Xiaomin Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiaomin Zhao has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Guohua Chen
College of Materials Science and Engineering, Huaqiao University, Xiamen 361021, China
2 shared publications Xianxin Guo
College of Materials Science and Engineering Huaqiao University Xiamen China
2 shared publicationsJinrong Li
College of Materials Science and Engineering Huaqiao University Xiamen China
1 shared publication- Jinrong Li
College of Materials Science and Engineering, Huaqiao University, Xiamen 361021, China
1 shared publication Lintao Zhou
College of Materials Science and Engineering Huaqiao University Xiamen China
1 shared publicationLinyi Shui
College of Materials Science and Engineering Huaqiao University Xiamen China
1 shared publication
Latest Publications
- 7 October 2026
- Published by Wiley in Journal of Polymer Science
- Vol. 64 (22) , 4783-4796
Plasticizing Modification of Bio‐Based Polyamide 4 With Lewis Acids and Its Nonisothermal Crystallization Kinetics
The plastic pollution crisis highlights the urgent demand for bio‐based biodegradable polymers. Polyamide 4 (PA4) is a promising candidate, yet its application is severely limited by an extremely narrow thermal processing window (≈2°C). This work broadens this window through Lewis acid (LA) complexation modification and investigates the influence of CaCl 2 on the crystallization kinetics of PA4. Results show that specific LA, particularly CaCl 2 , acts as multifunctional modifiers. CaCl 2 interacts with the amide groups of PA4 and modifies the intermolecular hydrogen‐bonding network. This unique interaction significantly increases ductility (elongation at break rises from 99% to 211%) while maintaining tensile strength and approximately maintaining the thermal degradation temperature, and most critically, broadens the thermal processing window from 2°C to 24°C primarily by lowering the melting temperature. Advanced nonisothermal crystallization kinetics analysis reveals a novel concentration‐dependent dual mechanism of CaCl 2 : chain‐complexation dominates at low loadings, while heterogeneous nucleation prevails at 7 wt.%, substantially reducing the crystallization activation energy (Δ E = −23.36 KJ mol −1 ). This clarifies the precise pathway for regulating PA4 crystallization via additives. In summary, this study elucidates the precise pathway for regulating PA4 crystallization via additives, providing a reference for the thermal processing applications of materials with limited thermal processing windows.
- 7 October 2026
- Published by Wiley in Journal of Polymer Science
- Vol. 64 (22) , 4783-4796
Plasticizing Modification of Bio‐Based Polyamide 4 With Lewis Acids and Its Nonisothermal Crystallization Kinetics
The plastic pollution crisis highlights the urgent demand for bio‐based biodegradable polymers. Polyamide 4 (PA4) is a promising candidate, yet its application is severely limited by an extremely narrow thermal processing window (≈2°C). This work broadens this window through Lewis acid (LA) complexation modification and investigates the influence of CaCl 2 on the crystallization kinetics of PA4. Results show that specific LA, particularly CaCl 2 , acts as multifunctional modifiers. CaCl 2 interacts with the amide groups of PA4 and modifies the intermolecular hydrogen‐bonding network. This unique interaction significantly increases ductility (elongation at break rises from 99% to 211%) while maintaining tensile strength and approximately maintaining the thermal degradation temperature, and most critically, broadens the thermal processing window from 2°C to 24°C primarily by lowering the melting temperature. Advanced nonisothermal crystallization kinetics analysis reveals a novel concentration‐dependent dual mechanism of CaCl 2 : chain‐complexation dominates at low loadings, while heterogeneous nucleation prevails at 7 wt.%, substantially reducing the crystallization activation energy (Δ E = −23.36 KJ mol −1 ). This clarifies the precise pathway for regulating PA4 crystallization via additives. In summary, this study elucidates the precise pathway for regulating PA4 crystallization via additives, providing a reference for the thermal processing applications of materials with limited thermal processing windows.
- Open Access
Thermal, Crystallization, and Toughness Behavior of Polyamide 4/Long-Chain Hyperbranched Polymer Blends
Long-chain hyperbranched polyesters (LHBPx, x = 1, 2, 3) with varying lengths of branched chains were synthesized through a thiol-ene click reaction. Subsequently, LHBPx was incorporated into PA4 via the solution method to prepare a LHBPx/PA4 polymer blend, aiming to address the limitations of PA4, such as its narrow thermal processing window (△T = Td5−Tm) and high brittleness. The results demonstrated that the addition of LHBPx enhanced the △T of PA4 from 1.6 °C to 14.5 °C (LHBP3/PA4), increasing the rheological properties of LHBPx/PA4 polymer blends, thereby improving its thermal processability. Compared with PA4, the elongation at the break of the LHBP3/PA4 polymer blend was increased by 20.4%, and the brittle fracture was changed into a ductile fracture. The crystallinity of PA4 was greatly decreased, from 54.41% to 37.42%, owing to the incorporation of LHBPx, whereas Tm of PA4 had almost no change. It was explained that LHBPx hindered the crystal growth stage, whereas it promoted the nucleation stage of PA4, resulting in no significant change in crystal type. Moreover, the longer the branched chain of LHBPx was, the more pronounced the improvement in the thermal processability and toughness of PA4 became. Above all, this work was meaningful for the potential application of PA4 in industrial plastics.
Open AccessThermal, Crystallization, and Toughness Behavior of Polyamide 4/Long-Chain Hyperbranched Polymer Blends
Long-chain hyperbranched polyesters (LHBPx, x = 1, 2, 3) with varying lengths of branched chains were synthesized through a thiol-ene click reaction. Subsequently, LHBPx was incorporated into PA4 via the solution method to prepare a LHBPx/PA4 polymer blend, aiming to address the limitations of PA4, such as its narrow thermal processing window (△T = Td5−Tm) and high brittleness. The results demonstrated that the addition of LHBPx enhanced the △T of PA4 from 1.6 °C to 14.5 °C (LHBP3/PA4), increasing the rheological properties of LHBPx/PA4 polymer blends, thereby improving its thermal processability. Compared with PA4, the elongation at the break of the LHBP3/PA4 polymer blend was increased by 20.4%, and the brittle fracture was changed into a ductile fracture. The crystallinity of PA4 was greatly decreased, from 54.41% to 37.42%, owing to the incorporation of LHBPx, whereas Tm of PA4 had almost no change. It was explained that LHBPx hindered the crystal growth stage, whereas it promoted the nucleation stage of PA4, resulting in no significant change in crystal type. Moreover, the longer the branched chain of LHBPx was, the more pronounced the improvement in the thermal processability and toughness of PA4 became. Above all, this work was meaningful for the potential application of PA4 in industrial plastics.
- 27 August 2024
- Published by Wiley in Polymer Composites
- Vol. 45 (18) , 16823-16831
A transparent, anti‐blue‐light, and high strength nylon/nickel phosphate oligomer nanocomposite formed via intermolecular hydrogen bond crosslinking
Polymer/transition metal inorganic salts nanocomposites are promising engineering materials in automotive, electronics, aerospace and smart wearables fields. However, the interfacial incompatibility always causes agglomeration and phase separation, constraining their further application. Inspired by inorganic oligomers' polymerization, nylon/nickel phosphate oligomer (NPO) nanocomposite (ENCC) was prepared via hydrogen bond crosslinking method. Due to the formation of hydrogen bonds between PO43− end groups of NPO with an average diameter of 6.5 ± 1.2 nm and NH groups on the nylon molecular chain, the phase compatibility is greatly improved. Hence, NPO was uniformly nano‐dispersed and had no obvious agglomerate in ENCC, inducing an invisible phase interface at nano‐micro scale. Nylon/nickel phosphate oligomer showed an excellent reinforcing effect on nylon, the tensile strength and elongation of ENCC reached 28 ± 0.8 MPa and 585 ± 26% at a high loading of 20 wt%, increased by 155% and 92%, compared with pure matrix, respectively. Furthermore, ENCC was still optically transparent and had excellent anti‐blue‐light performance (up to 96.6%).Highlights: Novel inorganic/nylon composite prepared by hydrogen bond crosslinking method. Phase separation and aggregation problems were solved remarkably. Inorganic metal phosphate dispersed with a diameter of 6.5 ± 1.2 nm. The composite was still transparent at 20 wt% loading of metal phosphate. Tensile strength and elongation increased by 155% and 92%, respectively.
- 27 August 2024
- Published by Wiley in Polymer Composites
- Vol. 45 (18) , 16823-16831
A transparent, anti‐blue‐light, and high strength nylon/nickel phosphate oligomer nanocomposite formed via intermolecular hydrogen bond crosslinking
Polymer/transition metal inorganic salts nanocomposites are promising engineering materials in automotive, electronics, aerospace and smart wearables fields. However, the interfacial incompatibility always causes agglomeration and phase separation, constraining their further application. Inspired by inorganic oligomers' polymerization, nylon/nickel phosphate oligomer (NPO) nanocomposite (ENCC) was prepared via hydrogen bond crosslinking method. Due to the formation of hydrogen bonds between PO43− end groups of NPO with an average diameter of 6.5 ± 1.2 nm and NH groups on the nylon molecular chain, the phase compatibility is greatly improved. Hence, NPO was uniformly nano‐dispersed and had no obvious agglomerate in ENCC, inducing an invisible phase interface at nano‐micro scale. Nylon/nickel phosphate oligomer showed an excellent reinforcing effect on nylon, the tensile strength and elongation of ENCC reached 28 ± 0.8 MPa and 585 ± 26% at a high loading of 20 wt%, increased by 155% and 92%, compared with pure matrix, respectively. Furthermore, ENCC was still optically transparent and had excellent anti‐blue‐light performance (up to 96.6%).Highlights: Novel inorganic/nylon composite prepared by hydrogen bond crosslinking method. Phase separation and aggregation problems were solved remarkably. Inorganic metal phosphate dispersed with a diameter of 6.5 ± 1.2 nm. The composite was still transparent at 20 wt% loading of metal phosphate. Tensile strength and elongation increased by 155% and 92%, respectively.