ACAndrea Cuesta-Mosquera

Andrea Cuesta-Mosquera

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Andrea Cuesta-Mosquera has a total of 75 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Indoor Aerosol Characterization on a Shoestring – Recent Insights from the EDIAQI Project

    by Jan-David Förster, Sebastian Düsing, Andrea Cuesta-Mosquera, Ulf Winkler, Goran Gajski, Marko Gerić, Jens Voigtländer, Mira L. Pöhlker

    Poor indoor air quality (IAQ) poses significant health risks to all, as people spend up to 90% of their time indoors, particularly affecting vulnerable groups such as children. Within the EDIAQI (Evidence Driven Air Quality Improvement) project, exposure to indoor air pollution in households with asthmatic children is being investigated through non-invasive, low-cost sensing approaches. To meet these requirements, TROPOS developed the AQBIE (Air Quality Beacon and Immission Evaluator), a compact, robust, and silent monitoring device designed to unobtrusively integrate into children’s bedrooms.In contrast to commercial air quality monitors, AQBIE integrates three distinct particulate matter (PM) sensors, allowing for improved source classification and size differentiation. With a 10-second time resolution, the system provides detailed insights into dynamic indoor pollution events. Active user interaction supports event labeling, adding valuable context to the sensor data.During a three-month field campaign in the city of Zagreb (Croatia), 15 AQBIE units operated continuously across households, covering the transition from late summer to the onset of the heating season. Real-time data transmission via a robust and redundant MQTT-based infrastructure enabled permanent monitoring and remote control without on-site intervention, proving to be highly reliable with data coverage vastly exceeding 99%.AQBIE shows how open-source IoT technologies can serve scientific research while engaging stakeholders and building IAQ awareness in a playful, accessible way. Here we present the device design, data acquisition and data transmission architecture, and preliminary field campaign results. This positions AQBIE as a flexible, low-cost platform for scalable IAQ networks. Ultimately, the collected data will support lung deposition modeling and contribute to the development of health-relevant exposure metrics.This work was supported by the affiliated institutions and the Horizon Europe project EDIAQI, grant ID: 101057497

  • Open Access

    Mobile and Low-Cost Measurement Systems for Indoor and Outdoor Urban Air Quality Characterization

    by Jens Voigtländer, Jan-David Förster, Andrea Cuesta, Sebastian Düsing, Anne Wiesner, Mira Pöhlker

    In a rapidly changing world characterized by increasing urbanization and climate change, urban air quality monitoring is essential for advancing fundamental process understanding, assessing environmental impacts, understanding human exposure to air pollution, and supporting evidence-based mitigation strategies in densely populated areas.The TROPOS Institute has a long-standing track record in developing and applying mobile measurement systems for the comprehensive characterization of aerosol particle properties, including particulate matter (PM), particle number size distributions, and black carbon (BC), which are key indicators of urban air quality. The institute’s expertise spans from hardware design and sensor integration to laboratory-based calibration and long-term quality assurance. Building on these mobile “backpack” platforms and leveraging state-of-the-art low-cost sensor technology, further miniaturized sensor packages have been developed for different indoor and outdoor applications in scientific, as well as engagement and educational projects.These activities represent a continuous and iterative development process, with systems being regularly adapted to emerging scientific needs and technological advances. A major emphasis is placed on the development of scalable data infrastructures aligned with Internet-of-Things (IoT) concepts. This includes the implementation of MQTT-based communication protocols and the integration of SQL-based database solutions for reliable data storage, management, and analysis. As a result, these developments enable real-time data analysis and facilitate deployment in sensor networks as key improvements. The developed instruments are applied across a wide range of interdisciplinary scientific contexts, including local and regional atmospheric studies, large-scale European research projects, but also education and knowledge transfer activities. They support high-resolution, spatiotemporal observations of particulate air quality in diverse urban and indoor environments, providing robust tools for both scientific research and practical applications. As an example, modular low-cost instruments combined with an innovative interactive online platform were successfully applied in the collaborative educational project EngageMINT, in which more than 150 young participants measured air quality parameters and were engaged for environmental topics together with scientists. Furthermore, 15 innovative and very user-friendly devices, named AQBIE (Air Quality Beacon and Immission Evaluator), were developed and applied for several months in a different study exploring indoor air quality to capture seasonal effects of air pollution, mainly the impact of winter biomass burning.

  • Open Access

    Advancements in the incorporation of complex soot morphology within atmospheric sciences

    by Baseerat Romshoo, Thomas Müller, Sascha Pfeifer, Jorge Saturno, Andreas Nowak, Yifan Yang, Ajit Ahlawat, Gazala Habib, Arun S. Babu, Anil Madariya, et al.

    Soot, also commonly known as black carbon (BC) aerosol, is an important short-lived climate forcer. Although global anthropogenic BC emissions from fossil fuel combustion are expected to decrease, BC remains a significant concern in air pollution hotspots in Asia and Africa. Estimates of the global black carbon direct radiative forcing are still subject to considerable uncertainties, ranging from 0.20 to 0.42 Wm⁻². To reduce these uncertainties, it is crucial to improve the representation of the complex soot morphology in simulations of their optical properties and global models. We have investigated various aspects of the optical properties of morphologically complex soot particles, including field and laboratory measurements, and optical simulations of BC as ‘realistic’ fractal aggregates. Investigations conducted in Delhi, a highly polluted urban environment in Asia, confirmed that fractal morphology is important in reducing the overestimation of aerosol light absorption by commonly used light simulation models by 10 to 80%.To address the computationally expensive nature of fractal simulations, we propose a new metric known as the morphology index (MI). Additionally, to reduce the computational burden of optical simulations of fractal BC particles, we developed a fast and accurate machine learning-based tool for predicting the optical properties of BC fractal aggregates. We have highlighted the importance of the lack of representation of complex soot particles in global models, and offer methods to facilitate their integration into the atmospheric science community.

  • Open Access

    Do low-cost public transport tickets affect air pollution? Study case of the 9-euro-ticket in Germany

    by Andrea Cuesta-Mosquera, Lukas Guenthner, Torsten Masson, Karen R.S. Hamann, Friederike Lipken, Sebastian Bamberg, Martin Quaas, Immo Fritsche, Mira Pöhlker

    Low-cost public transport tickets (LCTT) are becoming common offers to promote sustainable transportation, alleviate inflation, and improve public transport (PT) accessibility in urban areas. However, little research is available to quantify and understand the environmental and behavioral effects of the implementation of such tickets. In this comprehensive and interdisciplinary study, we sought to investigate and quantify the impacts of implementing the 9-euro ticket on air quality (AQ) in Leipzig and individual mobility behavior in Germany. The ticket was available during the summer of 2022, allowing commuters to use PT and regional trains at a low cost. The investigation encompassed the evaluation of long-term (measured and weather-normalized) AQ time series from multiple monitoring stations, traffic count data, and anonymized mobility data from the mobile network. In addition, we performed a psychological assessment through surveys to measure behavioral intentions to use PT, collective action intentions to support sustainable mobility, and support for tax-funded LCTT. Overall, we found no evidence of significant impacts on urban AQ at a city level. These results were supported by the psychological assessment that reflected the ticket's polarization effect, leading to no modal shift and, thus, no discernible improvements in traffic-related air pollutant levels. However, we found that the ticket was extensively utilized for long-distance travel in some regions as an apparent increase in demand for transport services, probably as a post-COVID-19 pandemic effect. Our results highlight the complex interplay between transport pricing strategies and their broader environmental and societal impacts.

  • Open Access

    Optical properties and simple forcing efficiency of the organic aerosols and black carbon emitted by residential wood burning in rural central Europe

    by Andrea Cuesta-Mosquera, Kristina Glojek, Griša Močnik, Luka Drinovec, Asta Gregorič, Martin Rigler, Matej Ogrin, Baseerat Romshoo, Kay Weinhold, Maik Merkel, et al.

    Recent years have seen an increase in the use of wood for energy production of over 30 %, and this trend is expected to continue due to the current energy crisis and geopolitical instability. At present, residential wood burning (RWB) is one of the most important sources of organic aerosols (OAs) and black carbon (BC), posing a significant risk to air quality and health. Simultaneously, as a substantial aerosol source, RWB also holds relevance in the context of aerosol radiative effects and climate. While BC is recognized for its large light absorption cross-section, the role of OAs in light absorption is still under evaluation due to their heterogeneous composition and source-dependent optical properties. Existing studies that characterize wood-burning aerosol emissions in Europe primarily concentrate on urban and background sites and focus on BC properties. Despite the significant RWB emissions in rural areas, these locations have received comparatively less attention. The present scenario underscores the imperative for an improved understanding of RWB pollution, aerosol optical properties, and their subsequent connection to climate impacts, particularly in rural areas. We have characterized atmospheric aerosol particles from a central European rural site during wintertime in the village of Retje in Loški Potok, Slovenia, from 1 December 2017 to 7 March 2018. The village experienced extremely high aerosol concentrations produced by RWB and near-ground temperature inversion. The isolated location of the site and the substantial local emissions made it an ideal laboratory-like place for characterizing RWB aerosols with low influence from non-RWB sources under ambient conditions. The mean mass concentrations of OA and BC were 35 µg m−3 (max⁡=270 µg m−3) and 3.1 µg m−3 (max⁡=24 µg m−3), respectively. The mean total particle number concentration (10–600 nm) was 9.9×103 particles cm−3 (max⁡=59×103 particles cm−3). The mean total light absorption coefficients at 370 and 880 nm measured by an AE33 Aethalometer were 120 and 22 Mm−1 and had maximum values of 1100 and 180 Mm−1, respectively. The aerosol concentrations and absorption coefficients measured during the campaign in Loški Potok were significantly larger than reported values for several urban areas in the region with larger populations and a larger extent of aerosol sources. Here, considerable contributions from brown carbon (BrC) to the total light absorption were identified, reaching up to 60 % and 48 % in the near-UV (370 nm) and blue (470 nm) wavelengths. These contributions are up to 3 times higher than values reported for other sites impacted by wood-burning emissions. The calculated mass absorption cross-section and the absorption Ångström exponent for RWB OA were MACOA,370nm=2.4 m2 g−1, and AAEBrC,370-590nm=3.9 , respectively. Simple-forcing-efficiency (SFE) calculations were performed as a sensitivity analysis to evaluate the climate impact of the RWB aerosols produced at the study site by integrating the optical properties measured during the campaign. The SFE results show a considerable forcing capacity from the local RWB aerosols, with a high sensitivity to OA absorption properties and a more substantial impact over bright surfaces like snow, typical during the coldest season with higher OA emissions from RWB. Our study's results are highly significant regarding air pollution, optical properties, and climate impact. The findings suggest that there may be an underestimation of RWB emissions in rural Europe and that further investigation is necessary.


  • Open Access

    Reply on RC2

    by Andrea Cuesta-Mosquera, Kristina Glojek, Griša Močnik, Luka Drinovec, Asta Gregorič, Martin Rigler, Matej Ogrin, Baseerat Romshoo, Kay Weinhold, Maik Merkel, et al.

    Recent years have seen an increase in the use of wood for energy production of over 30 %, and this trend is expected to continue due to the current energy crisis and geopolitical instability. At present, residential wood burning (RWB) is one of the most important sources of organic aerosols (OA) and black carbon (BC). While BC is recognized for its large light absorption cross-section, the role of OA in light absorption is still under evaluation due to their heterogeneous composition and source-dependent optical properties. Studies that characterize wood-burning aerosol emissions in Europe typically focus on urban and background sites and only cover BC properties. However, RWB is more prevalent in rural areas, and the present scenario indicates that an improved understanding of the RWB aerosol optical properties and their subsequent connection to climate impacts is necessary for rural areas. We have characterized atmospheric aerosol particles from a central European rural site during wintertime in the village of Retje in Loški Potok, Slovenia, from 01.12.2017 to 07.03.2018. The village experienced extremely high aerosol concentrations produced by RWB and near-ground temperature inversion. The isolated location of the site and the substantial local emissions made it an ideal laboratory-like place for characterizing RWB aerosols with low influence from non-RWB sources under ambient conditions. The mean mass concentrations of OA and BC were 34.8 µg m-3 (max = 271.8 µg m-3) and 3.1 µg m-3 (max = 24.3 µg m-3), respectively. The mean total particle number concentration (10–600 nm) was 9.9 x 103 particles cm-3 (max = 53.5 x 103 particles cm-3). The mean total light absorption coefficient at 370 nm and 880 nm measured by an Aethalometer AE33 were 122.8 Mm-1 and 15.3 Mm-1 and had maximum values of 1103.9 Mm-1 and 179.1 Mm-1, respectively. The aerosol concentrations and absorption coefficients measured during the campaign in Loški Potok were significantly larger than those reported values for several urban areas in the region with larger populations and extent of aerosol sources. Here, considerable contributions from brown carbon (BrC) to the total light absorption were identified, reaching up to 60 % and 48 % in the near UV (370 nm) and blue (470 nm) wavelengths. These contributions are up to three times higher than values reported for other sites impacted by wood-burning emissions. The calculated mass absorption cross-section and the absorption Ångström exponent for RWB OA were MACOA, 370 nm= 2.4 m2 g-1, and AAEBrC, 370–590 nm= 3.9, respectively. Simple forcing efficiency (SFE) calculations were performed as a sensitivity analysis to evaluate the climate impact of the RWB aerosols produced at the study site by integrating the optical properties measured during the campaign. The SFE results show a considerable forcing capacity from the local RWB aerosols, with a high sensitivity to OA absorption properties and a more substantial impact over bright surfaces like snow, typical during the coldest season with higher OA emissions from RWB. Our study's results are highly significant regarding air pollution, optical properties, and climate impact. The findings suggest that there may be an underestimation of RWB emissions in rural Europe and that further investigation is necessary.

  • Open Access

    Reply on RC1

    by Andrea Cuesta-Mosquera, Kristina Glojek, Griša Močnik, Luka Drinovec, Asta Gregorič, Martin Rigler, Matej Ogrin, Baseerat Romshoo, Kay Weinhold, Maik Merkel, et al.

    Recent years have seen an increase in the use of wood for energy production of over 30 %, and this trend is expected to continue due to the current energy crisis and geopolitical instability. At present, residential wood burning (RWB) is one of the most important sources of organic aerosols (OA) and black carbon (BC). While BC is recognized for its large light absorption cross-section, the role of OA in light absorption is still under evaluation due to their heterogeneous composition and source-dependent optical properties. Studies that characterize wood-burning aerosol emissions in Europe typically focus on urban and background sites and only cover BC properties. However, RWB is more prevalent in rural areas, and the present scenario indicates that an improved understanding of the RWB aerosol optical properties and their subsequent connection to climate impacts is necessary for rural areas. We have characterized atmospheric aerosol particles from a central European rural site during wintertime in the village of Retje in Loški Potok, Slovenia, from 01.12.2017 to 07.03.2018. The village experienced extremely high aerosol concentrations produced by RWB and near-ground temperature inversion. The isolated location of the site and the substantial local emissions made it an ideal laboratory-like place for characterizing RWB aerosols with low influence from non-RWB sources under ambient conditions. The mean mass concentrations of OA and BC were 34.8 µg m-3 (max = 271.8 µg m-3) and 3.1 µg m-3 (max = 24.3 µg m-3), respectively. The mean total particle number concentration (10–600 nm) was 9.9 x 103 particles cm-3 (max = 53.5 x 103 particles cm-3). The mean total light absorption coefficient at 370 nm and 880 nm measured by an Aethalometer AE33 were 122.8 Mm-1 and 15.3 Mm-1 and had maximum values of 1103.9 Mm-1 and 179.1 Mm-1, respectively. The aerosol concentrations and absorption coefficients measured during the campaign in Loški Potok were significantly larger than those reported values for several urban areas in the region with larger populations and extent of aerosol sources. Here, considerable contributions from brown carbon (BrC) to the total light absorption were identified, reaching up to 60 % and 48 % in the near UV (370 nm) and blue (470 nm) wavelengths. These contributions are up to three times higher than values reported for other sites impacted by wood-burning emissions. The calculated mass absorption cross-section and the absorption Ångström exponent for RWB OA were MACOA, 370 nm= 2.4 m2 g-1, and AAEBrC, 370–590 nm= 3.9, respectively. Simple forcing efficiency (SFE) calculations were performed as a sensitivity analysis to evaluate the climate impact of the RWB aerosols produced at the study site by integrating the optical properties measured during the campaign. The SFE results show a considerable forcing capacity from the local RWB aerosols, with a high sensitivity to OA absorption properties and a more substantial impact over bright surfaces like snow, typical during the coldest season with higher OA emissions from RWB. Our study's results are highly significant regarding air pollution, optical properties, and climate impact. The findings suggest that there may be an underestimation of RWB emissions in rural Europe and that further investigation is necessary.

  • Open Access

    Reply on RC3

    by Andrea Cuesta-Mosquera, Kristina Glojek, Griša Močnik, Luka Drinovec, Asta Gregorič, Martin Rigler, Matej Ogrin, Baseerat Romshoo, Kay Weinhold, Maik Merkel, et al.

    Recent years have seen an increase in the use of wood for energy production of over 30 %, and this trend is expected to continue due to the current energy crisis and geopolitical instability. At present, residential wood burning (RWB) is one of the most important sources of organic aerosols (OA) and black carbon (BC). While BC is recognized for its large light absorption cross-section, the role of OA in light absorption is still under evaluation due to their heterogeneous composition and source-dependent optical properties. Studies that characterize wood-burning aerosol emissions in Europe typically focus on urban and background sites and only cover BC properties. However, RWB is more prevalent in rural areas, and the present scenario indicates that an improved understanding of the RWB aerosol optical properties and their subsequent connection to climate impacts is necessary for rural areas. We have characterized atmospheric aerosol particles from a central European rural site during wintertime in the village of Retje in Loški Potok, Slovenia, from 01.12.2017 to 07.03.2018. The village experienced extremely high aerosol concentrations produced by RWB and near-ground temperature inversion. The isolated location of the site and the substantial local emissions made it an ideal laboratory-like place for characterizing RWB aerosols with low influence from non-RWB sources under ambient conditions. The mean mass concentrations of OA and BC were 34.8 µg m-3 (max = 271.8 µg m-3) and 3.1 µg m-3 (max = 24.3 µg m-3), respectively. The mean total particle number concentration (10–600 nm) was 9.9 x 103 particles cm-3 (max = 53.5 x 103 particles cm-3). The mean total light absorption coefficient at 370 nm and 880 nm measured by an Aethalometer AE33 were 122.8 Mm-1 and 15.3 Mm-1 and had maximum values of 1103.9 Mm-1 and 179.1 Mm-1, respectively. The aerosol concentrations and absorption coefficients measured during the campaign in Loški Potok were significantly larger than those reported values for several urban areas in the region with larger populations and extent of aerosol sources. Here, considerable contributions from brown carbon (BrC) to the total light absorption were identified, reaching up to 60 % and 48 % in the near UV (370 nm) and blue (470 nm) wavelengths. These contributions are up to three times higher than values reported for other sites impacted by wood-burning emissions. The calculated mass absorption cross-section and the absorption Ångström exponent for RWB OA were MACOA, 370 nm= 2.4 m2 g-1, and AAEBrC, 370–590 nm= 3.9, respectively. Simple forcing efficiency (SFE) calculations were performed as a sensitivity analysis to evaluate the climate impact of the RWB aerosols produced at the study site by integrating the optical properties measured during the campaign. The SFE results show a considerable forcing capacity from the local RWB aerosols, with a high sensitivity to OA absorption properties and a more substantial impact over bright surfaces like snow, typical during the coldest season with higher OA emissions from RWB. Our study's results are highly significant regarding air pollution, optical properties, and climate impact. The findings suggest that there may be an underestimation of RWB emissions in rural Europe and that further investigation is necessary.

  • Open Access

    Comment on egusphere-2023-1874

    by Andrea Cuesta-Mosquera, Kristina Glojek, Griša Močnik, Luka Drinovec, Asta Gregorič, Martin Rigler, Matej Ogrin, Baseerat Romshoo, Kay Weinhold, Maik Merkel, et al.

    Recent years have seen an increase in the use of wood for energy production of over 30 %, and this trend is expected to continue due to the current energy crisis and geopolitical instability. At present, residential wood burning (RWB) is one of the most important sources of organic aerosols (OA) and black carbon (BC). While BC is recognized for its large light absorption cross-section, the role of OA in light absorption is still under evaluation due to their heterogeneous composition and source-dependent optical properties. Studies that characterize wood-burning aerosol emissions in Europe typically focus on urban and background sites and only cover BC properties. However, RWB is more prevalent in rural areas, and the present scenario indicates that an improved understanding of the RWB aerosol optical properties and their subsequent connection to climate impacts is necessary for rural areas. We have characterized atmospheric aerosol particles from a central European rural site during wintertime in the village of Retje in Loški Potok, Slovenia, from 01.12.2017 to 07.03.2018. The village experienced extremely high aerosol concentrations produced by RWB and near-ground temperature inversion. The isolated location of the site and the substantial local emissions made it an ideal laboratory-like place for characterizing RWB aerosols with low influence from non-RWB sources under ambient conditions. The mean mass concentrations of OA and BC were 34.8 µg m-3 (max = 271.8 µg m-3) and 3.1 µg m-3 (max = 24.3 µg m-3), respectively. The mean total particle number concentration (10–600 nm) was 9.9 x 103 particles cm-3 (max = 53.5 x 103 particles cm-3). The mean total light absorption coefficient at 370 nm and 880 nm measured by an Aethalometer AE33 were 122.8 Mm-1 and 15.3 Mm-1 and had maximum values of 1103.9 Mm-1 and 179.1 Mm-1, respectively. The aerosol concentrations and absorption coefficients measured during the campaign in Loški Potok were significantly larger than those reported values for several urban areas in the region with larger populations and extent of aerosol sources. Here, considerable contributions from brown carbon (BrC) to the total light absorption were identified, reaching up to 60 % and 48 % in the near UV (370 nm) and blue (470 nm) wavelengths. These contributions are up to three times higher than values reported for other sites impacted by wood-burning emissions. The calculated mass absorption cross-section and the absorption Ångström exponent for RWB OA were MACOA, 370 nm= 2.4 m2 g-1, and AAEBrC, 370–590 nm= 3.9, respectively. Simple forcing efficiency (SFE) calculations were performed as a sensitivity analysis to evaluate the climate impact of the RWB aerosols produced at the study site by integrating the optical properties measured during the campaign. The SFE results show a considerable forcing capacity from the local RWB aerosols, with a high sensitivity to OA absorption properties and a more substantial impact over bright surfaces like snow, typical during the coldest season with higher OA emissions from RWB. Our study's results are highly significant regarding air pollution, optical properties, and climate impact. The findings suggest that there may be an underestimation of RWB emissions in rural Europe and that further investigation is necessary.

  • Open Access

    Comment on egusphere-2023-1874

    by Andrea Cuesta-Mosquera, Kristina Glojek, Griša Močnik, Luka Drinovec, Asta Gregorič, Martin Rigler, Matej Ogrin, Baseerat Romshoo, Kay Weinhold, Maik Merkel, et al.

    Recent years have seen an increase in the use of wood for energy production of over 30 %, and this trend is expected to continue due to the current energy crisis and geopolitical instability. At present, residential wood burning (RWB) is one of the most important sources of organic aerosols (OA) and black carbon (BC). While BC is recognized for its large light absorption cross-section, the role of OA in light absorption is still under evaluation due to their heterogeneous composition and source-dependent optical properties. Studies that characterize wood-burning aerosol emissions in Europe typically focus on urban and background sites and only cover BC properties. However, RWB is more prevalent in rural areas, and the present scenario indicates that an improved understanding of the RWB aerosol optical properties and their subsequent connection to climate impacts is necessary for rural areas. We have characterized atmospheric aerosol particles from a central European rural site during wintertime in the village of Retje in Loški Potok, Slovenia, from 01.12.2017 to 07.03.2018. The village experienced extremely high aerosol concentrations produced by RWB and near-ground temperature inversion. The isolated location of the site and the substantial local emissions made it an ideal laboratory-like place for characterizing RWB aerosols with low influence from non-RWB sources under ambient conditions. The mean mass concentrations of OA and BC were 34.8 µg m-3 (max = 271.8 µg m-3) and 3.1 µg m-3 (max = 24.3 µg m-3), respectively. The mean total particle number concentration (10–600 nm) was 9.9 x 103 particles cm-3 (max = 53.5 x 103 particles cm-3). The mean total light absorption coefficient at 370 nm and 880 nm measured by an Aethalometer AE33 were 122.8 Mm-1 and 15.3 Mm-1 and had maximum values of 1103.9 Mm-1 and 179.1 Mm-1, respectively. The aerosol concentrations and absorption coefficients measured during the campaign in Loški Potok were significantly larger than those reported values for several urban areas in the region with larger populations and extent of aerosol sources. Here, considerable contributions from brown carbon (BrC) to the total light absorption were identified, reaching up to 60 % and 48 % in the near UV (370 nm) and blue (470 nm) wavelengths. These contributions are up to three times higher than values reported for other sites impacted by wood-burning emissions. The calculated mass absorption cross-section and the absorption Ångström exponent for RWB OA were MACOA, 370 nm= 2.4 m2 g-1, and AAEBrC, 370–590 nm= 3.9, respectively. Simple forcing efficiency (SFE) calculations were performed as a sensitivity analysis to evaluate the climate impact of the RWB aerosols produced at the study site by integrating the optical properties measured during the campaign. The SFE results show a considerable forcing capacity from the local RWB aerosols, with a high sensitivity to OA absorption properties and a more substantial impact over bright surfaces like snow, typical during the coldest season with higher OA emissions from RWB. Our study's results are highly significant regarding air pollution, optical properties, and climate impact. The findings suggest that there may be an underestimation of RWB emissions in rural Europe and that further investigation is necessary.