VMVincent Meslier

Vincent Meslier

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Vincent Meslier has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Influence of different ageing conditions on the delamination behaviour of photovoltaic modules

    by Vincent Meslier

    Influence de différents vieillissements sur la délamination de modules photovoltaïques: La délamination de modules photovoltaïques (PV) est considérée comme le phénomène de dégradation à long-terme le plus important. Dans le but de mieux comprendre et de caractériser ce problème, ces travaux de thèses s'intéressent à la tenue en vieillissement d'une polyoléfine thermoplastique (TPO) grâce à une approche couplée expérimentale et numérique. Ses propriétés visco-élastiques, hyper-élastiques, d'expansion thermique et son adhésion avec le verre sont suivies au cours de différents vieillissements. Ses changements de microstructure sont aussi surveillés afin de pouvoir expliquer les évolutions macroscopiques. Les vieillissements accélérés sont réalisés en environnement contrôlé dans une enceinte climatique. Ceci permet de proposer des modèles de dégradation des propriétés de cette TPO en fonction de l'humidité, la température et l'exposition UV. Ces vieillissements sont ensuite comparés à un vieillissement naturel effectué sur le site de l'INES au Bourget-du-Lac en France.En parallèle de cette campagne expérimentale, deux modèles de simulation par éléments finis sont réalisés sous Abaqus®. Le premier vise à reproduire le procédé de pelage à 180° servant à caractériser l'adhésion entre la TPO et le verre. Ce modèle utilise une loi matériau visco-hyper-élastique et permet d'identifier, par analyse inverse, les paramètres de l'interface TPO/verre grâce à une loi CZM (Cohesive Zone Model). Les propriétés de l'interface sont ensuite utilisées dans un autre modèle visant à décrire le comportement d'un module PV vieilli au cours de cycles thermiques. Les sites préférentiels de délamination des modules PV sont identifiés spatialement et temporellement au cours d'un cycle thermique.Les résultats obtenus donnent une solide base scientifique sur laquelle des recommandations techniques seront prodiguées afin d'accroître la fiabilité des futures générations de modules PV. Ce modèle de simulation est le premier, à notre connaissance, à prendre en compte le comportement vieilli de polymères au sein d'un module PV.

  • Numerical simulation of the delamination behavior of photovoltaic modules

    by Vincent Meslier, Bertrand Chambion, Jean-Luc Bouvard, Pierre-Olivier Bouchard


  • Thermal Expansion Behavior of a Thermoplastic Polyolefin for Photovoltaic Application Over Hygrothermal Aging

    by Vincent Meslier, Bertrand Chambion, Pierre-Olivier Bouchard, Jean-Luc Bouvard

    The thermal expansion behavior of polymers is a crucial property for manufacturing photovoltaic (PV) modules. The thermal expansion mismatch between the different module components induces residual stresses in the structure after manufacturing. Some of them are located at the interface between materials, leading to delamination and reliability issues during the PV module lifetime. For tandem applications, the thermal expansion mismatch is also an issue since it leads to the separation between the bottom and top cells. In this article, the thermal expansion behavior of a thermoplastic polyolefin (TPO) encapsulant used in the PV industry is assessed by stereo digital image correlation. This contactless method measures the thermal expansion in the two directions of the polymer thin film. The method is accurate enough to capture transition phases of the material, namely the crystallites fusion and formation. The thermal expansion behavior of the TPO thin film is shown to be anisotropic and dependent on its thermal history. The material contracts when heated, both after manufacturing and after aging; this has not yet been investigated. The aging temperature has an influence on the thermal contraction temperature but does not erase the shrinking behavior. The thermal expansion behavior is explained by a microstructural approach. The microstructure is investigated by differential scanning calorimetry. After crystallites melting, the molecular mobility and residual internal stresses account for the observed shrinking behavior. This behavior may affect the reliability of PV modules through delamination, cells cracks, or separation of the top and bottom cells.


  • Open Access

    Effect of the cooling rate on encapsulant's crystallinity and optical properties, and photovoltaic modules' lifetime

    by Vincent Meslier, Bertrand Chambion, Amandine Boulanger, Ichrak Rahmoun, Fabien Chabuel, Timea Bejat

    Since the renewable energy thrive, performances and lifetime of photovoltaic (PV) modules have been one of the big international concern. The mechanical bonding between the different components and the materials' choice can significantly improve both performances and lifetime of PV modules. The manufacturing process plays also a significant part in the modules lifetime [G. Oreski, B. Ottersböck, A. Omazic, Degradation Processes and Mechanisms of Encapsulants, in Durability and Reliability of Polymers and Other Materials in Photovoltaic Modules (Elsevier, 2019), pp. 135–152]. This work deals with the controlled cooling part of the manufacturing process. The aim is to characterize its influence on an encapsulant properties, and its influences on modules degradation. This work is a part of improving both performances and lifetime of PV modules. First, the work focuses on describing the real temperature seen by a thermoplastic polyolefin encapsulant during the lamination process. A multi-chamber R&D laminator is used and studied in order to better know the industrial equipment. Results show that the cooling process reduces the time to cool down by a factor of ∼5 compared to natural air convection. Secondly, the material's micro-structure is analysed by Differential Scanning Calorimetry (DSC). The impact of the process is quantified. It does have an influence on the encapsulant crystallites' size distribution without modifying the total crystallinity. Thirdly, the impact of the cooling process on optical properties is investigated. Using spectrophotometry and haze-metry optical characterization, coupled with a known light spectrum, the light intensity coming out from the material is analysed. Results show that the cooling process does not have any influence on transmittance nor reflectance. However, a 34% reduction in the haze factor is recorded when using the industrial laminator cooling process. Fourthly, mechanical bond strength between glass and encapsulant is characterized over ageing. Normalized 10 mm width strips are used to estimate the bond strength. It demonstrates that applying pressure during cooling does not influence the bond strength between glass and encapsulant after 1000 h of damp heat ageing. Finally, impact of the cooling process over ageing on PV modules is discussed. Two accelerating ageing methods, 300 Thermal Cycles and 1000 h damp heat, are used to speed up ageing processes. The electrical components of the PV modules are analysed and used to assess the modules' degradation. Modules manufactured with the cooling process are more sensitive to damp heat after 500 h than modules cooled by natural convection. No significant differences were found in thermal cycling ageing.