Gustavo Alonso Talledo Baila
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Gustavo Alonso Talledo Baila has a total of 1 co-authors. Here are the top co-authors by number of shared publications:
Latest Publications
- Open Access
- 18 April 2024
- Published by Periodica Polytechnica Budapest University of Technology and Economics in Periodica Polytechnica Civil Engineering
- Vol. 68 (3) , 833-841
Influence of Thermoplastic Polyurethane on the Properties of Asphalt Cement and the Elastic Behavior of Asphalt Mixtures
The useful life of pavements determines the design of asphalt mixtures. However, premature structural failures and low durability are one of the main problems in pavement engineering today. The action of loads produced by traffic, exposure to environmental factors and the inadequacy of conventional designs of asphalt pavements are some of the main problems associated with the durability of the pavement. The modification of asphalt binders is an alternative that has been used for some years to improve the properties of bituminous material. Among the modifying materials are elastomers, a class of polymers with elastic properties that can be heat-treated. In this study, the asphalt was modified by wet means by adding 5, 10 and 15% of Thermoplastic Polyurethane (TPU) by weight of the binder. Subsequently, standard samples were prepared with the characterized constituents and mixtures with the modified asphalt cement. Consequently, tests were carried out to obtain the optimal mixture that improves the properties of conventional pavement. The results show that the optimal TPU addition content is 5%. With this percentage, the modified binder presented a greater elastic recovery of up to 5.60% and a reduction of up to 42.6% in penetration compared to conventional asphalt. In addition, using the Marshall method, it was determined that the stability of the modified mixtures was much higher than that of standard mixtures for light, medium and heavy traffic; so, they will have a higher resistance to deformation and better fatigue behavior.
- 18 April 2024
- Published by Periodica Polytechnica Budapest University of Technology and Economics in Periodica Polytechnica Civil Engineering
- Vol. 68 (3) , 833-841
Open AccessInfluence of Thermoplastic Polyurethane on the Properties of Asphalt Cement and the Elastic Behavior of Asphalt Mixtures
The useful life of pavements determines the design of asphalt mixtures. However, premature structural failures and low durability are one of the main problems in pavement engineering today. The action of loads produced by traffic, exposure to environmental factors and the inadequacy of conventional designs of asphalt pavements are some of the main problems associated with the durability of the pavement. The modification of asphalt binders is an alternative that has been used for some years to improve the properties of bituminous material. Among the modifying materials are elastomers, a class of polymers with elastic properties that can be heat-treated. In this study, the asphalt was modified by wet means by adding 5, 10 and 15% of Thermoplastic Polyurethane (TPU) by weight of the binder. Subsequently, standard samples were prepared with the characterized constituents and mixtures with the modified asphalt cement. Consequently, tests were carried out to obtain the optimal mixture that improves the properties of conventional pavement. The results show that the optimal TPU addition content is 5%. With this percentage, the modified binder presented a greater elastic recovery of up to 5.60% and a reduction of up to 42.6% in penetration compared to conventional asphalt. In addition, using the Marshall method, it was determined that the stability of the modified mixtures was much higher than that of standard mixtures for light, medium and heavy traffic; so, they will have a higher resistance to deformation and better fatigue behavior.