Samantha L. Roenigk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Samantha L. Roenigk has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- James R. McKone
University of Pittsburgh
2 shared publications - Advay Naval Shirwalkar
University of Pittsburgh
1 shared publication Qiudi Meng
Department of Chemical and Petroleum Engineering, University of Pittsburgh, Pittsburgh, Pennsylvania 15260, United States of America
1 shared publication- Rituja Patil
University of Pittsburgh
1 shared publication
Latest Publications
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (62) , 4169
CO2 Hydrogenation through Electrochemical Hydrogen Activation in a Gas-Vapor Fed Reactor
An attractive concept in the chemical manufacturing industry is the adoption of a circular carbon economy, which can include continuous capture and conversion of CO2 into industrially relevant chemical feedstocks. This has driven considerable research interest in electrochemical CO2 reduction.1 Despite this popularity, major challenges remain even for the most advanced CO2 reduction reactors, including low conversion rates and energy efficiencies; moreover, in many cases, multiple carbon-containing products are generated, which add to costs for downstream separation.2 By contrast, thermochemical CO2 hydrogenation is well established and typically demonstrates higher energy efficiency and selectivity compared to electrochemical CO2 reduction.3,4 This notable contrast drives our interest in better understanding the physics that governs differences in reactivity between thermocatalytic and electrocatalytic CO2 reduction reactors. To address these questions, we are pursuing a unique approach that involves feeding humidified CO2 and H2, respectively, to the cathode and anode of an electrochemical membrane-electrode assembly (MEA). This presentation will cover initial work we have undertaken to design and validate this reactor for the study CO2 electro-reduction. The overall design of our reactor resembles a hydrogen fuel cell fed with humidified H2 and CO2. Thus, it was initially benchmarked through operation as an electrochemical hydrogen pump, wherein humidified Ar was fed to the cathode and humidified H2 was fed to the anode with Pt/C as the catalyst on each side of the membrane. Under these conditions, a cation exchange membrane (CEM) readily generated current densities in excess of 1 A/cm2 with monotonic decreases in polarization with increased temperature at fixed current. We then undertook analogous hydrogen pumping experiments using anion exchange membranes (AEM) that had been ion-exchanged with hydroxide, carbonate, and bicarbonate anions. We observed net proton transport between the anode and cathode chambers in each case, albeit with higher ionic resistance for AEMs in the bicarbonate form. We then undertook further studies to demonstrate the ability to reduce CO2 using H2 fed to the anode. This operating mode eliminates the need for a liquid anode feed, which dramatically reduces the driving force for CO2 crossover via bicarbonate formation. Moreover, the Pt/C anode catalyst is expected to oxidize hydrogen with minimal polarization, allowing the total cell polarization to be interpreted simply as the cathode potential on the RHE scale. CO2 reduction experiments were carried out using commercial Cu/C catalyst with online gas chromatography and NMR for product analysis of volatile and condensable products, respectively. Operation with a CEM yielded only H2(g) at the cathode, but initial experiments with an AEM in the carbonate/bicarbonate form gave high selectivity to ethanol at 70 oC. References: Sebastian-Pascual,P; Mezzavilla,S; Stephens,I,; Escudero-Escribano,M. Structure-Sensitivity and Electrolyte Effects in CO2 electroreduction: Fom Model Studies to Applications, ChemCatChem 2019,11,16,3626-3645. Higgins.D.; Hahn,C.; Xiang,C.; Jaramillo, T.F.; Weber, A. Z. Gas-Diffusion Electrodes for Carbon Dioxide Reduction: A New Paradigm. ACS Energy Letters 2019, 4, 1, 317-324. Gao, J.; Choo Sze Shiong, S.; Liu,Y.Reduction of CO2 to chemicals and Fuels: Thermocatalysis versus electrocatalysis, Chemical Engineering Journal 2023, 472, 145033 Alli, Y. A.; Oladoye, P. O.; Ejeromedoghene, O.; Bankole, O. M.; Alimi, O. A.; Omotola, E. O.; Olanrewaju, C. A.; Philippot, K.; Adeleye, A. S.; Ogunlaja, A. S. Nanomaterials as Catalysts for CO2 Transformation into Value-Added Products: A Review. Science of The Total Environment 2023, 868, 161547.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (62) , 4169
CO2 Hydrogenation through Electrochemical Hydrogen Activation in a Gas-Vapor Fed Reactor
An attractive concept in the chemical manufacturing industry is the adoption of a circular carbon economy, which can include continuous capture and conversion of CO2 into industrially relevant chemical feedstocks. This has driven considerable research interest in electrochemical CO2 reduction.1 Despite this popularity, major challenges remain even for the most advanced CO2 reduction reactors, including low conversion rates and energy efficiencies; moreover, in many cases, multiple carbon-containing products are generated, which add to costs for downstream separation.2 By contrast, thermochemical CO2 hydrogenation is well established and typically demonstrates higher energy efficiency and selectivity compared to electrochemical CO2 reduction.3,4 This notable contrast drives our interest in better understanding the physics that governs differences in reactivity between thermocatalytic and electrocatalytic CO2 reduction reactors. To address these questions, we are pursuing a unique approach that involves feeding humidified CO2 and H2, respectively, to the cathode and anode of an electrochemical membrane-electrode assembly (MEA). This presentation will cover initial work we have undertaken to design and validate this reactor for the study CO2 electro-reduction. The overall design of our reactor resembles a hydrogen fuel cell fed with humidified H2 and CO2. Thus, it was initially benchmarked through operation as an electrochemical hydrogen pump, wherein humidified Ar was fed to the cathode and humidified H2 was fed to the anode with Pt/C as the catalyst on each side of the membrane. Under these conditions, a cation exchange membrane (CEM) readily generated current densities in excess of 1 A/cm2 with monotonic decreases in polarization with increased temperature at fixed current. We then undertook analogous hydrogen pumping experiments using anion exchange membranes (AEM) that had been ion-exchanged with hydroxide, carbonate, and bicarbonate anions. We observed net proton transport between the anode and cathode chambers in each case, albeit with higher ionic resistance for AEMs in the bicarbonate form. We then undertook further studies to demonstrate the ability to reduce CO2 using H2 fed to the anode. This operating mode eliminates the need for a liquid anode feed, which dramatically reduces the driving force for CO2 crossover via bicarbonate formation. Moreover, the Pt/C anode catalyst is expected to oxidize hydrogen with minimal polarization, allowing the total cell polarization to be interpreted simply as the cathode potential on the RHE scale. CO2 reduction experiments were carried out using commercial Cu/C catalyst with online gas chromatography and NMR for product analysis of volatile and condensable products, respectively. Operation with a CEM yielded only H2(g) at the cathode, but initial experiments with an AEM in the carbonate/bicarbonate form gave high selectivity to ethanol at 70 oC. References: Sebastian-Pascual,P; Mezzavilla,S; Stephens,I,; Escudero-Escribano,M. Structure-Sensitivity and Electrolyte Effects in CO2 electroreduction: Fom Model Studies to Applications, ChemCatChem 2019,11,16,3626-3645. Higgins.D.; Hahn,C.; Xiang,C.; Jaramillo, T.F.; Weber, A. Z. Gas-Diffusion Electrodes for Carbon Dioxide Reduction: A New Paradigm. ACS Energy Letters 2019, 4, 1, 317-324. Gao, J.; Choo Sze Shiong, S.; Liu,Y.Reduction of CO2 to chemicals and Fuels: Thermocatalysis versus electrocatalysis, Chemical Engineering Journal 2023, 472, 145033 Alli, Y. A.; Oladoye, P. O.; Ejeromedoghene, O.; Bankole, O. M.; Alimi, O. A.; Omotola, E. O.; Olanrewaju, C. A.; Philippot, K.; Adeleye, A. S.; Ogunlaja, A. S. Nanomaterials as Catalysts for CO2 Transformation into Value-Added Products: A Review. Science of The Total Environment 2023, 868, 161547.
- Open Access
- 28 March 2024
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 171 (3) , 036509
Unsupported Pt Nanoparticles: Synthesis, Deactivation, and Hydrogen Electrocatalysis in Unpurified Electrolytes
Platinum is ubiquitous in electrochemical catalysis owing to its ability to accelerate redox reactions involving surface-bound hydrogen and oxygen. Accordingly, Pt is used as a calibration standard and activity benchmark against which novel electrocatalysts are compared. These measurements are often executed in unpurified, reagent grade electrolytes where Pt is also susceptible to deactivation by several routes. This constitutes a challenge where the ease of making measurements with Pt-based catalysts must be balanced against the difficulty of obtaining accurate and consistent results. We report herein a synthetic procedure for unsupported Pt nanoparticles that uses readily available reagents and laboratory apparatus, with the goal of making high-quality control experiments in electrocatalysis as accessible as possible. We also identified conditions under which these particles deactivate in unpurified aqueous acid and base and differentiated between mechanisms involving catalyst poisoning, which dominates at more negative applied potentials, and particle growth, which dominates at positive potentials where Pt-oxide species are produced. Finally, we demonstrated that unsupported Pt nanoparticle films can be used to good effect for reference electrode calibration and benchmarking of hydrogen evolution/oxidation electrocatalysts, even in unpurified electrolytes, provided steps are taken to minimize the impact of deactivation.
- 28 March 2024
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 171 (3) , 036509
Open AccessUnsupported Pt Nanoparticles: Synthesis, Deactivation, and Hydrogen Electrocatalysis in Unpurified Electrolytes
Platinum is ubiquitous in electrochemical catalysis owing to its ability to accelerate redox reactions involving surface-bound hydrogen and oxygen. Accordingly, Pt is used as a calibration standard and activity benchmark against which novel electrocatalysts are compared. These measurements are often executed in unpurified, reagent grade electrolytes where Pt is also susceptible to deactivation by several routes. This constitutes a challenge where the ease of making measurements with Pt-based catalysts must be balanced against the difficulty of obtaining accurate and consistent results. We report herein a synthetic procedure for unsupported Pt nanoparticles that uses readily available reagents and laboratory apparatus, with the goal of making high-quality control experiments in electrocatalysis as accessible as possible. We also identified conditions under which these particles deactivate in unpurified aqueous acid and base and differentiated between mechanisms involving catalyst poisoning, which dominates at more negative applied potentials, and particle growth, which dominates at positive potentials where Pt-oxide species are produced. Finally, we demonstrated that unsupported Pt nanoparticle films can be used to good effect for reference electrode calibration and benchmarking of hydrogen evolution/oxidation electrocatalysts, even in unpurified electrolytes, provided steps are taken to minimize the impact of deactivation.