Mahmoud M. S. Al-Suod
Research Subjects
Research Interests
Mahmoud M. S. Al-Suod has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Abdullah Eial Awwad
Tafila Technical University
2 shared publications Alaa Al-Quteimat
2 shared publicationsOleksandr Ushkarenko
2 shared publications- Irina Zhuk
Department of Automation and Computer-Integrated Technologies, Faculty of Computer Science , Petro Mohyla Black Sea National University , Mykolaiv , street 68 Desantnikov 10 , Ukraine
1 shared publication - Natalia Smetankina
Department of Vibration and Thermostability Studies, Anatolii Pidhornyi Institute of Power Machines and Systems of the National Academy of Sciences of Ukraine, Komunalnykiv Str. 2/10, 61046 Kharkiv, Ukraine
1 shared publication - Nour Hider Almarahlleh
Department of Civil Engineering, Tafila Technical University, Tafila, Jordan
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by EJournal Publishing in International Journal of Electrical and Electronic Engineering & Telecommunications
- Vol. 15 (1)
Determination of the Modern Marine Gas Turbine Rotor Forced Vibration Parameters by Numerical and Experimental Methods
The paper is devoted to the turbomachinery vibration processes investigation. It is based on the hypothesis that such process as forced vibration, high temperature and centrifugal force, constructional damping parameters put the main impact in the gas turbine rotors decrease. For these studies the special refined mathematical model was used. For these model the special space finite elements have been developed, that gives an opportunity to make the approximation of various turbine blades geometry. The model verification has been done by the usage the modern highly automatized experimental equipment that is based on the holographic interferometry method application in real time. The first impeller cooled blades forced vibration parameters have been determined for several most dangerous forced vibration modes, temperatures up to 1000oC and angular velocities of shaft rotation, corresponding with the gas turbine engine normal working regime. Results of calculations data together with the previous studies in the fields of gas turbine engines flow dynamics, heat exchange, stress-strain state can be used in further studies of turbomachinery fracture mechanics area.
- 1 January 2026
- Published by EJournal Publishing in International Journal of Electrical and Electronic Engineering & Telecommunications
- Vol. 15 (1)
Open AccessDetermination of the Modern Marine Gas Turbine Rotor Forced Vibration Parameters by Numerical and Experimental Methods
The paper is devoted to the turbomachinery vibration processes investigation. It is based on the hypothesis that such process as forced vibration, high temperature and centrifugal force, constructional damping parameters put the main impact in the gas turbine rotors decrease. For these studies the special refined mathematical model was used. For these model the special space finite elements have been developed, that gives an opportunity to make the approximation of various turbine blades geometry. The model verification has been done by the usage the modern highly automatized experimental equipment that is based on the holographic interferometry method application in real time. The first impeller cooled blades forced vibration parameters have been determined for several most dangerous forced vibration modes, temperatures up to 1000oC and angular velocities of shaft rotation, corresponding with the gas turbine engine normal working regime. Results of calculations data together with the previous studies in the fields of gas turbine engines flow dynamics, heat exchange, stress-strain state can be used in further studies of turbomachinery fracture mechanics area.
- Open Access
- 1 January 2024
- Published by EJournal Publishing in International Journal of Electrical and Electronic Engineering & Telecommunications
- Vol. 13 (5)
Improving the Control Quality of Gas Diesel Engine as Part of Autonomous Electric Power System
The paper solves the problem of increasing the gas-diesel engines revolutions stablility and, accordingly, the voltage frequency in the network of autonomous electric power systems, which can vary in the range from 45 Hz to 55 Hz. The frequency instability causes fluctuations in active power and has a negative impact on the quality of electricity. The structure of the test bench was developed, which made it possible to get static characteristics and determine the range of active power exchange fluctuations between gasdiesel generators. In this case, the uneven distribution of active power between generators can reach 57%. Based on an analysis of the reasons for the appearance of frequency oscillations and the design features of the gas-diesel unit, its dynamic model has been developed, taking into account the influence of the turbocharger on the appearance of lowfrequency revolutions oscillations. The structure of the control system for a gas-diesel generator set with autotuning of the controller was proposed. Computer simulation of the operation of a gas-diesel generator set was carried out, which made it possible to solve the problem of optimizing the parameters of a gas-diesel engine revolutions Proportional–Integral–Derivative (PID) controller. In this research the method of active experimentation, the theory of probability and statistical data analysis, methods of automatic control theory and computer modeling are used. Using the obtained solution makes it possible to reduce the dispersion of gas-diesel revolutions fluctuations by up to 20%.
- 1 January 2024
- Published by EJournal Publishing in International Journal of Electrical and Electronic Engineering & Telecommunications
- Vol. 13 (5)
Open AccessImproving the Control Quality of Gas Diesel Engine as Part of Autonomous Electric Power System
The paper solves the problem of increasing the gas-diesel engines revolutions stablility and, accordingly, the voltage frequency in the network of autonomous electric power systems, which can vary in the range from 45 Hz to 55 Hz. The frequency instability causes fluctuations in active power and has a negative impact on the quality of electricity. The structure of the test bench was developed, which made it possible to get static characteristics and determine the range of active power exchange fluctuations between gasdiesel generators. In this case, the uneven distribution of active power between generators can reach 57%. Based on an analysis of the reasons for the appearance of frequency oscillations and the design features of the gas-diesel unit, its dynamic model has been developed, taking into account the influence of the turbocharger on the appearance of lowfrequency revolutions oscillations. The structure of the control system for a gas-diesel generator set with autotuning of the controller was proposed. Computer simulation of the operation of a gas-diesel generator set was carried out, which made it possible to solve the problem of optimizing the parameters of a gas-diesel engine revolutions Proportional–Integral–Derivative (PID) controller. In this research the method of active experimentation, the theory of probability and statistical data analysis, methods of automatic control theory and computer modeling are used. Using the obtained solution makes it possible to reduce the dispersion of gas-diesel revolutions fluctuations by up to 20%.
- Open Access
- 28 December 2023
- Published by International Information and Engineering Technology Association in Journal Européen des Systèmes Automatisés
- Vol. 56 (6) , 1043-1051
Software Quality Assessment Technique for the Autonomous Power Plants Automated Control Systems
- 28 December 2023
- Published by International Information and Engineering Technology Association in Journal Européen des Systèmes Automatisés
- Vol. 56 (6) , 1043-1051
Open AccessSoftware Quality Assessment Technique for the Autonomous Power Plants Automated Control Systems
- 31 August 2022
- Published by International Information and Engineering Technology Association in Mathematical Modelling of Engineering Problems
- Vol. 9 (4) , 887-896
Simulation-Based Analysis of Dynamics of Autonomous Electric Power Systems
This paper is devoted to the development of a model of an autonomous electric power system to study random processes of voltage, current and power changes in emergency and dynamic operation modes. A diagram for calculating short-circuit currents has been presented, which was focused on a typical wide range of autonomous power plants with three diesel generator units. A model of an autonomous power plant has been developed, allowing to solve the assignments of determining short-circuit currents and starting currents of electric power machines. The equivalent network of the studied power system for transient calculations has been presented. Thus, the voltage waveforms have been obtained. A comparative assessment of theoretical calculation methods and simulation analysis demonstrated a high degree of accuracy of the simulation results. The use of approach suggested in the article and the developed model allows to increase the accuracy of conclusions when testing the abruptly variable processes and to make the most reasonable choice of measures to improve the quality of electricity and the reliability of electrical equipment. In particular, simulation analysis and obtaining transient curves for starting powerful consumers allow more accurately choose the type of circuit breakers used and the related configuration parameters.
- 31 August 2022
- Published by International Information and Engineering Technology Association in Mathematical Modelling of Engineering Problems
- Vol. 9 (4) , 887-896
Simulation-Based Analysis of Dynamics of Autonomous Electric Power Systems
This paper is devoted to the development of a model of an autonomous electric power system to study random processes of voltage, current and power changes in emergency and dynamic operation modes. A diagram for calculating short-circuit currents has been presented, which was focused on a typical wide range of autonomous power plants with three diesel generator units. A model of an autonomous power plant has been developed, allowing to solve the assignments of determining short-circuit currents and starting currents of electric power machines. The equivalent network of the studied power system for transient calculations has been presented. Thus, the voltage waveforms have been obtained. A comparative assessment of theoretical calculation methods and simulation analysis demonstrated a high degree of accuracy of the simulation results. The use of approach suggested in the article and the developed model allows to increase the accuracy of conclusions when testing the abruptly variable processes and to make the most reasonable choice of measures to improve the quality of electricity and the reliability of electrical equipment. In particular, simulation analysis and obtaining transient curves for starting powerful consumers allow more accurately choose the type of circuit breakers used and the related configuration parameters.