Razaq Ferhadi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Razaq Ferhadi has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Mand Kamal Askar
Highway and Bridge Engineering, Technical College of Engineering, Duhok Polytechnic University (DPU) , Duhok , Kurdistan Region , Iraq
2 shared publications Lawend K. Askar
Highways and Bridges Engineering, Technical College of Engineering, Duhok Polytechnic University (DPU), Kurdistan Region, Duhok, Iraq
1 shared publication- Riadh Al-Mahaidi
Swinburne University of Technology
1 shared publication Yaman Al-Kamaki
1 shared publication- Yaman Sami Shareef Al-Kamaki
Highway and Bridge Engineering Department, Technical College of Engineering, Duhok Polytechnic University (DPU), Duhok 42001, Kurdistan Region, Iraq
1 shared publication
Latest Publications
- Open Access
- 12 October 2025
- Published by Duhok Polytechnic University in Dasinya Journal for Engineering and Informatics
- Vol. 1 (1)
Finite Element Modelling and Experimental Validation of CFRP-Strengthened Reinforced Concrete Beams
Extreme loading and harsh environmental exposure are two of the many variables that can lead to reinforced concrete (RC) beam deterioration. Nowadays, the recommended technique for extending the life duration of degraded structures is the use of fiber-reinforced polymer (FRP) strengthening materials. FRP composites have been utilized to strengthen concrete members since the late 1970s in order to increase their ductility and load-bearing capability. Although FRP has been effectively utilized to repair concrete beams that have deteriorated due to both internal and external influences, the use of appropriate software limits the numerical modeling of Carbon Fiber-Reinforced Polymer (CFRP) for RC beam strengthening. To investigate the structural response, FEMs were developed in ATENA-GiD, aiming to clarify the behavior of both the control beams and those repaired with CFRP, and to assess their load-bearing capacity. This is a unique software that can be used only for RC elements. It can be stated from the experimental results taken from previously published work that the load-bearing capacity and deflection for the control beam were 47.7 kN and 35.7 mm, respectively. By adding one unidirectional CFRP sheet as U-wraps, the load increased and deflection decreased by 24.9 % and 48.2 %, respectively. When using the same test results for verification using FE software, the load-bearing capacity and deflection for the simulated model were 49.4 kN and 37.6 mm, respectively. When adding the CFRP sheet to the model, similar to that of experimental work done. After the analysis stage, the load increased and deflection decreased by 24.1 % and 52.1 %, respectively. This indicates that FRP has become a powerful composite material for strengthening existing RC structures.
- 12 October 2025
- Published by Duhok Polytechnic University in Dasinya Journal for Engineering and Informatics
- Vol. 1 (1)
Open AccessFinite Element Modelling and Experimental Validation of CFRP-Strengthened Reinforced Concrete Beams
Extreme loading and harsh environmental exposure are two of the many variables that can lead to reinforced concrete (RC) beam deterioration. Nowadays, the recommended technique for extending the life duration of degraded structures is the use of fiber-reinforced polymer (FRP) strengthening materials. FRP composites have been utilized to strengthen concrete members since the late 1970s in order to increase their ductility and load-bearing capability. Although FRP has been effectively utilized to repair concrete beams that have deteriorated due to both internal and external influences, the use of appropriate software limits the numerical modeling of Carbon Fiber-Reinforced Polymer (CFRP) for RC beam strengthening. To investigate the structural response, FEMs were developed in ATENA-GiD, aiming to clarify the behavior of both the control beams and those repaired with CFRP, and to assess their load-bearing capacity. This is a unique software that can be used only for RC elements. It can be stated from the experimental results taken from previously published work that the load-bearing capacity and deflection for the control beam were 47.7 kN and 35.7 mm, respectively. By adding one unidirectional CFRP sheet as U-wraps, the load increased and deflection decreased by 24.9 % and 48.2 %, respectively. When using the same test results for verification using FE software, the load-bearing capacity and deflection for the simulated model were 49.4 kN and 37.6 mm, respectively. When adding the CFRP sheet to the model, similar to that of experimental work done. After the analysis stage, the load increased and deflection decreased by 24.1 % and 52.1 %, respectively. This indicates that FRP has become a powerful composite material for strengthening existing RC structures.