TSTianbao Song

Tianbao Song

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tianbao Song has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • 3-D Negative-Sequence Current Reconstruction Method for DC Bus Voltage Ripple Suppression

    by Tianbao Song, Yun Zhang, Zhen Huang

    The negative-sequence components in the unbalanced grid will lead to the dc bus voltage ripple, as well as the grid current harmonics. Existing methods rely on the grid voltage, inductance, and rectifier voltage to calculate the compensation current or power to suppress the voltage ripple. Once the parameters are not accurately obtained, the performance of these methods will be affected. In this article, a 3-D cone model is established to describe the relationship between the negative-sequence active, reactive currents, and the dc bus voltage ripple amplitude. Based on this model, a 3-D negative-sequence current reconstruction method is proposed to suppress the dc bus voltage ripple. By detecting the point coordinates on the 3-D cone model, the positions of the cone vertices can be reconstructed, which means the negative-sequence currents that eliminate the dc bus voltage ripple can be found. Finally, the accuracy of the theoretical analysis and the effectiveness of the proposed method are verified experimentally, and more than 94% fluctuating voltage can be effectively suppressed.


  • High Gain Proportional Resonant Voltage Ripple Suppression for PWM Rectifiers Under Unbalanced Grid

    by Yun Zhang, Xiaoyu Bai, Yongping Gao, Tianbao Song, Zhen Huang, Xiaoran Wang

    Pulsewidth modulation rectifiers ensure a sinusoidal waveform of the input current, achieve a unit power factor, and maintain a stable dc voltage. However, under unbalanced grid conditions, the grid current becomes distorted, and the dc voltage exhibits a secondary ripple. To solve these problems, this article proposes a high gain proportional resonant (HGPR) ripple suppression method, the ripple suppression speed of the HGPR is faster than that of proportional resonant controllers, compared to quasi proportional resonant controllers, the HGPR controller offers higher gain and reduced steady-state error while maintaining a similar bandwidth and thus not affecting the stability of the system while maintaining the same parameter configuration. Compared with the existing dc voltage ripple suppression methods, the method proposed in this article has stronger ripple suppression capability, lower computational complexity, and excellent dynamic performance. Finally, the experimental results demonstrate that the proposed HGPR method can achieve low ripple dc voltage and low total harmonic distortion of current under grid voltage unbalance.


  • Sparse Self-Attentive Transformer With Multiscale Feature Fusion on Long-Term SOH Forecasting

    by Xinshan Zhu, Chengqian Xu, Tianbao Song, Zhen Huang, Yun Zhang

    The estimation of the state of health (SOH) of lithium-ion batteries (LIBs) plays an important role in ensuring the safe and stable operation of LIB management systems. In order to more accurately predict SOH, a model based on a sparse self-attentive transformer (SSAT) with multitimescale feature fusion is proposed. The SSAT follows an encoder-decoder structure construction, and the model inputs are the extracted health indicators and SOH sequences. The encoder stacks three cross-stage partial (CSP)-ProbSparse attention self-attention blocks, between every two CSP-ProbSparse attention blocks, connections are made by dilated causal convolution and max-pooling layers to obtain exponential growth of the sensory field. All the feature maps output from the self-attention blocks are integrated by multiscale feature fusion, and finally, the appropriate feature dimensions are fed to the decoder through a transition layer to obtain the estimation of SOH. Numerous comparative and ablation experiments have demonstrated that the SSAT model achieves superior performance in a wide range of situations.


  • DC Bus Capacitance Identification Method Based on Frequency Domain Data Drive for EV Charging System

    by Ping Wang, Ge Yan, Yun Zhang, Zhen Huang, Tianbao Song, Chengqian Xu, Xinshan Zhu

    For an electric vehicle charging system, its control performance and reliability are affected by the health and aging of dc bus capacitor in the three-phase pulsewidth modulation (PWM) rectifier. To monitor the status of capacitor and then adjust the operation mode in time, a dc bus capacitance identification method based on the frequency domain data-driven approach is proposed. It has advantages such as high accuracy and high applicability. It uses all the data in one cycle for identification and is less affected by noise. There is no need for iterative calculation, and the identification speed is fast. Compared with the neural network identification method, the proposed method does not need to be trained under various working conditions and overcomes the disadvantage of limited application conditions. The bandpass filter is used to extract the capacitor voltage and current components, which can be used in the case of unknown loads. Transforming the time-domain model into frequency-domain model, the identification stability can be improved. In this article, the experimental platform of a three-phase PWM rectifier is built. The experiment results have verified the accuracy of the proposed method and its applicability in different loads.


  • Data-Driven Adaptive Negative Sequence Current Control Method for PWM Rectifier Under Unbalanced Grid

    by Tianbao Song, Yun Zhang, Fei Gao, Chengqian Xu, Xinshan Zhu

    Three phase PWM rectifiers have excellent performance when the grid voltages are balanced, and it is widely adopted in the industry. However, the asymmetrical loads or grid faults will lead to the unbalanced grid voltages. In addition, the negative sequence (NS) voltages and currents in the unbalanced grid result in the fluctuation of the DC bus voltage. In this paper, the intrinsic mechanism between the voltage ripple amplitude and the NS currents is revealed. Furthermore, this paper proposes a data-driven adaptive current control method. By shaping the NS currents, the corresponding amplitudes of the 2nd-order harmonic voltage on the DC bus are observed. Based on the observation data, the reference currents that can minimize the DC bus voltage ripple are adaptively derived online. As a result, the DC bus voltage ripple can be suppressed effectively. In addition, the proposed method does not need the NS decomposition or the parameters such as the grid voltages and inductances. Therefore, it has a strong robustness against parameter mismatch. Finally, the accuracy of the theoretical analysis and the effectiveness of the proposed method are validated by experiments.


  • Motor Driver-Based Topology of Integrated On-Board Charging System and Data-Driven Inductance Identification Method

    by Yun Zhang, Chuanheng Yao, Fei Gao, Tianbao Song, Yu Tang, Xinshan Zhu

    This paper presents a topology of integrated on-board charging system with separated inductors on grid side. It employs the on-board three-phase electric power converter in time-division multiplexing, and separates the grid side inductors from the vehicle, reducing volume, weight and cost of the on-board charging system. To provide an accurate inductance for the control system, a data-driven inductance identification method is proposed. The inductance is first identified at the uncontrolled rectification stage, then the real-time online inductance correction is further implemented at the PWM rectification stage. In addition, the operating principle and structural characteristics of the proposed topology are discussed, and the inductance identification method is analyzed in detail. Finally, a 2 kW experimental prototype is built to validate the correctness of the theoretical analysis and effectiveness of the proposed identification method applied to the proposed topology in this paper.