Xiaomin Kang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiaomin Kang has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
Fang Wang
2 shared publicationsDan Luo
State Key Laboratory of Catalysis Dalian Institute of Chemical Physics Chinese Academy of Sciences Dalian People's Republic of China
1 shared publicationDanni Liu
Shenzhen Univ, Coll Mat Sci & Engn, Guangdong Res Ctr Interfacial Engn Funct Mat, Shenzhen Key Lab Polymer Sci & Technol, Shenzhen 518060, Peoples R China
1 shared publicationDewen Tang
School of Mechanical Engineering University of South China Hengyang People's Republic of China
1 shared publicationDong Liang Li
School of Mechanical Engineering University of South China Hengyang 421001 China
1 shared publicationGenlu You
Univ South China, Sch Mech Engn, Hengyang 421001, Peoples R China
1 shared publication
Latest Publications
- 19 October 2026
- Published by Wiley in Energy Technology
- Vol. 14 (10)
Multiscale Regulation of Metal–Organic Frameworks in Lithium‐Ion Battery Separators: Mechanism, Strategy, and Performance Optimization
Lithium‐ion polypropylene (PP) separators limit high‐energy Li‐ion batteries due to poor thermal stability, low wettability, and weak dendrite suppression. Metal–organic frameworks (MOFs) provide a viable solution through tunable pores, high surface area, and versatile surface chemistry. This review summarizes multiscale regulation strategies for MOFs‐modified PP separators. It classifies applicable MOFs into three topological types—ZIF, UiO, and HKUST—and analyzes their distinct mechanisms in enhancing ion transport and interfacial dynamics. Four primary fabrication techniques (coating, blending, in situ growth, and composite construction) are systematically compared for their suitability and performance outcomes. Key challenges remain, including high costs, poor interface compatibility, and insufficient long‐term stability. Future development requires integrating multiscale structural engineering, intelligent dynamic interfaces, and cost‐effective green manufacturing. This review offers a practical framework for designing advanced separators for next‐generation high‐safety, high‐energy‐density Li‐ion batteries.
- 19 October 2026
- Published by Wiley in Energy Technology
- Vol. 14 (10)
Multiscale Regulation of Metal–Organic Frameworks in Lithium‐Ion Battery Separators: Mechanism, Strategy, and Performance Optimization
Lithium‐ion polypropylene (PP) separators limit high‐energy Li‐ion batteries due to poor thermal stability, low wettability, and weak dendrite suppression. Metal–organic frameworks (MOFs) provide a viable solution through tunable pores, high surface area, and versatile surface chemistry. This review summarizes multiscale regulation strategies for MOFs‐modified PP separators. It classifies applicable MOFs into three topological types—ZIF, UiO, and HKUST—and analyzes their distinct mechanisms in enhancing ion transport and interfacial dynamics. Four primary fabrication techniques (coating, blending, in situ growth, and composite construction) are systematically compared for their suitability and performance outcomes. Key challenges remain, including high costs, poor interface compatibility, and insufficient long‐term stability. Future development requires integrating multiscale structural engineering, intelligent dynamic interfaces, and cost‐effective green manufacturing. This review offers a practical framework for designing advanced separators for next‐generation high‐safety, high‐energy‐density Li‐ion batteries.
- 12 July 2026
- Published by Wiley in Advanced Materials
- p. e74049
Direct Visualization and Regulation of Interfacial Ion Concentration Layer at Zinc Metal Interfaces via an Ion‐Buffering Artificial Solid Electrolyte Interphase
Direct experimental visualization of the electrical double layer (EDL) and its associated layer formation at metal–electrolyte interfaces remains challenging yet is essential for understanding interfacial instability in zinc metal anodes. Herein, we engineer a PEO/PIM‐1 hybrid polymer (PIP) as an artificial solid–electrolyte interphase (SEI) that replaces field‐driven interfacial ion accumulation with confined ion buffering, thereby suppressing EDL amplification and chaotic interfacial dynamics. Liquid‐phase atomic force microscopy (AFM) measurements demonstrate the elimination of voltage‐dependent force amplification upon PIP modification, evidencing effective decoupling of electric‐field‐induced ion crowding at the Zn surface. In situ Raman spectroscopy, electrochemical analysis, and molecular dynamics simulations further reveal reduced interfacial water activity, regulated ion distribution, and homogeneous Zn stripping and deposition. PIP significantly enhances anode stability, enabling Zn|Zn symmetric cells to cycle for 2700 h and delivering a Coulombic efficiency of 98.6% in Zn|Ti cells. When coupled with I 2 cathodes, PIP@Zn supports long‐life 4e − Zn|I 2 batteries, achieving >6000 cycles at 4 A g −1 and >27 000 cycles at 8 A g −1 . For the practical application, 4e − Zn|I 2 pouch cell delivers 500 mAh capacity and 500 cycles. This work offers a mechanistic framework for probing EDL dynamics and a generalizable SEI strategy for stabilizing Zn metal.
- 12 July 2026
- Published by Wiley in Advanced Materials
- p. e74049
Direct Visualization and Regulation of Interfacial Ion Concentration Layer at Zinc Metal Interfaces via an Ion‐Buffering Artificial Solid Electrolyte Interphase
Direct experimental visualization of the electrical double layer (EDL) and its associated layer formation at metal–electrolyte interfaces remains challenging yet is essential for understanding interfacial instability in zinc metal anodes. Herein, we engineer a PEO/PIM‐1 hybrid polymer (PIP) as an artificial solid–electrolyte interphase (SEI) that replaces field‐driven interfacial ion accumulation with confined ion buffering, thereby suppressing EDL amplification and chaotic interfacial dynamics. Liquid‐phase atomic force microscopy (AFM) measurements demonstrate the elimination of voltage‐dependent force amplification upon PIP modification, evidencing effective decoupling of electric‐field‐induced ion crowding at the Zn surface. In situ Raman spectroscopy, electrochemical analysis, and molecular dynamics simulations further reveal reduced interfacial water activity, regulated ion distribution, and homogeneous Zn stripping and deposition. PIP significantly enhances anode stability, enabling Zn|Zn symmetric cells to cycle for 2700 h and delivering a Coulombic efficiency of 98.6% in Zn|Ti cells. When coupled with I 2 cathodes, PIP@Zn supports long‐life 4e − Zn|I 2 batteries, achieving >6000 cycles at 4 A g −1 and >27 000 cycles at 8 A g −1 . For the practical application, 4e − Zn|I 2 pouch cell delivers 500 mAh capacity and 500 cycles. This work offers a mechanistic framework for probing EDL dynamics and a generalizable SEI strategy for stabilizing Zn metal.
- 8 March 2025
- Published by Wiley in Energy Technology
- Vol. 13 (8)
Comprehensive Application of Phase Change Materials in Lithium‐Ion Battery Thermal Management: From Single Cooling to Coupled Systems
Phase change materials (PCMs), renowned for their superior heat storage capabilities, face the challenge of inherently low thermal conductivity (k). This review comprehensively examines strategies to enhance PCM k and thermal energy storage density across four fronts: single component optimization, composites with varied composition ratios, advanced processing technologies, and doping with small molecules. Notably, including 10% expanded graphite in paraffin has been shown to enhance thermal conductivity by over ten times that of pure paraffin. The integration of PCM cooling with air and liquid cooling methods leverages the high heat storage capacity of PCMs and the rapid heat transfer capabilities of these other cooling methods, effectively controlling battery temperatures and reducing temperature gradients within the battery module. For instance, combining PCM with air cooling has been demonstrated to minimize maximum temperatures (Tm) and temperature differences (Td), maintaining Tm within an ideal range of 2 °C. Despite these advantages, further research is warranted to address the limitations of PCMs, such as their limited heat absorption and extended thermal recovery periods, to broaden the application of PCM cooling technology.
- 8 March 2025
- Published by Wiley in Energy Technology
- Vol. 13 (8)
Comprehensive Application of Phase Change Materials in Lithium‐Ion Battery Thermal Management: From Single Cooling to Coupled Systems
Phase change materials (PCMs), renowned for their superior heat storage capabilities, face the challenge of inherently low thermal conductivity (k). This review comprehensively examines strategies to enhance PCM k and thermal energy storage density across four fronts: single component optimization, composites with varied composition ratios, advanced processing technologies, and doping with small molecules. Notably, including 10% expanded graphite in paraffin has been shown to enhance thermal conductivity by over ten times that of pure paraffin. The integration of PCM cooling with air and liquid cooling methods leverages the high heat storage capacity of PCMs and the rapid heat transfer capabilities of these other cooling methods, effectively controlling battery temperatures and reducing temperature gradients within the battery module. For instance, combining PCM with air cooling has been demonstrated to minimize maximum temperatures (Tm) and temperature differences (Td), maintaining Tm within an ideal range of 2 °C. Despite these advantages, further research is warranted to address the limitations of PCMs, such as their limited heat absorption and extended thermal recovery periods, to broaden the application of PCM cooling technology.