifouling properties, including flux recovery of 94.68%, high reversible fouling (88.9%), and minimal irreversible fouling (5.52%). The novelty of this study lies in identifying 1.0 g SiO2 as the optimal loading that maximizes performance by forming a well-dispersed hydrophilic network within the polymer matrix, thereby enhancing water transport while maintaining pore integrity and minimizing foulant adhesion. In contrast, higher SiO2 loadings (≥1.25 g) resulted in nanoparticle agglomeration, pore blockage, and structural heterogeneity, leading to reduced permeability and performance deterioration. Additionally, MWCO and dye-rejection analyses confirmed high selectivity, with a 94.06% rejection of Reactive Red 120 and ~97–98% removal of Crystal Violet. %). EDX verified uniform SiO2 dispersion, and FTIR confirmed preservation of C–F, C=O, and Si–O–Si functional groups. Overall, this work provides a mechanistic understanding and practical guideline for tuning nanoparticle loading in nanocomposite membranes, positioning the 1.0 g SiO2 membrane as an optimal candidate for sustainable POME and industrial wastewater treatment applications.
- 1 December 2023
- Published by Springer Nature
- p. 145-163
Feature Importance Study for Biogas Production from POME Treatment Plants Using Out-of-Bag Permutation
- 1 December 2023
- Published by Springer Nature
- p. 145-163
Feature Importance Study for Biogas Production from POME Treatment Plants Using Out-of-Bag Permutation
- Open Access
- 9 June 2023
- Published by IWA Publishing in Journal of Water and Climate Change
- Vol. 14 (7) , 2294-2308
Assessing machine learning tools for methane emission prediction from POME treatment in Malaysia
Palm oil mill effluent (POME) treatment is an anthropogenic activity contributing to global warming through methane emission. The inability to address this issue would deem true the catastrophic impacts of global temperatures exceeding 2 °C as was predicted by the Intergovernmental Panel on Climate Change (IPCC) in 2015. Little research and development exist on GHGs monitoring and methane emissions in POME treatment facilities as opposed to research on improving biogas production. A methane emission prediction tool based on machine learning models and tools can address this problem and consequently facilitate the development of efficient carbon neutrality approaches in POME treatment plants. In this study, six regression models were explored alongside their kernels using eight predictors, linking towards methane emission volume. The best model found was support vector machine (SVM), producing performance metrics for R2 and RMSE with values of 0.45 and 0.749, respectively.
- 9 June 2023
- Published by IWA Publishing in Journal of Water and Climate Change
- Vol. 14 (7) , 2294-2308
Open AccessAssessing machine learning tools for methane emission prediction from POME treatment in Malaysia
Palm oil mill effluent (POME) treatment is an anthropogenic activity contributing to global warming through methane emission. The inability to address this issue would deem true the catastrophic impacts of global temperatures exceeding 2 °C as was predicted by the Intergovernmental Panel on Climate Change (IPCC) in 2015. Little research and development exist on GHGs monitoring and methane emissions in POME treatment facilities as opposed to research on improving biogas production. A methane emission prediction tool based on machine learning models and tools can address this problem and consequently facilitate the development of efficient carbon neutrality approaches in POME treatment plants. In this study, six regression models were explored alongside their kernels using eight predictors, linking towards methane emission volume. The best model found was support vector machine (SVM), producing performance metrics for R2 and RMSE with values of 0.45 and 0.749, respectively.
- Open Access
- 3 May 2022
- Published by The European Research Journal in The European Research Journal
- Vol. 8 (3) , 320-325
Extraction and biological evaluation of Mycobacterium bovis extracellular vesicles as adjuvant and candidates for bovine tuberculosis vaccine
Objectives: BCG vaccine is the only virtual vaccine that has significantly helped control tuberculosis for 80 years. Bacteria naturally release extracellular vesicles (EVs) in different environments during the growth process. The use of extracellular vesicles is an alternative way to transfer ligands that are detected by host cells. Vesicles range in size from 50 nm to 250 nm in diameter and contain phospholipids, proteins, and lipopolysaccharides, and can carry additional factors such as toxins, adhesive, or immune system compounds that are important in pathogens. Therefore, this study aimed to evaluate these compounds as adjuvants or candidates for the bovine tuberculosis vaccine. Methods: In the present study, Mycobacterium bovis standard CRBIP7.121 was used. Extraction of membrane vesicles after mass culture was performed by a method based on ultracentrifugation and deoxycholate. After preparation and staining, the vesicles were examined by electron microscopy. Sample analysis was also performed by SDS-PAGE. The presence of LPS in the sample was measured by the LAL test. In addition, the harmlessness of bacterial EVs and the absence of any toxic agents in the sample were confirmed by pyrogenic tests in rabbits. Results: The protein content of membrane vesicles is equal to 1.25 and 1.32 mg/ml. In SDS-page evaluation, bands of 35, 40, 50, and 70 kDa were observed and then membrane vesicles were observed and confirmed by electron microscopy. The amount of vesicle toxin contained by the LAL test was reported in the permissible range. Conclusions: Discussion of the data obtained from the above research shows that at different stages of the purification process, EVs fully retained their spatial and natural form and lacked impurities. Therefore, due to the importance of external vesicles in developing immune responses, EVs extracted from M. bovis CRBIP7.121 can be considered a useful and effective immunogen against Mycobacterium infections.
- 3 May 2022
- Published by The European Research Journal in The European Research Journal
- Vol. 8 (3) , 320-325
Open AccessExtraction and biological evaluation of Mycobacterium bovis extracellular vesicles as adjuvant and candidates for bovine tuberculosis vaccine
Objectives: BCG vaccine is the only virtual vaccine that has significantly helped control tuberculosis for 80 years. Bacteria naturally release extracellular vesicles (EVs) in different environments during the growth process. The use of extracellular vesicles is an alternative way to transfer ligands that are detected by host cells. Vesicles range in size from 50 nm to 250 nm in diameter and contain phospholipids, proteins, and lipopolysaccharides, and can carry additional factors such as toxins, adhesive, or immune system compounds that are important in pathogens. Therefore, this study aimed to evaluate these compounds as adjuvants or candidates for the bovine tuberculosis vaccine. Methods: In the present study, Mycobacterium bovis standard CRBIP7.121 was used. Extraction of membrane vesicles after mass culture was performed by a method based on ultracentrifugation and deoxycholate. After preparation and staining, the vesicles were examined by electron microscopy. Sample analysis was also performed by SDS-PAGE. The presence of LPS in the sample was measured by the LAL test. In addition, the harmlessness of bacterial EVs and the absence of any toxic agents in the sample were confirmed by pyrogenic tests in rabbits. Results: The protein content of membrane vesicles is equal to 1.25 and 1.32 mg/ml. In SDS-page evaluation, bands of 35, 40, 50, and 70 kDa were observed and then membrane vesicles were observed and confirmed by electron microscopy. The amount of vesicle toxin contained by the LAL test was reported in the permissible range. Conclusions: Discussion of the data obtained from the above research shows that at different stages of the purification process, EVs fully retained their spatial and natural form and lacked impurities. Therefore, due to the importance of external vesicles in developing immune responses, EVs extracted from M. bovis CRBIP7.121 can be considered a useful and effective immunogen against Mycobacterium infections.