David Roberto Domínguez-Lozoya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
David Roberto Domínguez-Lozoya has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Aldo Figueroa
Universidad Autónoma del Estado de Morelos
5 shared publications - Sergio Cuevas
Universidad Nacional Autónoma de México
5 shared publications - José Carlos Domínguez-Lozoya
Department of Natural and Exact Sciences, Autonomous University of Sinaloa, Culiacan 80040, Mexico
3 shared publications - Raul Avalos-Zuniga
CICATA-Querétaro, Instituto Politécnico Nacional, Cerro Blanco 141, Colinas del Cimatario, Santiago de Querétaro 76090, Mexico
3 shared publications - Saúl Piedra
Centro de Ingeniería y Desarrollo Industrial (CIDESI)
3 shared publications - Eduardo Ramos
Renewable Energy Institute, Universidad Nacional Autónoma de México (UNAM), Xochicalco S/N, Temixco 62580, Morelos, Mexico
2 shared publications
Latest Publications
- Open Access
Reverse Steady Streaming Induced by a Freely Moving Wavy Wall
In this work, we present a theoretical and experimental investigation of the fluid–structure interaction between a freely moving wall and an oscillatory flow. Our objective is to elucidate the coupling mechanism between the fluid and the oscillating body that gives rise to reverse streaming, that is, the reversal in the rotation direction of the resulting steady vortices, and to apply this analysis to the case of a freely moving wavy wall. The flow is analyzed theoretically based on a two-dimensional model and an analytical solution is obtained using a perturbation method. Experimental results based on Particle Image Velocimetry are also presented, where an oscillatory flow generated by an electromagnetic force in an electrolyte layer drives a wavy wall floating on the surface. The results confirm the occurrence of reverse streaming and demonstrate that the flow dynamics depend on the density ratio between the freely moving solid and the fluid. The analytical solution qualitatively captures the streaming reversal observed in the experiments.
Open AccessReverse Steady Streaming Induced by a Freely Moving Wavy Wall
In this work, we present a theoretical and experimental investigation of the fluid–structure interaction between a freely moving wall and an oscillatory flow. Our objective is to elucidate the coupling mechanism between the fluid and the oscillating body that gives rise to reverse streaming, that is, the reversal in the rotation direction of the resulting steady vortices, and to apply this analysis to the case of a freely moving wavy wall. The flow is analyzed theoretically based on a two-dimensional model and an analytical solution is obtained using a perturbation method. Experimental results based on Particle Image Velocimetry are also presented, where an oscillatory flow generated by an electromagnetic force in an electrolyte layer drives a wavy wall floating on the surface. The results confirm the occurrence of reverse streaming and demonstrate that the flow dynamics depend on the density ratio between the freely moving solid and the fluid. The analytical solution qualitatively captures the streaming reversal observed in the experiments.
- Open Access
- 12 December 2025
- Published by MDPI AG in Preprints.org
Reverse Steady Streaming Induced by a Freely Moving Wavy Wall
Recently, Figueroa et al. demonstrated that steady streaming can be generated by the oscillatory motion of a floating magnet driven by electromagnetic forcing in a shallow electrolytic layer. They also found that the rotation direction of the resulting steady vortices is opposite to that of classical streaming flows. In this work, we present a theoretical and experimental investigation of the fluid–structure interaction between a freely moving wall and an oscillatory flow. Our objective is to elucidate the coupling mechanism between the fluid and the oscillating body that gives rise to reverse streaming and to apply this analysis to the case of a freely moving wavy wall. The flow is analyzed theoretically and an analytical solution is obtained using a perturbation method. Experimental results based on Particle Image Velocimetry are also presented, where an oscillatory flow generated by an electromagnetic force in an electrolyte layer drives a wavy wall floating on the surface. The results confirm the occurrence of reverse streaming and demonstrate that the flow dynamics depend on the density ratio between the freely moving solid and the fluid. The analytical solution qualitatively captures the behavior observed in the experiments.
- 12 December 2025
- Published by MDPI AG in Preprints.org
Open AccessReverse Steady Streaming Induced by a Freely Moving Wavy Wall
Recently, Figueroa et al. demonstrated that steady streaming can be generated by the oscillatory motion of a floating magnet driven by electromagnetic forcing in a shallow electrolytic layer. They also found that the rotation direction of the resulting steady vortices is opposite to that of classical streaming flows. In this work, we present a theoretical and experimental investigation of the fluid–structure interaction between a freely moving wall and an oscillatory flow. Our objective is to elucidate the coupling mechanism between the fluid and the oscillating body that gives rise to reverse streaming and to apply this analysis to the case of a freely moving wavy wall. The flow is analyzed theoretically and an analytical solution is obtained using a perturbation method. Experimental results based on Particle Image Velocimetry are also presented, where an oscillatory flow generated by an electromagnetic force in an electrolyte layer drives a wavy wall floating on the surface. The results confirm the occurrence of reverse streaming and demonstrate that the flow dynamics depend on the density ratio between the freely moving solid and the fluid. The analytical solution qualitatively captures the behavior observed in the experiments.
- 16 July 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1015, A25
Electromagnetically driven magnetized spherical Couette flow
The electromagnetically driven magnetised spherical Couette flow is studied experimentally, theoretically and numerically in the laminar regime. The working fluid, Galinstan, is contained in the spherical gap between two concentric spheres at rest. The electromagnetic stirring is primarily generated due to the interaction of a direct current, which is injected through two ring-shaped electrodes located at the equatorial zone of each sphere, and a dipolar magnetic field produced by a permanent magnet located inside the inner sphere. The flows were explored experimentally for a Reynolds number ranging from 450 to 2230 and a Hartmann number of 240. Ultrasound Doppler velocimetry and particle image velocimetry were used to characterise the flow. For low Reynolds numbers, given the symmetry of the problem, a one-dimensional analytic solution is obtained in the equatorial plane from the magnetohydrodynamic equations. The analytical solution reproduces the main characteristics of the flow. In addition, a full three-dimensional numerical model is able to reproduce both the analytical solution and the experimental measurements. To the best knowledge of the authors, this is the first time experimental results of the magnetised spherical Couette flow have been reported with electromagnetic forcing using a liquid metal as the working media.
- 16 July 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1015, A25
Electromagnetically driven magnetized spherical Couette flow
The electromagnetically driven magnetised spherical Couette flow is studied experimentally, theoretically and numerically in the laminar regime. The working fluid, Galinstan, is contained in the spherical gap between two concentric spheres at rest. The electromagnetic stirring is primarily generated due to the interaction of a direct current, which is injected through two ring-shaped electrodes located at the equatorial zone of each sphere, and a dipolar magnetic field produced by a permanent magnet located inside the inner sphere. The flows were explored experimentally for a Reynolds number ranging from 450 to 2230 and a Hartmann number of 240. Ultrasound Doppler velocimetry and particle image velocimetry were used to characterise the flow. For low Reynolds numbers, given the symmetry of the problem, a one-dimensional analytic solution is obtained in the equatorial plane from the magnetohydrodynamic equations. The analytical solution reproduces the main characteristics of the flow. In addition, a full three-dimensional numerical model is able to reproduce both the analytical solution and the experimental measurements. To the best knowledge of the authors, this is the first time experimental results of the magnetised spherical Couette flow have been reported with electromagnetic forcing using a liquid metal as the working media.
- Open Access
- 18 November 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (22) , 10041
MHD Generation for Sustainable Development, from Thermal to Wave Energy Conversion: Review
Magnetohydrodynamic (MHD) generators are direct energy conversion devices that transform the motion of an electrically conducting fluid into electricity through interaction with a magnetic field. Developed as an alternative to conventional turbine-generator systems, MHD generators evolved through the 20th century from large units, which are intended to transform thermal energy into electricity using plasma as a working fluid, to smaller units that can harness heat from a variety of sources. In the last few decades, an effort has been made to develop energy conversion systems that incorporate MHD generators to harvest renewable sources such as solar and ocean energy, strengthening the sustainability of this technology. This review briefly synthesizes the main steps in the evolution of MHD technology for electricity generation, starting by outlining its physical principles and the proposals to convert thermal energy into electricity, either using a high-temperature plasma as a working fluid or a liquid metal in a one- or two-phase flow at lower temperatures. The use of wave energy in the form of acoustic waves, which were obtained from the conversion of thermal energy through thermoacoustic devices coupled to liquid metal and plasma MHD generators, as well as alternatives for the transformation of environmental energy resources employing MHD transducers, is also assessed. Finally, proposals for the conversion of ocean energy, mainly in the form of waves and tides, into electric energy, through MHD generators using either seawater or liquid metal as working fluids, are presented along with some of the challenges of MHD conversion technology.
- 18 November 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (22) , 10041
Open AccessMHD Generation for Sustainable Development, from Thermal to Wave Energy Conversion: Review
Magnetohydrodynamic (MHD) generators are direct energy conversion devices that transform the motion of an electrically conducting fluid into electricity through interaction with a magnetic field. Developed as an alternative to conventional turbine-generator systems, MHD generators evolved through the 20th century from large units, which are intended to transform thermal energy into electricity using plasma as a working fluid, to smaller units that can harness heat from a variety of sources. In the last few decades, an effort has been made to develop energy conversion systems that incorporate MHD generators to harvest renewable sources such as solar and ocean energy, strengthening the sustainability of this technology. This review briefly synthesizes the main steps in the evolution of MHD technology for electricity generation, starting by outlining its physical principles and the proposals to convert thermal energy into electricity, either using a high-temperature plasma as a working fluid or a liquid metal in a one- or two-phase flow at lower temperatures. The use of wave energy in the form of acoustic waves, which were obtained from the conversion of thermal energy through thermoacoustic devices coupled to liquid metal and plasma MHD generators, as well as alternatives for the transformation of environmental energy resources employing MHD transducers, is also assessed. Finally, proposals for the conversion of ocean energy, mainly in the form of waves and tides, into electric energy, through MHD generators using either seawater or liquid metal as working fluids, are presented along with some of the challenges of MHD conversion technology.
- Open Access
- 1 August 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (8)
Interaction of inertia and magnetic force in the liquid metal flow past a magnetic obstacle
In this paper, we present a numerical study of the three-dimensional behavior of a liquid metal flow in an insulating rectangular duct of narrow cross section past a localized magnetic field (i.e., a magnetic obstacle) produced by two parallel square magnets arranged externally on the walls of the duct. A series of simulations are conducted focused mainly on describing the interplay between inertial and magnetic forces in a wide range of interaction parameters (1.8<N<48) by varying the Reynolds number while the Hartmann number is kept fixed (Ha = 75). The analyzed configuration coincides with that studied experimentally by Domínguez et al. [“Experimental and theoretical study of the dynamics of wakes generated by magnetic obstacles,” Magnetohydrodynamics 51(2), 215–224 (2015)] and, as a first step, experimental data from local variables (streamwise velocity component) and global parameters (oscillation frequency and kinetic energy of the wake) are consistently replicated by the numerical model. Furthermore, to complement the flow phenomenology, the transition to different flow structures as the interaction parameter varies is explored. It is found that when the magnetic forces predominate over inertia, stationary vortex patterns with two, four, and six vortices appear while, unlike the hydrodynamic flow past a bluff body, the increase in inertial effects leads to a reduction in the number of vortices and eventually to their disappearance, reaching a state in which the magnetic obstacle becomes imperceptible to the flow. The existence of a critical value of the interaction parameter that maximizes the kinetic energy of the wake is confirmed numerically and corroborated from the experimental data.
- 1 August 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (8)
Open AccessInteraction of inertia and magnetic force in the liquid metal flow past a magnetic obstacle
In this paper, we present a numerical study of the three-dimensional behavior of a liquid metal flow in an insulating rectangular duct of narrow cross section past a localized magnetic field (i.e., a magnetic obstacle) produced by two parallel square magnets arranged externally on the walls of the duct. A series of simulations are conducted focused mainly on describing the interplay between inertial and magnetic forces in a wide range of interaction parameters (1.8<N<48) by varying the Reynolds number while the Hartmann number is kept fixed (Ha = 75). The analyzed configuration coincides with that studied experimentally by Domínguez et al. [“Experimental and theoretical study of the dynamics of wakes generated by magnetic obstacles,” Magnetohydrodynamics 51(2), 215–224 (2015)] and, as a first step, experimental data from local variables (streamwise velocity component) and global parameters (oscillation frequency and kinetic energy of the wake) are consistently replicated by the numerical model. Furthermore, to complement the flow phenomenology, the transition to different flow structures as the interaction parameter varies is explored. It is found that when the magnetic forces predominate over inertia, stationary vortex patterns with two, four, and six vortices appear while, unlike the hydrodynamic flow past a bluff body, the increase in inertial effects leads to a reduction in the number of vortices and eventually to their disappearance, reaching a state in which the magnetic obstacle becomes imperceptible to the flow. The existence of a critical value of the interaction parameter that maximizes the kinetic energy of the wake is confirmed numerically and corroborated from the experimental data.
- 24 April 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 961, A25
Electromagnetically driven anticyclonic rotation in spherical Couette flow
The electromagnetically driven anticyclonic flow in the wide gap of a rotating concentric spheres system is studied experimentally and numerically in the laminar regime. The working fluid is an electrolyte contained in the spherical gap. The outer sphere rotates at constant angular speed, and the inner sphere is at rest. The electromagnetic stirring is generated due to the interaction of a direct current, which is injected radially through ring-shaped electrodes located at the equatorial zone of each sphere, and a dipolar magnetic field produced by a permanent magnet located inside the inner sphere. Experimental velocity fields in the equatorial plane were obtained with particle image velocimetry. Additionally, full three-dimensional numerical simulations were performed. The high shearing at the equatorial region promotes an instability that can be perceived as a triggering mechanism of four tornado-like vortical structures tilted and entangled in the polar direction. The instability structure rotates in either the cyclonic or the anticyclonic direction, depending on the flow parameters, namely, the angular velocity of the outer sphere and the applied electric current. To the best knowledge of the authors, this is the first time the phenomenon under study is reported with electromagnetic forcing. The numerical results agree quantitatively with the experimental observations.
- 24 April 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 961, A25
Electromagnetically driven anticyclonic rotation in spherical Couette flow
The electromagnetically driven anticyclonic flow in the wide gap of a rotating concentric spheres system is studied experimentally and numerically in the laminar regime. The working fluid is an electrolyte contained in the spherical gap. The outer sphere rotates at constant angular speed, and the inner sphere is at rest. The electromagnetic stirring is generated due to the interaction of a direct current, which is injected radially through ring-shaped electrodes located at the equatorial zone of each sphere, and a dipolar magnetic field produced by a permanent magnet located inside the inner sphere. Experimental velocity fields in the equatorial plane were obtained with particle image velocimetry. Additionally, full three-dimensional numerical simulations were performed. The high shearing at the equatorial region promotes an instability that can be perceived as a triggering mechanism of four tornado-like vortical structures tilted and entangled in the polar direction. The instability structure rotates in either the cyclonic or the anticyclonic direction, depending on the flow parameters, namely, the angular velocity of the outer sphere and the applied electric current. To the best knowledge of the authors, this is the first time the phenomenon under study is reported with electromagnetic forcing. The numerical results agree quantitatively with the experimental observations.
- 1 June 2021
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 6 (6) , 064701
Vortex-induced vibration in a cylinder with an azimuthal degree of freedom
We present a numerical study on the motion of a rigid cylinder promoted by its interaction with an incoming flow when the cylinder is restricted to move along the arc of a circle and thus has only one degree of freedom. The analysis also includes the description of the flow around the cylinder, which is influenced by the motion of the cylinder. The Reynolds number, based on the diameter of the cylinder and the far-away incoming flow velocity, is 180. It is considered that the diameter of the circle is three times the diameter of the cylinder and that the ratio of the cylinder to fluid densities is 1.6. The mass and momentum conservation equations in two dimensions are solved in a Cartesian grid, and the presence and motion of the cylinder are resolved using the immersed boundary method. The motion of the cylinder and the flow are two-way coupled in the sense that the aerodynamic forces that drive the displacement of the cylinder result from the fluid-solid interaction, and in turn, the flow around the cylinder is modified by its motion. We analyze the initial transient dynamics and long-time behavior for two different cases. The present results illustrate that the motion of the cylinder and the torque are quasiperiodic with cycles composed of three oscillations with different amplitudes. The stagnation point and the boundary layers are displaced periodically around the rim of the cylinder according to the incoming direction of its relative velocity with respect to the fluid. The upper and lower separation points undergo similar periodic angular displacements. This effect is superposed to the alternating vortex shedding mechanism that occurs in fixed cylinders. Two rows of alternating vortices similar to von Karman vortex street are formed downstream of the cylinder, but their centers are farther apart from the symmetry line than those generated in the wake of a fixed cylinder; this effect is closely related to the coupling between the oscillatory motion of the cylinder and the vortex shedding process. The pressure field and the instantaneous streamlines are also presented and related to the dynamical features of the cylinder motion. It is found that the pressure is the dominant effect on the dynamics of the cylinder and its magnitude and the direction of the total force on the cylinder is related to the motion of the cylinder and the genesis and emission of vortices.
- 1 June 2021
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 6 (6) , 064701
Vortex-induced vibration in a cylinder with an azimuthal degree of freedom
We present a numerical study on the motion of a rigid cylinder promoted by its interaction with an incoming flow when the cylinder is restricted to move along the arc of a circle and thus has only one degree of freedom. The analysis also includes the description of the flow around the cylinder, which is influenced by the motion of the cylinder. The Reynolds number, based on the diameter of the cylinder and the far-away incoming flow velocity, is 180. It is considered that the diameter of the circle is three times the diameter of the cylinder and that the ratio of the cylinder to fluid densities is 1.6. The mass and momentum conservation equations in two dimensions are solved in a Cartesian grid, and the presence and motion of the cylinder are resolved using the immersed boundary method. The motion of the cylinder and the flow are two-way coupled in the sense that the aerodynamic forces that drive the displacement of the cylinder result from the fluid-solid interaction, and in turn, the flow around the cylinder is modified by its motion. We analyze the initial transient dynamics and long-time behavior for two different cases. The present results illustrate that the motion of the cylinder and the torque are quasiperiodic with cycles composed of three oscillations with different amplitudes. The stagnation point and the boundary layers are displaced periodically around the rim of the cylinder according to the incoming direction of its relative velocity with respect to the fluid. The upper and lower separation points undergo similar periodic angular displacements. This effect is superposed to the alternating vortex shedding mechanism that occurs in fixed cylinders. Two rows of alternating vortices similar to von Karman vortex street are formed downstream of the cylinder, but their centers are farther apart from the symmetry line than those generated in the wake of a fixed cylinder; this effect is closely related to the coupling between the oscillatory motion of the cylinder and the vortex shedding process. The pressure field and the instantaneous streamlines are also presented and related to the dynamical features of the cylinder motion. It is found that the pressure is the dominant effect on the dynamics of the cylinder and its magnitude and the direction of the total force on the cylinder is related to the motion of the cylinder and the genesis and emission of vortices.
- Open Access
- 22 April 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (9) , 4641
Laboratory Characterization of a Liquid Metal MHD Generator for Ocean Wave Energy Conversion
Harnessing ocean wave energy is an old challenge that has gained momentum in recent years. In this paper, we present the flow and electrical characterization of a prototype of an alternate liquid metal magnetohydrodynamic (MHD) generator at a laboratory scale which has the potential to make use of the energy of marine waves for its conversion into electrical energy. The eutectic alloy Galinstan, used as a working fluid, was driven in oscillatory motion in a duct of a rectangular cross-section exposed to a transverse magnetic field generated by permanent neodymium magnets. The electric current induced by the motion of the liquid metal in the magnetic field was collected through copper electrodes and delivered to the load. The oscillatory axial velocity component along the duct was measured using ultrasonic Doppler velocimetry for different oscillation frequencies. In turn, the output currents and voltages were measured for different operation conditions and the electric power and efficiency were estimated from experimental measurements. The coupling of this generator to a wave energy converter (WEC) is discussed.
- 22 April 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (9) , 4641
Open AccessLaboratory Characterization of a Liquid Metal MHD Generator for Ocean Wave Energy Conversion
Harnessing ocean wave energy is an old challenge that has gained momentum in recent years. In this paper, we present the flow and electrical characterization of a prototype of an alternate liquid metal magnetohydrodynamic (MHD) generator at a laboratory scale which has the potential to make use of the energy of marine waves for its conversion into electrical energy. The eutectic alloy Galinstan, used as a working fluid, was driven in oscillatory motion in a duct of a rectangular cross-section exposed to a transverse magnetic field generated by permanent neodymium magnets. The electric current induced by the motion of the liquid metal in the magnetic field was collected through copper electrodes and delivered to the load. The oscillatory axial velocity component along the duct was measured using ultrasonic Doppler velocimetry for different oscillation frequencies. In turn, the output currents and voltages were measured for different operation conditions and the electric power and efficiency were estimated from experimental measurements. The coupling of this generator to a wave energy converter (WEC) is discussed.