Wei Xing Cai
Research Subjects
Wei Xing Cai has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Jia Geng He
State Key Laboratory of ISN, Xidian University, Xian, China
1 shared publication - Jianjun Zhao
State Key Laboratory of Geohazard Prevention and Geoenvironment Protection, Chengdu University of Technology, Chengdu, China
1 shared publication - Jie Zhang
Department of Mechanical Engineering and the Department of Electrical and Computer Engineering, The University of Texas at Dallas, Richardson, TX, USA
1 shared publication Jingyong Wang
Zhejiang Huadong Construction Engineering Co., Ltd., Hangzhou, 310010, China
1 shared publicationLinyang Li
College of Geosciences and Engineering, North China University of Water Resources and Electric Power, Zhengzhou, 450045, China
1 shared publicationMengming Lin
State Key Laboratory of Geohazard Prevention and Geoenvironment Protection, Chengdu University of Technology, Chengdu, 610059, China
1 shared publication
Latest Publications
- Open Access
- 1 June 2024
- Published by KEAI Publishing in Natural Hazards Research
- Vol. 4 (2) , 255-264
Prediction of surface deformation induced by mining thin coal seam: A case study of Guanshan coalfield in Sichuan
The problem of surface deformation caused by coal mining is acute and usually lasts for a long time. During coal mining, the movement of the overlying strata has a broad range of influences, which may cause surface deformation, surface cracking, and damage to structures (buildings). However, continuous deformation monitoring data are often scarce in practice, making it challenging to predict the surface deformation caused by coal mining. In this context, this paper takes Sichuan’s Guanshan coalfield as the research object and proposes a comprehensive method integrating interferometric synthetic aperture radar (InSAR) technology, the FLAC3D finite difference software, and the probability integral method to predict the surface deformation caused by mining a thin seam of coal. The results show that the trend of surface deformation estimated by the numerical simulation agrees well with the results of InSAR data and the probability integral model when using InSAR historical deformation data to invert the parameters of rock mechanics in the numerical simulation, which is beneficial to improving the reliability of the simulation results. The calculations of the probability integral method are close to the predictions of the FLAC3D numerical simulation, and a settlement deformation of 0.68 m is expected to occur in the Guanshan coalfield area. The comprehensive prediction method proposed in this paper effectively enhances the accuracy of surface deformation prediction under the action of mining and can provide a reference for predicting the surface subsidence of similar coal mines.
- 1 June 2024
- Published by KEAI Publishing in Natural Hazards Research
- Vol. 4 (2) , 255-264
Open AccessPrediction of surface deformation induced by mining thin coal seam: A case study of Guanshan coalfield in Sichuan
The problem of surface deformation caused by coal mining is acute and usually lasts for a long time. During coal mining, the movement of the overlying strata has a broad range of influences, which may cause surface deformation, surface cracking, and damage to structures (buildings). However, continuous deformation monitoring data are often scarce in practice, making it challenging to predict the surface deformation caused by coal mining. In this context, this paper takes Sichuan’s Guanshan coalfield as the research object and proposes a comprehensive method integrating interferometric synthetic aperture radar (InSAR) technology, the FLAC3D finite difference software, and the probability integral method to predict the surface deformation caused by mining a thin seam of coal. The results show that the trend of surface deformation estimated by the numerical simulation agrees well with the results of InSAR data and the probability integral model when using InSAR historical deformation data to invert the parameters of rock mechanics in the numerical simulation, which is beneficial to improving the reliability of the simulation results. The calculations of the probability integral method are close to the predictions of the FLAC3D numerical simulation, and a settlement deformation of 0.68 m is expected to occur in the Guanshan coalfield area. The comprehensive prediction method proposed in this paper effectively enhances the accuracy of surface deformation prediction under the action of mining and can provide a reference for predicting the surface subsidence of similar coal mines.
- 1 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (10) , 7741-7751
Low-Profile Wideband Dual-Polarized Antenna for Millimeter-Wave Beam Steering Applications
In this work, a dual-polarized endfire phased antenna array with a low-profile is proposed for millimeter-wave (mmW) beam steering application. The proposed antenna array is constructed by a 1×5 subarray with vertical polarization (V-pol) realized by novel SIW horn antenna and a 1×4 subarray with horizontal polarization (H-pol) realized by quasi-Yagi antenna. Characteristic mode theory (CMT) is employed to guide the wideband design for both V-pol and H-pol elements in the dual-polarized framework. A wide impedance bandwidth for V-pol radiation is 24.6~29.8GHz while that for H-pol radiation is 23.37~35.47GHz. By integrating both subarrays, an overlapping bandwidth from 24.5GHz to 30GHz is realized within a total profile of 0.15 λ 0 , in addition, high isolation of -20dB is achieved among most operation band for each element. Furthermore, the maximum realized gain for V-pol radiation and H-pol radiation are 11.4dBi and 11.6dBi, respectively. Meanwhile, a wide beam scanning range of -45°~42° for V-pol radiation and -45°~39° for H-pol radiation with realized gain over 7dBi is realized. In virtue of low-profile, wide bandwidth, easy integration, high isolation, and high gain, the proposed antenna array provides a promising candidate for future millimeter-wave vehicular applications.
- 1 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (10) , 7741-7751
Low-Profile Wideband Dual-Polarized Antenna for Millimeter-Wave Beam Steering Applications
In this work, a dual-polarized endfire phased antenna array with a low-profile is proposed for millimeter-wave (mmW) beam steering application. The proposed antenna array is constructed by a 1×5 subarray with vertical polarization (V-pol) realized by novel SIW horn antenna and a 1×4 subarray with horizontal polarization (H-pol) realized by quasi-Yagi antenna. Characteristic mode theory (CMT) is employed to guide the wideband design for both V-pol and H-pol elements in the dual-polarized framework. A wide impedance bandwidth for V-pol radiation is 24.6~29.8GHz while that for H-pol radiation is 23.37~35.47GHz. By integrating both subarrays, an overlapping bandwidth from 24.5GHz to 30GHz is realized within a total profile of 0.15 λ 0 , in addition, high isolation of -20dB is achieved among most operation band for each element. Furthermore, the maximum realized gain for V-pol radiation and H-pol radiation are 11.4dBi and 11.6dBi, respectively. Meanwhile, a wide beam scanning range of -45°~42° for V-pol radiation and -45°~39° for H-pol radiation with realized gain over 7dBi is realized. In virtue of low-profile, wide bandwidth, easy integration, high isolation, and high gain, the proposed antenna array provides a promising candidate for future millimeter-wave vehicular applications.