Valentyn Kozechko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Valentyn Kozechko has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Dmytro Laukhin
Dnipro University of Technology
3 shared publications - Oleksandr Beketov
Український державний університет науки і технологій, Україна
3 shared publications - Viktoriia Kozechko
Department of Civil Engineering, Faculty of Civil Engineering, Czestochowa University of Technology, 42-201 Czestochowa, Poland
2 shared publications - D. I. Mamchur
Ukrainian State University of Science and Technologies
1 shared publication - Ievgen Babeshko
Національний аерокосмічний університет «Харківський авіаційний інститут
1 shared publication - Inna Shelkovska
Kremenchuk Mykhailo Ostrohradskyi National University
1 shared publication
Latest Publications
- 30 May 2026
- Published by Institute of Ferrous Metallurgy Z.I. Nekrasova of the National Academy of Sciences of Ukraine in Fundamental and applied problems of ferrous metallurgy
- No. 40,p. 110-121
Quantitative analysis of the interrelationship between the thickness of rolled metal products and the complex of mechanical properties of 10G2FB steel
The main engineering task in the design of welded building structures, including those of critical purpose, is to calculate the relationship between the stress-strain state that arises under the influence of external loading and the kinetics of fracture initiation and propagation. The current regulatory design documentation does not take into account the structural state of the material, which has a direct impact on both the formation of the stress-strain state (a complex of mechanical properties) and, as a result, on the processes of fracture initiation. This work is devoted to the study of the quantitative relationship between the complex of mechanical properties of 10G2FB steel and the corresponding structural state, taking into account the thickness of the rolled metal. The work analyzes the relationship between the structural state that is formed in low-carbon low-alloy steel 10G2FB and the indicators of mechanical properties, namely: yield strength, tensile strength, relative elongation, relative elongation. The performed complex of metallographic studies showed that for all studied thicknesses the structure of the steel is a ferrite-pearlite conglomerate. Using the mathematical apparatus of one-dimensional regression analysis, the corresponding mathematical models were constructed, the adequacy of which was proven by using the quasi-Newton method of residues. Analysis of the obtained data showed that with an increase in the thickness of the rolled metal, a decrease in the yield strength is observed with a simultaneous increase in the strength limit. This fact is explained by changes in the structural state of the material, namely, an increase in the percentage content and size of the pearlite component. The dependence of the plastic properties (relative elongation, relative elongation) on the thickness of the rolled metal is also explained by a simultaneous increase in the percentage content of pearlite with a decrease in the amount of the ferrite component.
- 30 May 2026
- Published by Institute of Ferrous Metallurgy Z.I. Nekrasova of the National Academy of Sciences of Ukraine in Fundamental and applied problems of ferrous metallurgy
- No. 40,p. 110-121
Quantitative analysis of the interrelationship between the thickness of rolled metal products and the complex of mechanical properties of 10G2FB steel
The main engineering task in the design of welded building structures, including those of critical purpose, is to calculate the relationship between the stress-strain state that arises under the influence of external loading and the kinetics of fracture initiation and propagation. The current regulatory design documentation does not take into account the structural state of the material, which has a direct impact on both the formation of the stress-strain state (a complex of mechanical properties) and, as a result, on the processes of fracture initiation. This work is devoted to the study of the quantitative relationship between the complex of mechanical properties of 10G2FB steel and the corresponding structural state, taking into account the thickness of the rolled metal. The work analyzes the relationship between the structural state that is formed in low-carbon low-alloy steel 10G2FB and the indicators of mechanical properties, namely: yield strength, tensile strength, relative elongation, relative elongation. The performed complex of metallographic studies showed that for all studied thicknesses the structure of the steel is a ferrite-pearlite conglomerate. Using the mathematical apparatus of one-dimensional regression analysis, the corresponding mathematical models were constructed, the adequacy of which was proven by using the quasi-Newton method of residues. Analysis of the obtained data showed that with an increase in the thickness of the rolled metal, a decrease in the yield strength is observed with a simultaneous increase in the strength limit. This fact is explained by changes in the structural state of the material, namely, an increase in the percentage content and size of the pearlite component. The dependence of the plastic properties (relative elongation, relative elongation) on the thickness of the rolled metal is also explained by a simultaneous increase in the percentage content of pearlite with a decrease in the amount of the ferrite component.
- Open Access
- 7 May 2026
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry
- No. 2(12),p. 40-49
USE OF 3D PRINTING TECHNOLOGIES IN THE DESIGN OF SOIL TILLAGE EQUIPMENT
The article considers the possibilities of applying additive technologies in the process of designing and improving soil tillage equipment using the example of a promising forest cultivator intended for operation under conditions of ungrubbed clear-cut areas. A classification of 3D printing equipment by accessibility level and functional purpose is presented, covering consumer, personal, professional, and industrial classes. A comparative analysis of modern 3D printing systems in terms of cost is carried out with reference to the European market conditions. It is shown that personal 3D printers, in terms of their technical characteristics and economic indicators, represent a feasible alternative to expensive professional systems for use in educational and research institutions.Within the framework of the study, a three-dimensional solid model of a forest cultivator was developed in the SolidWorks CAD environment and prepared for additive manufacturing using the Simplify3D software. The sequence of technological operations is described, including part orientation within the printer’s build volume, scaling, print parameter setup, support generation, and G-code creation. An approach to dividing the original digital model into separate functional units is proposed, taking into account the limitations of the printer’s build chamber, the mating features of elements, and the need to ensure the mobility of the main assemblies of the scale model.As a result, a scaled cultivator model at a 1:20 scale was additively manufactured using extrusion-based printing technology. The obtained mock-up reproduces the structural design, spatial layout, and mutual arrangement of the main machine components while maintaining the mobility of the working tool sections, suspension elements, and safety mechanisms. It is shown that the presence of functional movable joints makes it possible to simulate real working motions of the implement, analyze its kinematics, the trajectories of working tool movements, the interaction between individual units, and assess the influence of different layout configurations on the functional parameters of the design. Special attention is paid to the analysis of two main cultivator layout variants intended for continuous inter-row tillage of forest plantations and for row-straddling maintenance operations. Their design features, parameters of working tool section placement, and widths of the processed strips are presented, and the versatility of the proposed modular scheme is substantiated. The results of simulation studies indicate the cultivator’s ability to reliably overcome obstacles in the form of stumps up to 38 cm high at a tillage depth of 12 cm, which confirms the feasibility of using such a design under conditions of ungrubbed clear-cut areas.It is shown that the application of 3D mock-up prototyping at early design stages makes it possible to identify design shortcomings and irrational layout solutions before manufacturing a full-scale prototype, significantly reducing time and material costs for further refinement of the design. The possibility of using the scaled physical model not only as a demonstration tool but also as a functional experimental test bench for verifying simulation results, refining the parameters of mathematical and kinematic models, and increasing the reliability of performance prediction for the cultivator is substantiated.The educational and motivational potential of additive technologies is also highlighted, as they enable the integration of modern CAD/CAM solutions into the educational process, enhance the visual clarity of engineering disciplines, and involve students in active research and inventive activities. Overall, the results of the study confirm the prospects of using 3D printing technologies as a tool for visualization, engineering analysis, and optimization of design solutions in the field of soil tillage equipment design, particularly for forestry machinery intended for application within environmentally friendly and resource-saving technologies.
- 7 May 2026
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry
- No. 2(12),p. 40-49
Open AccessUSE OF 3D PRINTING TECHNOLOGIES IN THE DESIGN OF SOIL TILLAGE EQUIPMENT
The article considers the possibilities of applying additive technologies in the process of designing and improving soil tillage equipment using the example of a promising forest cultivator intended for operation under conditions of ungrubbed clear-cut areas. A classification of 3D printing equipment by accessibility level and functional purpose is presented, covering consumer, personal, professional, and industrial classes. A comparative analysis of modern 3D printing systems in terms of cost is carried out with reference to the European market conditions. It is shown that personal 3D printers, in terms of their technical characteristics and economic indicators, represent a feasible alternative to expensive professional systems for use in educational and research institutions.Within the framework of the study, a three-dimensional solid model of a forest cultivator was developed in the SolidWorks CAD environment and prepared for additive manufacturing using the Simplify3D software. The sequence of technological operations is described, including part orientation within the printer’s build volume, scaling, print parameter setup, support generation, and G-code creation. An approach to dividing the original digital model into separate functional units is proposed, taking into account the limitations of the printer’s build chamber, the mating features of elements, and the need to ensure the mobility of the main assemblies of the scale model.As a result, a scaled cultivator model at a 1:20 scale was additively manufactured using extrusion-based printing technology. The obtained mock-up reproduces the structural design, spatial layout, and mutual arrangement of the main machine components while maintaining the mobility of the working tool sections, suspension elements, and safety mechanisms. It is shown that the presence of functional movable joints makes it possible to simulate real working motions of the implement, analyze its kinematics, the trajectories of working tool movements, the interaction between individual units, and assess the influence of different layout configurations on the functional parameters of the design. Special attention is paid to the analysis of two main cultivator layout variants intended for continuous inter-row tillage of forest plantations and for row-straddling maintenance operations. Their design features, parameters of working tool section placement, and widths of the processed strips are presented, and the versatility of the proposed modular scheme is substantiated. The results of simulation studies indicate the cultivator’s ability to reliably overcome obstacles in the form of stumps up to 38 cm high at a tillage depth of 12 cm, which confirms the feasibility of using such a design under conditions of ungrubbed clear-cut areas.It is shown that the application of 3D mock-up prototyping at early design stages makes it possible to identify design shortcomings and irrational layout solutions before manufacturing a full-scale prototype, significantly reducing time and material costs for further refinement of the design. The possibility of using the scaled physical model not only as a demonstration tool but also as a functional experimental test bench for verifying simulation results, refining the parameters of mathematical and kinematic models, and increasing the reliability of performance prediction for the cultivator is substantiated.The educational and motivational potential of additive technologies is also highlighted, as they enable the integration of modern CAD/CAM solutions into the educational process, enhance the visual clarity of engineering disciplines, and involve students in active research and inventive activities. Overall, the results of the study confirm the prospects of using 3D printing technologies as a tool for visualization, engineering analysis, and optimization of design solutions in the field of soil tillage equipment design, particularly for forestry machinery intended for application within environmentally friendly and resource-saving technologies.
- 3 April 2025
- Published by DKS Center in Журнал "Агросвіт"
- No. 7,p. 98-104
АНАЛІЗ ЕФЕКТИВНОСТІ ВИРОЩУВАННЯ СОНЯШНИКУ В СУЧАСНИХ УМОВАХ
- 3 April 2025
- Published by DKS Center in Журнал "Агросвіт"
- No. 7,p. 98-104
АНАЛІЗ ЕФЕКТИВНОСТІ ВИРОЩУВАННЯ СОНЯШНИКУ В СУЧАСНИХ УМОВАХ
- 1 January 2025
- Published by Springer Nature
- p. 149-155
Mathematical Modeling of Microstructure Evolution in the Process of Hot Rolling of Strips and Sheets
- 1 January 2025
- Published by Springer Nature
- p. 149-155
Mathematical Modeling of Microstructure Evolution in the Process of Hot Rolling of Strips and Sheets
- Open Access
- 14 December 2023
- Published by Dniprovsk State Technical University in Математичне моделювання
- No. 2(49),p. 182-197
ДОСЛІДЖЕННЯ ВЗАЄМОЗВ'ЯЗКУ МІЖ ТЕМПЕРАТУРОЮ КІНЦЯ ГАРЯЧОЇ ДЕФОРМАЦІЇ ТА КОМПЛЕКСОМ МЕХАНІЧНИХ ВЛАСТИВОСТЕЙ НИЗЬКОВУГЛЕЦЕВИХ НИЗЬКОЛЕГОВАНИХ СТАЛЕЙ НА ОСНОВІ АНАЛІЗУ РЕГРЕСІЙНИХ МОДЕЛЕЙ
У роботі розглянуто основні методики проведення статистичного аналізу масивів експериментальних даних. На підставі критеріїв теорії ймовірності та математичної статистики побудовані регресійні моделі залежностей механічних характеристик (границі плинності, границі міцності і відносного видовження) від температури кінця гарячої деформації. Проведена оцінка адекватності отриманих моделей за методом залишків. На підставі отриманих моделей побудовані графіки залежностей механічних характеристик від температури кінця гарячої деформації і здійснено їх аналіз.
- 14 December 2023
- Published by Dniprovsk State Technical University in Математичне моделювання
- No. 2(49),p. 182-197
Open AccessДОСЛІДЖЕННЯ ВЗАЄМОЗВ'ЯЗКУ МІЖ ТЕМПЕРАТУРОЮ КІНЦЯ ГАРЯЧОЇ ДЕФОРМАЦІЇ ТА КОМПЛЕКСОМ МЕХАНІЧНИХ ВЛАСТИВОСТЕЙ НИЗЬКОВУГЛЕЦЕВИХ НИЗЬКОЛЕГОВАНИХ СТАЛЕЙ НА ОСНОВІ АНАЛІЗУ РЕГРЕСІЙНИХ МОДЕЛЕЙ
У роботі розглянуто основні методики проведення статистичного аналізу масивів експериментальних даних. На підставі критеріїв теорії ймовірності та математичної статистики побудовані регресійні моделі залежностей механічних характеристик (границі плинності, границі міцності і відносного видовження) від температури кінця гарячої деформації. Проведена оцінка адекватності отриманих моделей за методом залишків. На підставі отриманих моделей побудовані графіки залежностей механічних характеристик від температури кінця гарячої деформації і здійснено їх аналіз.